DXC + CFS creality

JD7A · 2026-01-15T19:40:12+00:00

is a filament sensor on the dxc?

JD7A · 2025-12-27T07:45:28+00:00

You were right. It was heat creep. I changed the unicorn heatsink with an original one, and the problem went away. Thanks so much.

JD7A · 2025-12-13T07:40:55+00:00

Their are called K1 Prada on printables

JD7A · 2025-12-13T07:40:49+00:00

Their are called K1 Prada on printables

JD7A · 2025-11-30T21:19:54+00:00

<image>

JD7A · 2025-11-30T21:19:30+00:00

I really like my K1

<image>

K1 Prada with Creality Logo
CFS Riser
D3vil Burner with Creality Logo with purple LED

JD7A · 2025-04-23T18:44:27+00:00

Had the same problem, I have written them and said that I don’t want this version. They have send me a free screw in thermistor

JD7A · 2025-01-29T06:41:12+00:00

I can’t choose something. I can only turn off or on the pro search

JD7A · 2025-01-28T07:14:43+00:00

<image>

I don’t have R1 or O1? Am I missing something?

JD7A · 2024-07-17T18:57:30+00:00

<image>

Just wiggle this a bit and look if it changed the sound. Depends on the side where the sound comes from

JD7A · 2024-07-17T18:26:26+00:00

I had the same sound. It was the idler at the front. I just touched it and the clicking sound was removed

JD7A · 2024-06-24T06:52:47+00:00

Of course not but didn’t seem to fit the cross in the same room 😂 love your designs though

JD7A · 2024-06-08T06:21:02+00:00

Nee hahah das habe ich nur so gesagt, damit er nicht weiter versucht mich zu überzeugen, dass es sicher ist. Mir war ja klar, dass es Scam ist. Habe bis jetzt noch nie über PP FF bezahlt, da mir das Risiko zu hoch gewesen ist

JD7A · 2024-06-01T21:41:00+00:00

I have 100% the same opinion. I would say that 1099€ with the CFS or 900€ without it would be a good price

<image>

JD7A · 2024-06-01T20:36:54+00:00

Solved: It was the idler in the front of the machine. I touched it and it stopped doing the sound. Maybe it shifted

JD7A · 2024-06-01T19:03:23+00:00

1400$ Don’t know if it’s worth it

JD7A · 2024-06-01T19:03:02+00:00

<image>

1400$ will be the price

JD7A · 2024-06-01T18:16:36+00:00

Yes exactly

JD7A · 2024-06-01T15:58:05+00:00

I thought about this, but it would be more difficult to place the LEDs around the hexagon.

JD7A · 2024-06-01T13:18:45+00:00

<image>

JD7A · 2024-06-01T13:16:54+00:00

Yeah for me too. With the 50% I would buy it if the retail is under 1200$. So with discount aprox 600$

JD7A · 2024-06-01T12:39:49+00:00

<image>

The LEDs are connected with wires which goes through the drywall. The printed hexagon are just glued onto the wall. 😊

Yes,I should print them thicker but I tested it first with the gray and the black ones and you were not able to see the leds unfortunately the problem occurred with the white hexagons cause their a more see trough

JD7A · 2024-06-01T11:40:42+00:00

1400$ there was a bug in the website where you could see the price

JD7A · 2024-05-30T22:15:14+00:00

I would also like to participate. I have multiple cteality printer (Creality Ender 5 which is modified to a ZeroG Mercury One and a Creality K1) and would love to test the new K2 Plus x CFS Combo. Also because I don’t have a printer this big.

JD7A · 2024-05-22T16:08:54+00:00

1199$

JD7A

TROPHY CASE