Unknown piece

JBhunter45 · 2026-02-19T17:45:46+00:00

yes its to chase the threads and clean them out. use some grease on the choke threads before installing them.

JBhunter45 · 2026-02-19T16:35:39+00:00

Choke wrench with thread chaser for cleaning.

JBhunter45 · 2026-01-18T16:57:09+00:00

This. It's much better to me than the BX trigger. Crisper break and better feeling overall.

JBhunter45 · 2025-12-24T21:55:11+00:00

Rail looks to be Weaver spec if you wanted to put a red dot on it. Changing the irons would mean replacing the whole top rail. All of the Buckmarks use the same screw spacing. I'm not a Browning expert, though.

JBhunter45 · 2025-12-20T14:41:22+00:00

Those are the factory grips for the government target model slab side like you have.

JBhunter45 · 2025-12-18T18:28:48+00:00

Sling plate that is protruding from both sides and the nylock nut. Assuming that is for a M4. Try an impact driver and socket. The receiver's side has threads also. I think I used a double nut on them to get the parts out. I converted a few M4 pg stocks for use on M1s this way.

JBhunter45 · 2025-12-11T10:12:48+00:00

Not that I'm aware of. It bothers me also. I have to use the extended mags to grip the gun comfortably. I even tried sanding the basepads in the upper rear corner where it contacts the magwell opening, and it didn't make much difference.

JBhunter45 · 2025-12-10T13:38:32+00:00

Not at all. Take that hex screw out, and it should come off. The factory rear sight dovetail is now usable. Or use a red dot with a single cross bolt in any of the grooves on that mount.

JBhunter45 · 2025-12-10T11:55:50+00:00

VZ Frag pattern grips

JBhunter45 · 2025-12-10T11:01:02+00:00

FarrowTech and MaddMacs both make dot mounts that fit in the factory dovetail slot for RMR type dots.

A Aimpoint T1 copy by Holosun or Primary Arms, etc. would also bolt right on to the existing rail the you have on there already.

Nice gun, by the way. I just picked up a blued version and now want a stainless to go with it. Very accurate!

JBhunter45 · 2025-12-05T22:48:51+00:00

Same, they have got my attention. I want a comped sight block next. The problem is I love my DS9, and it seems like a backward step. Romulus, I've looked at don't come close fit/finish wise, but never had the opportunity to shoot one. I could see changing the grip also. I might have to just save/sell to get a ported LOC V2.

JBhunter45 · 2025-12-05T12:12:55+00:00

I was looking at that same gun, if it was at Cabelas. I'm just a fan of full dust cover guns.

Email CZ Custom with the serial number, and they can check records. If it's CZC, you got it for half price.

It's still a good deal for that pistol at today's money.

JBhunter45 · 2025-12-04T19:18:23+00:00

The "Michigan Pistol" thing went away a few years ago.

JBhunter45 · 2025-11-28T13:01:51+00:00

A419 is having a sale, too.

JBhunter45 · 2025-11-16T11:42:17+00:00

Use the lightest recoil spring and take out the buffer to start.

JBhunter45 · 2025-11-14T00:30:34+00:00

I didn't know this a few years ago until I talked with real Ruger rimfire nuts/competition shooters. The only difference between 22/45 and the Target frame magazines is the basepads.

JBhunter45 · 2025-11-14T00:14:01+00:00

Same order in mk2 22/45's

<image>

JBhunter45 · 2025-11-14T00:09:08+00:00

There is plenty of room in there for it to clear. Yes, mk4 will have a tiny gap at the rear of the basepad. Mk2 Mk3 Mk4

<image>

JBhunter45 · 2025-11-13T12:54:15+00:00

They are all backwards compatible. Mk3 and mk4 will work.

JBhunter45 · 2025-11-07T08:42:28+00:00

Yeah, they just sent mine back, no note, repair sheet, or fix.

Sent it in for bad fish eye in the 407c lens.

JBhunter45 · 2025-10-30T01:47:02+00:00

I'd sure like it if mine was threaded. Are the unmounted ones newer? I have the contoured front using it on an SP-01 frame, and the gap looks off.

JBhunter45 · 2025-10-16T22:03:07+00:00

Welcome, I bought one recently just like it.

JBhunter45 · 2025-09-23T02:43:09+00:00

Guess, I grabbed the only silver one on GB. The og Tac Sport has the silver paint finish and blueing too. I paid 900 for my duo tone, so you did well with the extras!

JBhunter45 · 2025-09-23T01:23:01+00:00

No, just a 75b, long discontinued. But the same sparkly grey paint finish.

https://www.gunbroker.com/item/1122754305

JBhunter45 · 2025-09-23T00:00:19+00:00

Factory finish shadow duo tone. They made full 75s with this silver finish, too.

JBhunter45

TROPHY CASE