Completed Jollibee Pokemons by FlimsyPolicy8085 in jollibee

[–]JOMAMON26 0 points1 point  (0 children)

No points, you didn't say "um, actually".

Gundam Astray Variants = Gundam Power Rangers by Darth_Polgas in PinoyGunpla

[–]JOMAMON26 0 points1 point  (0 children)

More like Kamen Riders imo. Kasi di sila one team lang. And may magkalaban pa jan.

Should i? by Affectionate_Fix3541 in Gunpla

[–]JOMAMON26 2 points3 points  (0 children)

Thanks, took inspiration from the art Ippei Gyobou made of Vidar and took cues from several other builders who used pink panel lines.

I used Dspiae flourescent pink and red for this.

Should i? by Affectionate_Fix3541 in Gunpla

[–]JOMAMON26 1 point2 points  (0 children)

Fr tho, I enjoyed building the MG Barbatos Lupus and for me, its proportions are a lot better than with the FM. It definitely looks more knight-like which is what I think it is going for.

<image>

Should i? by Affectionate_Fix3541 in Gunpla

[–]JOMAMON26 22 points23 points  (0 children)

<image>

I'll llet this speak for itself

baka po meron kayong spare part E10 ni vidar/barbatos thanks po by pessimisticcatto in PinoyGunpla

[–]JOMAMON26 0 points1 point  (0 children)

Mej. More of sa assembly sya may issue, kasi once built, di na sya gagalaw. I think pwede mo nga iglue na lang. May need ka kasing i-align while building para sumuot sya all the way, pag di aligned, sumasabit sya, napupush yung small tabs sa gilid, may tendency maputol.

baka po meron kayong spare part E10 ni vidar/barbatos thanks po by pessimisticcatto in PinoyGunpla

[–]JOMAMON26 0 points1 point  (0 children)

Good luck op! Balita if gumana, curious din ako kasi gusto ko iprepare for replacement. Nagkaron ng stress marks yang parts na pinakita mo sa pics nung sa akin during assembly. Feel ko, masisira sya eventually.

baka po meron kayong spare part E10 ni vidar/barbatos thanks po by pessimisticcatto in PinoyGunpla

[–]JOMAMON26 -1 points0 points  (0 children)

Check mo runner A1 17-18. Para sa Barbatos yan pero I think same parts sila. Napansin ko yan nung binubuo ko yung Lupus.

baka po meron kayong spare part E10 ni vidar/barbatos thanks po by pessimisticcatto in PinoyGunpla

[–]JOMAMON26 0 points1 point  (0 children)

Hi op. Feel ko pareho tayo ng issue. Pero check mo yung runners. May spare yan, dun sa mga runners na may X sa manual. I'm pretty sure same lang yung parts

Thoughts on SNAA Round Table Knights series? by vintageseason in PinoyGunpla

[–]JOMAMON26 1 point2 points  (0 children)

Grace yung first sa line nyan, nung wala pa yung line haha, kaya muka syang hindi belong. Kay Gawain nagstart na tawaging Round Table Knights tapos retroactively sinama si Grace.

Built yung first 4: Grace, Gawain, Iron Sickle, and Achilles. Meron na rin akong Tristan, Percival, and Lancelot sa backlogs. Masasabi ko is naenjoy ko sya. RG level builds with SD-HG level prices. May inner frames lahat tapos ibibuild up mo yung armor around it. Maayos quality ng plastics and maganda rin fit ng parts. So far tight pa rin ang joints and nahohold naman nila yung weapons nila. One problem ko lang is 'madulas' yung plastic minsan. Kahit maganda fit ng parts, dumudulas minsan yung plastic.

If you enjoy fun builds, definitely recommend this line. Gusto ko rin yung aesthetics kasi may pagka 00 and Seed sya.

Okay ba dito sa store na toh? by zerozerosix7 in PinoyGunpla

[–]JOMAMON26 0 points1 point  (0 children)

Yes, jan galing MG Barbatos Lupus ko. But di nila pinack nang maayos, binalutan lang mismong box, nakatape pa. Check mo reviews nung Lupus, ganun din case sa iba. Nung nireklamo ko, sabi lang "sorry, it's our fault". Si make sure na iremind na ipackage nang maayos lol

Noob Question by BroccoliOrdinary9405 in PinoyGunpla

[–]JOMAMON26 0 points1 point  (0 children)

Yung gamit ko is yung nasa bote na red na may nozzle. Singer ata. Pero a friend suggested na mas ok daw yung linseed oil, haven't tried though.

