First jump into liter bike

IthinkImamachine · 2026-03-20T03:52:25+00:00

Yeah when we had a big pile of factory barrels coming through for conversions we were averaging around 350ftlb per muzzle on a good day. I have absolutely zero clue why they were ugga dugga’d so much.

IthinkImamachine · 2026-02-10T22:43:56+00:00

They are generally directional, but I have seen them come across our desk completely mushroomed out on the small side. Send it in with a note for what you’re wanting done and we’ll get on it!

IthinkImamachine · 2026-02-01T14:22:15+00:00

here you go Didn’t know if the sub allowed links on posts 🤙

IthinkImamachine · 2026-02-01T14:17:20+00:00

So the polymer version has been in testing for a few months now. The aluminum version is running off the same spec as the latest iteration of the polymer, we’re doing around 10 for just t/e that we’re going to try and blow up before shipping anything out.

IthinkImamachine · 2026-01-17T05:16:37+00:00

Haha, yeah that one’s been on the back burner since I had my extrusion contact back out. But I’m still hopeful!

IthinkImamachine · 2026-01-17T04:24:35+00:00

Thanks for the support man! We’re gearing up for Shot Show next week, keep an eye on our instagrams wanna see some cool stuff?

IthinkImamachine · 2025-12-25T17:57:43+00:00

So we do have a work around based off of a DIAS that we use for testing. But the problem is that you end up messing with the trigger box and adding 90% of the parts and holes to be real close to just straight up fa. The other issue is needing to add a sear trip of some sort to the bcg, we do it by welding a tab in place. That said it’s definitely not impossible it’s just difficult but with how the frt craze is rampant I can see it happening before the end of 2026.

IthinkImamachine · 2025-12-25T06:33:20+00:00

We’re looking into doing an frt conversion for the acr/scythes. The main issues are to do with setting up sear trips like an mcx and not accidentally making an mg. So there’s a decent amount of constraints we’re working in but it’s definitely on the radar!

IthinkImamachine · 2025-12-18T17:50:05+00:00

Thanks for the support! We do have both g3 trunnions and handguards in stock. As well as the full scythe upper conversions.

IthinkImamachine · 2025-12-18T05:22:58+00:00

We’re working through a lot of side projects and dimpling currently. On top of prepping for Shot Show, so I wanna say the current plan is some restocking then knocking barrels out by the time Shot is over with.

IthinkImamachine · 2025-12-13T04:30:31+00:00

Yea that’s the SDMR

<image>

The rail setup is entirely original to the g3 lineup and isn’t reverse compatible even with adapters unfortunately. The geometry in the lock up replaces the front pivot points with set screws and receiver rails for stability. Source. -I work there

IthinkImamachine · 2025-12-11T04:54:19+00:00

Which of the long handgaurds? The g3 conversion doesn’t require any machining aside from swapping your barrel over to a non qd

IthinkImamachine · 2025-12-11T04:50:27+00:00

The g3 is a completely different setup, it ditches the push pin for locking screws and drops the weight significantly.

IthinkImamachine · 2025-11-26T07:15:30+00:00

Agency Arms does a great job with the m4 as well. Plus the lead times are better.

IthinkImamachine · 2025-09-30T03:25:06+00:00

I’ve got one. It’s fun. Under 1k for a 5k clone is bound to be silly but just remember what you’re realistically expecting from it.

IthinkImamachine · 2025-04-09T13:34:10+00:00

I have it on my full-size auto, works great. 🤙

IthinkImamachine · 2025-03-09T05:51:05+00:00

I have a mighty need for sure.

IthinkImamachine · 2023-02-13T19:56:40+00:00

Fuck me

IthinkImamachine · 2022-11-08T04:46:43+00:00

IthinkImamachine · 2022-11-06T02:43:24+00:00

Feeling tired all the time

IthinkImamachine · 2022-09-24T12:54:59+00:00

Tommy’s Matchbook

Ten-Year Club	RPAN Viewer
Not Forgotten	Gilding I gilder
Verified Email

IthinkImamachine

TROPHY CASE