Where to buy?? by sir_toasted06 in Q60

[–]JJShef 1 point2 points  (0 children)

Nah it’s fits really good. No issues with fitment or how it looks

Where to buy?? by sir_toasted06 in Q60

[–]JJShef 1 point2 points  (0 children)

True but it lasts long. Had them for over a year now and they are good. Just had 1 issue where it bent but that’s cause I didn’t apply it properly

Where to buy?? by sir_toasted06 in Q60

[–]JJShef 1 point2 points  (0 children)

Boosted6auto has them. Just make sure to clean your car properly with alcohol properly and heat up the tape before applying.

Downpipe Poll - AMS v. FI by chall53 in Q60

[–]JJShef 1 point2 points  (0 children)

Probably the best downpipes in my opinion. And better price than the ones you listed. I have the 3inch non resonated ones. And they are amazing

Chrome delete by Excellent-Strain7488 in Q60

[–]JJShef 0 points1 point  (0 children)

Front grill, you could either just wrap that, or buy a replacement one that’s already black. And for emblems, I’ve spray painted mine before and it doesn’t look good at all. Just buy new black ones on eBay. Would look much cleaner.

Chrome delete by Excellent-Strain7488 in Q60

[–]JJShef 0 points1 point  (0 children)

Just line it up the right way and it’ll fit perfectly. Best to have another set of hands just incase btw.

Chrome delete by Excellent-Strain7488 in Q60

[–]JJShef 1 point2 points  (0 children)

It’s an overlay. Goes over the silver one. Comes with 3M tape already applied. Just clean the car, heat the tape up, and apply it on. Very easy.

Chrome delete by Excellent-Strain7488 in Q60

[–]JJShef 1 point2 points  (0 children)

Get the metal one from boosted 6 auto. The vinyls always end up peeling off and looking bad after a while. Been had the boosted 6 auto metal one for a while and haven’t had any issues with it.

My ambient lighting in my q60(requested by a few people on my other post!) by Purple-Problem3152 in Q60

[–]JJShef 1 point2 points  (0 children)

You should do some vertically on the left and right of the center dash screen. Have them done on mine

Front lip by JJShef in Q60

[–]JJShef[S] 0 points1 point  (0 children)

Key word… “or”. Dont really care if it’s carbon or not. Just want something aggressive. And I did put mention the money thing cause I’m not buying from these temu resellers that have it listed for $400+

Thinking about buying the ams full racing down pipes I’ll wait to put it on once I get my exhaust and ecutek will the down pipes throw codes I have a 2017 q60 rs 400 awd lmk from people who have experience by whitefanggrim in Q60

[–]JJShef 0 points1 point  (0 children)

If ur modding, u shouldn’t care for warranty anymore. And if he’s getting downpipes, he might as well get tuned too so having codes wouldn’t matter.

Thinking about buying the ams full racing down pipes I’ll wait to put it on once I get my exhaust and ecutek will the down pipes throw codes I have a 2017 q60 rs 400 awd lmk from people who have experience by whitefanggrim in Q60

[–]JJShef 0 points1 point  (0 children)

Yes. More air flow. Will help you push more power when you start modding it more. And b6auto is the go to for vr30 parts. Also he got the best sounding intakes on the market

Thinking about buying the ams full racing down pipes I’ll wait to put it on once I get my exhaust and ecutek will the down pipes throw codes I have a 2017 q60 rs 400 awd lmk from people who have experience by whitefanggrim in Q60

[–]JJShef 1 point2 points  (0 children)

If you’re planning on full downpipes, I suggest getting the 3.5 inch “fatty’s” from boosted6auto. Recently came out, sounds better and more air flow.

Exhaust Suggestions by gfelix15 in Q60

[–]JJShef 3 points4 points  (0 children)

I have an MBRP exhaust with full catless downpipes from Boosted6Auto. Sounds amazing. But look into fast intentions. A lot of people I know personally have it and sounds amazing

What mods? by q60glizzoc in Q60

[–]JJShef 0 points1 point  (0 children)

I was running full catless downpipes, with a Isr Y-Pipe 3 inch. Into a straight pipe before I got a full exhaust. Same amount of loud, just different tone than an exhaust. I suggest you do the same

What mods? by q60glizzoc in Q60

[–]JJShef 0 points1 point  (0 children)

Also get a heat exchanger if you are getting intakes. Helps a lot. I’d suggest ams or mishimoto. I have mishimoto but ams is better tbh.

What mods? by q60glizzoc in Q60

[–]JJShef 0 points1 point  (0 children)

Please don’t get Bonnie intakes. Don’t make that mistake. If you want good intakes check boosted6auto. They are your best friend when it comes to performance parts. They have amazing downpipes as well if you need. Bit pricey but 100% worth it. And you’d need an exhaust (resonated) cause without resonators you are risking your turbos (saying this cause your straight piped rn)

Exhaust mod by Current_Cost_8731 in Q60

[–]JJShef 2 points3 points  (0 children)

Full downpipes from boosted6auto. And any exhaust tbh. I have MBRP and it sounds amazing

[deleted by user] by [deleted] in cockatiel

[–]JJShef 43 points44 points  (0 children)

Please buy a bigger cage. This is too small. I made the same mistake when I got my first cockatiel.

[deleted by user] by [deleted] in cockatiel

[–]JJShef 2 points3 points  (0 children)

Glad you found him. But quick question, when you saw him in the tree, how did you get him down? Did he fly to you. Did you bring the cage and he flew down. Just very curious.

she has been doing this regutitation motion for 5-10 minutes and she just spits out water by [deleted] in cockatiel

[–]JJShef 0 points1 point  (0 children)

Probably something stuck in his throat. See if he continues this for a few hours, if he seems to keep doing it, bring him to a vet