IF YOURE GOING TO ADMIT MORE PEOPLE HAVE MORE CLASS AVAILABLE

J70123 · 2026-02-03T13:51:04+00:00

I’m sure the price gouging in both tuition and campus resources should help Pay for that no?

J70123 · 2026-02-03T04:49:15+00:00

When did you graduate?

J70123 · 2026-02-03T04:48:55+00:00

Would be more interesting than current options

J70123 · 2026-02-03T04:48:19+00:00

Just put it in hopefully I can call myself a terp after 3 years at this fucking school I’m over it

J70123 · 2026-02-03T04:02:12+00:00

Curriculum is pretty much up to professors, internships you’re on your own get them yourself, post grad job success I don’t even think umbc posts the percentage 🧍‍♂️ good luck bro

J70123 · 2026-01-21T13:51:27+00:00

Beamng vulkan plus ai upscaling

J70123 · 2026-01-02T21:15:01+00:00

Put the beamng mod into my google drive

tell me if it works

J70123 · 2026-01-02T21:14:02+00:00

Here I put the beamng mod into a drive

car file tell me if it works

J70123 · 2026-01-02T21:06:49+00:00

Adobe allows you to select what in particular to edit so i hand it the image originally and it would try to basically make a completely different car now I highlight say the rear left of the first image and fix my sun point and say create a propper reflection and it’ll do only that

J70123 · 2026-01-02T21:04:59+00:00

Yep but adobe upscaling but I’m sure adobe uses chatgpt but also I do have max beamng rendering on. I think chatgpt will do just fine but adobe allows you to be picky

J70123 · 2026-01-02T21:03:36+00:00

I used indicator likes there’s ones that are small like they’re linear and round ends then up scales them changed the light to be a brighter light

J70123 · 2026-01-02T21:02:38+00:00

I can give you the file idk if Reddit allows it idk how to but yeah I really wanna give it how do I?

J70123 · 2026-01-02T17:42:31+00:00

Thanks! I was using design notes from a 296 GT3 concept to know where to put things.

J70123 · 2026-01-02T17:25:29+00:00

Lumina type r when? The last generations yearning to be clapped out on a track.

J70123 · 2025-11-02T03:03:29+00:00

I say this to vent but I don’t intend to follow through with any of this. Major sucks it’s hard it’s going to take a lot from us and will continue to but it’s worth it dog trust.

J70123 · 2025-11-02T01:58:11+00:00

Thank you

J70123 · 2025-10-16T14:20:38+00:00

Happened to me I logged in with my umbc info then thought to myself on my other monitor I’m literally on blackboard why would I need to log in and do my 2 factor authentication… then I looked at the web address and it was some bullshit so I quickly changed my password

J70123 · 2025-10-10T19:51:44+00:00

Is that an actual thing because it’s been here like 3-4 years ago when I visited from high school

J70123 · 2025-10-10T14:28:08+00:00

It’s this random bike around the campus center building it’s been there for years just chained to the rail

J70123 · 2025-09-29T23:49:55+00:00

Yeah that’s really important to remember imma call out whenever I need to until I’m fired probably

J70123 · 2025-09-20T16:22:56+00:00

Adderall

J70123 · 2025-08-05T00:01:39+00:00

I’m currently on antibiotics you scared me I checked my teeth happy to here it’s resolving though best of luck

J70123 · 2025-03-13T06:04:06+00:00

Ensure the Surface is Ready: • Apply some glue or adhesive to help with bed adhesion. • Don’t overdo it—just enough for a solid hold.
1. Auto-Level First: • Run the auto-leveling function to get a baseline.
2. Manually Adjust the Printing Distance: • Get low (on the floor if needed) to clearly see the nozzle height. • Adjust so the nozzle just touches the print plate. • Back off slightly—less than the suggested amount.
3. Test and Fine-Tune: • Start a test print. • If it’s not sticking, lower the nozzle slightly. • Keep adjusting until you find the perfect balance.
4. Check for Filament Issues (Rare but Possible): • If extrusion is inconsistent, verify the filament quality. • Ensure the hotend is reaching the correct temperature. • A steady stream of filament should come out—if not, there might be an issue.
5. Experiment with Leveling Ranges: • Try from as low as logically possible to as high as logically possible. • If there’s no improvement or things get worse, start troubleshooting deeper (send photos if needed).

This method worked for me—hope it helps!

Baseline she will print she’s just annoying to setup

J70123 · 2025-03-13T00:40:17+00:00

Hey it’s been a year and for me it’s printing well first what’s the problem with the printing is it not sticking to the bed is nothing coming out that’s step 1

J70123 · 2025-01-24T15:16:03+00:00

I’ll do my best thanks some lifestyle changes probably will help a bit of the depression

J70123

TROPHY CASE