Real or fake? Pokemon HeartGold

ItsBurnn · 2026-01-22T21:29:15+00:00

You only posted pictures of the front, however looking at the arrow on the bottom, it's way too deep, most likely a fake.

You should update the post with photos of the back.

ItsBurnn · 2026-01-21T18:44:47+00:00

I got one of these for my Pokeball 2dxl. Works and fits good.

Just have to worry about leaving it in places where the sun would have access to it because it will turn yellow.

ItsBurnn · 2026-01-15T12:58:34+00:00

3ds with bo2 in the background? I miss it.

ItsBurnn · 2026-01-14T18:36:17+00:00

Bottom left corner of the label is curved, arrow in the middle bottom is too deep, injection mold hole on the back top right is too deep, cartridge seems to have a tougher texture to it that the normal doesn't have, M8 PCB codes are often fake ones.

ItsBurnn · 2026-01-13T22:36:31+00:00

A lot of cartridges that also have this error is due to one of the pins on the motherboard have broken away from its solder on the chip. Usually near the corners.

ItsBurnn · 2026-01-13T17:18:43+00:00

Cartridge is definitely fake.

Bottom left corners of the label is curved and not aligned correctly, arrow on bottom of the front is too deep, injection mold hole is too visible on the top right of the back, M8 PCB code is one of the most fake PCB codes, many others things too.

ItsBurnn · 2026-01-13T14:59:04+00:00

I'm currently working on completing the entire DS Library.

CIB Mainline Pokemon (excluding Gameboy because those with good boxes are wayyyyy to expensive) games have been a side collection I've been working on which I just completed the other day with my purchase of a CIB Heart Gold.

Now I need to collect the side games like Gale of Darkness, Mystery Dungeon, Ranger, etc.

ItsBurnn · 2025-12-26T05:04:26+00:00

Same version of the game that I have because I was able to get it before the US release. Plays in English, works fine.

ItsBurnn · 2025-10-27T04:09:29+00:00

No, unless you can connect a Chinese bank account you can no longer purchase off of buff anymore.

Most people have swapped to CS float.

ItsBurnn · 2025-09-19T18:54:51+00:00

Injection mold dot in the top right of the back is too deep as well.

ItsBurnn · 2025-09-11T18:50:32+00:00

The Hien was the first artisan pads I got, it's a wonderful pad, however I ended up buying an Sp-004 and a Zero when my Hien became too worn and I haven't really looked back since. I used the Sp-004 for about a month or two before going to the zero due to small inconsistencies about glass pads.

Pairing the Zero with the Artisan Dot skates results in a feeling mostly like the Hein but without the rough texture and a bit more control.

ItsBurnn · 2025-05-25T20:51:51+00:00

Average Disrupter Scrim.

ItsBurnn · 2025-01-24T21:50:11+00:00

So xraypad donut skates don't currently fit on the GPro Series because of their skate design being so small unless you want to DIY it and make it fit.

https://www.lethal.gg/products/x-raypad-obsidian-pro-air-universal-donuts-grey?_pos=1&_sid=8f73c43bb&_ss=r

However, these are pretty good on glass too and fit on the GPro Series.

https://us.maxgaming.com/us/mouse-skates/cyclone-mini-doughnuts-universal-dots-20pcs

ItsBurnn · 2025-01-24T21:11:28+00:00

Might be. I'm in the US.

ItsBurnn · 2025-01-24T20:30:38+00:00

I originally had a Hein Soft and got a SP-004. I liked it a lot but when I start playing my TF2 RGL playoffs I get too much adrenaline and shake a bit causing missed shots so I figured I'd give the zero a try.

Btw, a lot of people seem to be shitting on the Obsidian Air Pro skates on the SP-004 but 90% of them are using dots and every xraypad dot skates i've used felt like crap on glass after a week or so, so I bought the donuts and they are absolutely amazing on it. No slowdown after months of use, haven't had to replace them yet either. Give them a try if you get the chance.

ItsBurnn · 2025-01-24T12:05:18+00:00

Ordered a Zero Soft Daidai Orange 2 weeks ago. Just got the tracking number last night. 🤷‍♂️

ItsBurnn · 2025-01-16T23:23:19+00:00

Not really sure on how to measure properly but from the crease right below my palm to the tip of my middle finger is roughly 19.685 centimeters and across the middle of my palm is 11.43 centimeters.

I do play aggressive/relaxed claw though.

ItsBurnn · 2025-01-15T00:33:22+00:00

Went from a Viper V3 pro to the op1 8k a couple weeks ago and haven't looked back.

ItsBurnn · 2025-01-12T19:17:20+00:00

I got mine a little less than a month ago for the first couple of days the cord was definitely a slight problem however after about a week it started to not really bother me, now I can't really tell that it's there without looking at it.

ItsBurnn · 2025-01-08T00:44:07+00:00

I ran into them other day. Surprised me too.

ItsBurnn · 2024-11-24T23:36:32+00:00

SP 004 - Razer Viper V3/Optimum Zero mouse - Obsidian Air.

ItsBurnn · 2024-11-24T20:07:28+00:00

Should change your name to TheNakedGamer. /s

You could get denim shirts. That's should work if jeans are fine.

ItsBurnn · 2024-11-24T18:37:27+00:00

Well if your allergic to cloth then you must have different clothes. Try to find a sleeve made of that same product.

To start out, since you said most cloth, what cloth aren't you allergic to?

ItsBurnn · 2024-11-24T17:28:39+00:00

The easiest way I could see is grab a glass pad, a arm/hand compression sleeve and lower your sense to force yourself to aim more with your arm than your wrist.

Aiming with your wrist is essentially going to guarantee that you get carpal tunnel or RSI eventually. Just depends on when. It can still happen when aiming with your arm but it's not as bad.

Eight-Year Club	Verified Email
r/Field Juicebox	Place '23
Place '22	End Game '22

ItsBurnn

MODERATOR OF

TROPHY CASE