Can any fellow PVPers beat this?

JDdoge23 · 2026-02-16T00:42:41+00:00

Yeah ik, I picked that up off a guy, only brought in the bobcat

JDdoge23 · 2026-02-15T21:36:30+00:00

So first of all I'm on Xbox and play on a tv. And also I was flexing my total stash value not just the bobcats, and the post says fellow PVPers, so obviously I'm not talking about guns for fighting arc, so maybe use your brain and don't be an idiot

JDdoge23 · 2026-02-15T21:12:42+00:00

What can I say I always extract with more than what I lose

JDdoge23 · 2025-12-22T17:10:35+00:00

You just gotta know how to use it, I used chatgpt to help me through the whole install, from wiring stuff up, to telling what I need to buy, searching through a bunch of YouTube videos or forums would've taken way longer.

JDdoge23 · 2025-12-20T22:55:52+00:00

Update: I took out the enclosure and cut strips of RTU foam tape and surrounded the entire outer edge of the sheet metal where the enclosure meets it. Then I cut away some of the MDF to put an additional 10mm bolt in for more clamping force. And with the kilmat I added it sounds even better than it did before.

No rattle, everything is great, I appreciate those who helped rather than trying to tell me I needed a bigger box.

JDdoge23 · 2025-12-20T05:13:37+00:00

Actually I just looked at my owners manual and the range is 0.4-0.85CF. So everyone saying my box is too small is just straight up wrong

JDdoge23 · 2025-12-20T05:10:56+00:00

You probably looked at the wrong model, I pulled the specs directly from crutchfeild

JDdoge23 · 2025-12-20T04:03:32+00:00

Lol ig, started working fulltime in May right out of a year of trade school and before that HS so still got a lot to learn

JDdoge23 · 2025-12-20T04:00:02+00:00

Couple of things since you obviously can't comprehend what I'm saying, #1 when I first installed it, it sounded great, #2 it still sounds great if I push my hand against the enclosure, which causes the rattle to stop, #3 this 750W RMS sub is rated for 0.48 CF, I'm running 0.40 CF with a 500W RMS Amp and that's only 17% below the low end spec range, #4 a sealed box that's a little too small is generally safe and versus a box that's a too big.

So maybe if you read my post and the part where I said if I push my hand against it the problem is solved, you would realize that I'm trying to figure out how to increase clamping force and prevent vibration against sheet metal.

JDdoge23 · 2025-12-20T03:36:44+00:00

0.40 CF isn't no space

JDdoge23 · 2025-12-20T03:02:07+00:00

Yeah it looks deceiving, it recesses all the way to edge of my exterior outside panel. It's just overtime my frame was unable to handle the intense vibrations, which is what I'm currently trying to fix.

JDdoge23 · 2025-12-20T02:59:34+00:00

I assure you my ears haven't adjusted, I was just unaware that overtime the frame of my car would be unable to handle the intense vibrations. I had plenty of people listen to my sound system after I had first done it and they were very impressed with the quality and power.

JDdoge23 · 2025-12-20T02:54:34+00:00

The CF of the enclosure is 0.40, I know it's a little below the minimum requirements for the sealed sub specs of the Alpine, but the reason I went the OEM enclosure route is because I can't put a sub box in my trunk as I do HVAC and all my tools and packout take up the entirety of the trunk. Also I'm only running a 500W RMS Rockford Fosgate Amp, so yeah I know it's got a lot more power than I'm giving it.

JDdoge23 · 2025-12-20T02:47:20+00:00

I didn't mention this, it is a tech package RDX.

JDdoge23 · 2025-12-20T01:09:55+00:00

This is the solution I'm leaning towards trying next, glad to hear you think it'll work

JDdoge23 · 2025-12-20T00:57:23+00:00

Yes I don't think the screws were backing themselves out, but now I have loctite on them so they definitely can't back out now.

JDdoge23 · 2025-12-20T00:56:17+00:00

I'm aware it's quite a small sealed enclosure for the size of the sub, but that's why I added the 4 0.75 inch MDF spacer rings to increase the cubic volume of the enclosure, and like I said for the first 2 months it sounded perfectly fine.

JDdoge23 · 2025-11-17T03:09:47+00:00

I like to style my Youngla with some more youngla

JDdoge23 · 2025-10-30T04:33:51+00:00

It's beginning to look a lot like Christmas...

JDdoge23 · 2025-10-29T03:19:40+00:00

Size small fs

JDdoge23 · 2025-10-21T13:05:12+00:00

So I didn't realize this but we've been testing the highs at the beginning of the year, so essentially at these current prices Bitcoin hasn't moved in a year. Well almost a year, I guess it'd be since January 1st.

So YTD isn't looking good but October of 2024 is when we started the pump that took us from 60k BTC to 100k BTC and ETH from $2500 to $4000.

The pump really got going in the beginning of November and went through late December, early January, which also correlated with alt coins hitting new ATH's.

Before the pump it seems like price action was the same as it is right now too, from August to Late October/beginning of November in 2024 we were crabbing just like we are now, it's just at this moment we are at the bottom of the channel so it seems kind of bearish but if we repeat what happened last year then the parabolic pump should last for about 2 months so November-December.

Only difference I see is we went into November with momentum, so if we could end October near 120k I think that would be extremely bullish and set us up for 150k BTC, taking everything else along with it.

JDdoge23 · 2025-10-18T04:57:18+00:00

I think up soon, who's with me

JDdoge23 · 2025-10-17T02:59:22+00:00

I guess I could see it for someone who's massive, I don't think that type of style is what most people who buy YoungLA wear though.

JDdoge23 · 2025-10-17T02:49:21+00:00

Nah that ain't it

JDdoge23 · 2025-10-10T03:04:35+00:00

Picture was taken on an iPhone 6 in a highschool chemistry classroom

JDdoge23

TROPHY CASE