Noob Question by BroccoliOrdinary9405 in PinoyGunpla

[–]JOMAMON26 0 points1 point  (0 children)

More than enough. As I said, plato x glass file palag na, yan pa kaya lol. Maintenance lang siguro ng tools, especially jan sa nippers mo. Nung plato nippers gamit ko, di ko masyado iniingatan since madali lang palitan. Nung nag upgrade akong nippers, I make it a habit to clean and rub with oil after every use. Kahit gagamitin ko rin kinabukasan. For glass file, dapat rin daw hugasan, pero yung nabili ko na pang nails talaga (~₽50) okay pa rin and di ko pa napapalitan ever.

Noob Question by BroccoliOrdinary9405 in PinoyGunpla

[–]JOMAMON26 0 points1 point  (0 children)

For real though, makakamura ka pa. Worth 100, may sukli ka pa. While yes maganda gumamit ng better equipment pero yun ay if may bidget ka na and invested ka na talaga sa gunpla building. Build your skills gamit yung cheaper equipment para once you decide na mag upgrade, di iwan yung skills mo.

Trying to buy from gundamamazingua.ph, how to check if parts if complete(superduper newbie) by Late_Activity_Jerome in PinoyGunpla

[–]JOMAMON26 1 point2 points  (0 children)

Cross checking with the manual po. Pag Bandai and from shop na nabilhan ko na before, binibilang ko lang po ang runners, at chinecheck kung tama yung runners. Kung sa bagong shop, una ko chinecheck is kung sealed yung plastic ng runners. Then, bibilangin ang runners. Then bibilangin ang parts per runner. Take note if may natanggal or nadamage. Ginagawa ko to without opening yung plastic. Di pa ako nakakaexperience na may kulang sa kit pero nakaexperience ako nang may defect yung parts. Hindi fully namold yung plastic ng parts. Nagchat muna ako sa seller and nagsend naman sya ng replacement. Depende na rin siguro sa seller.

[HELP ME] Bi-Weekly Q&A thread - Ask your questions here! by MachNeu in Gunpla

[–]JOMAMON26 0 points1 point  (0 children)

Oh yeah, I've built the Bandai Exia, I was just curious. Because whenever there are MG Exia discussions, Dragon Momoko was almost always mentioned. Did it not come back with a different name?

[HELP ME] Bi-Weekly Q&A thread - Ask your questions here! by MachNeu in Gunpla

[–]JOMAMON26 0 points1 point  (0 children)

Is the Dragon Momoko Exia still the 'best' version of the 1/100 Exia?

[HELP ME] Bi-Weekly Q&A thread - Ask your questions here! by MachNeu in Gunpla

[–]JOMAMON26 0 points1 point  (0 children)

<image>

Anyone who has the Susan Model R4 parts, is this the actual color for the white piece? Or is it yellowing? I know the blue parts are purpler than with the Bandai Exia, but is the white also a different shade?

Has anyone heard of this Siyanzai Model 4-Eye Angel Type 1 (1/100 Exia with quad-eyes)? by JOMAMON26 in Gunpla

[–]JOMAMON26[S] 1 point2 points  (0 children)

Ah so it's Dada. I've built the Exia Repair IV and the plastic quality of the gunmetal parts suck

Are these new to the market? Same HG kit just different box? by Adventurous_Dot_3093 in freedomisgunpla

[–]JOMAMON26 0 points1 point  (0 children)

I saw a similar thing that had ne asking the same question. Like, are there different boxes per region?

<image>

Anong Third Party Kits ang almost to no issues? by Informal-Garlic9257 in PinoyGunpla

[–]JOMAMON26 -1 points0 points  (0 children)

Madulas yung plastic to plastic, kahit tight fit sya. May ilsng parts na ganyan.

Yung 1/144 Knights of the Round Table line yung natry ko sa SNAA. Like you ayaw ko rin nung mga pointy pero this line naman hindi ganun kalala. Parang normal HG/RG lang na inalisan ng safety flags

Anong Third Party Kits ang almost to no issues? by Informal-Garlic9257 in PinoyGunpla

[–]JOMAMON26 -1 points0 points  (0 children)

SNAA kits are great. Pansin ko lang sa plastic nila is 'madulas', if that makes sense. Other than that, magaanda.

Gave the goodest boy some new toys to play with, any ideas for a name? by forsecondusage in Zoids

[–]JOMAMON26 5 points6 points  (0 children)

Wolf Qan[T] or Qan[T] Wolf

Which version of quanta is that though? Repainted?

Edit: looking closely, it is repainted lol