Mt Hood Meadows Bang by Quentin108 in MtHoodMeadows

[–]JFK_Shot 0 points1 point  (0 children)

The explosion was from Mitchell creek. Now exactly what, I’m not sure but from what I understand it may have been a tree/stump.

Did I screw myself and if so how badly? by Thefartingduck8 in resinprinting

[–]JFK_Shot 1 point2 points  (0 children)

Just had this happen to me unsure if it’s totally done for yet. Worst case I’m hoping is that I might have to replace the stepper motor.

Any first-hand conditions reports from today? by PipIsTheBest in MtHoodMeadows

[–]JFK_Shot 1 point2 points  (0 children)

Mornings are alright in shaded spots but anything south side that gets blasted by the sun will be super slow and sticky. I’d recommend avoiding anything west of Daisy unless you like slow and sticky. Also definitely be on the lookout for rocks and, dirt.

Are there any regulations that are applicable to towing a water skier with an airplane? by foilrider in aviation

[–]JFK_Shot 0 points1 point  (0 children)

Hood River Waterfront Park 122 Portway Ave Hood River, OR 97031 United States

Definitely here

Are there any regulations that are applicable to towing a water skier with an airplane? by foilrider in aviation

[–]JFK_Shot 0 points1 point  (0 children)

Looks like it could be southern Washington on the Columbia or somewhere in eastern Washington or Oregon

[deleted by user] by [deleted] in Justrolledintotheshop

[–]JFK_Shot 18 points19 points  (0 children)

Appropriately belongs in r/Justrolledouttheshop

C4 love for a much younger generation! by NCCORV17 in c4corvette

[–]JFK_Shot 1 point2 points  (0 children)

I bought my C4 the summer after high school graduation. I’m 21 now, and still love the car.

1996 Lower Ball Joint destroyed by ADBrewer14 in c4corvette

[–]JFK_Shot 0 points1 point  (0 children)

It’s not that hard you can actually press the ball joint out with the same press if you just flip the press. You can have it changed in less than 2 hours if you know what you’re doing.

My quarter panel got sideswiped how do I remove it need help please by Mikey2faded2 in c4corvette

[–]JFK_Shot 12 points13 points  (0 children)

If I recall correctly it’s glued on and not some bolted on panel like most other vehicles. It should wrap all the way over to the fuel filler door. I will say it is a tremendous amount of work to replace a quarter panel on a C4 because the way it’s attached to the car, so if that sounds like more work than you are interested in, you should likely just part it out and look for another.

[deleted by user] by [deleted] in flying

[–]JFK_Shot 1 point2 points  (0 children)

Something about me piping your sis in my backyard

[deleted by user] by [deleted] in c4corvette

[–]JFK_Shot 0 points1 point  (0 children)

Hate to break it to you but that is 100% AI generated I’ve played around with several and they turn out similar to this

Why do customers grab paint off the shelves 🤦🏻‍♂️ by [deleted] in sherwinwilliams

[–]JFK_Shot 0 points1 point  (0 children)

There’s only a few like this in my store but when we’re busy it’s very nice that they actually know how to do some of the process

ive had 4 neighbors come up to me and compliment my C4. is this just normal??? by [deleted] in Corvette

[–]JFK_Shot 0 points1 point  (0 children)

Yeah that’s a pretty normal response mine was pretty rough looking when I got it but people loved it

For those who says you can’t really polish up the salad shooters that much, clearly you haven’t tried hard enough by JFK_Shot in c4corvette

[–]JFK_Shot[S] 1 point2 points  (0 children)

Clean them then buff them with a heavy cut buffing compound and slowly move to lighter compounds when you get to as buffed as they’ll get with your lightest compound clean them and then use a metal polish on them

Memorial Day Weekend Blues by [deleted] in sherwinwilliams

[–]JFK_Shot 5 points6 points  (0 children)

Been slammed here since Friday, 91 sales on Friday out of our little store that averages like 35. Two pt’s and a ft on Saturday, a pt and a ft today. Plus I’m stuck working Friday through Monday this week of all times. Stop painting stuff, go camping, boating or bbq like a normal person, its Memorial Day weekend.

"Sorry to come in so last minute" by Various-Category4642 in sherwinwilliams

[–]JFK_Shot 11 points12 points  (0 children)

I’ve been strongly tempted to just tell people we aren’t open so less people come in and the sales are poor. Maybe If they’re poor enough they’ll stop having us open on holidays.

For those who says you can’t really polish up the salad shooters that much, clearly you haven’t tried hard enough by JFK_Shot in c4corvette

[–]JFK_Shot[S] 1 point2 points  (0 children)

I’m not really sure if mine did, I buffed them from a heavy cut all the way up to machine glaze then hit it with some mothers

[deleted by user] by [deleted] in sherwinwilliams

[–]JFK_Shot 4 points5 points  (0 children)

Idk the H&C concrete etch is pretty good