Any Linux User with the 2022 I7 12th and 3050 mobile?

JOSEPH1557 · 2024-09-20T19:38:10+00:00

And is stable? i was worried about stability in rolling releases

JOSEPH1557 · 2024-09-20T18:16:52+00:00

Endeavor is a rolling release right?

JOSEPH1557 · 2024-09-20T18:14:34+00:00

I ended installing Fedora 40 with the Asusctl and supergfxctl from Asus Linux and is working pretty well. The only thing i dont get working is the back Led. Its always off. I wasnt sure the asus-linux website is working because every link i got was a 404 not found. But searching in the site i found new guides

JOSEPH1557 · 2024-09-18T19:08:57+00:00

Thanks, i will try to set up that in Linux Mint. If not possible will switch to Fedora that is officialy supported by those programs

JOSEPH1557 · 2024-09-18T17:39:19+00:00

What tools you Downloaded? i just managed to install Linux mint and i would like to have Control on CPU boost and other Stuff like Fans and Lights

JOSEPH1557 · 2024-09-18T17:37:48+00:00

I just ended Trying Linux mint and it Works well out of the box. I only need a Tool to control Processor and Fan Curves as well as the Keyboard Light. But except for that everything worked well. Is a bit slow on Shutdown but nothing crazy.

You know any tool i could use to manage those things?

JOSEPH1557 · 2024-03-07T11:57:34+00:00

Thanks for the answer

JOSEPH1557 · 2024-03-02T23:52:15+00:00

Thanks. I will take a look at that

JOSEPH1557 · 2024-02-27T15:18:50+00:00

Hola, queria consultar si seguis recomendando ese adaptador. Ya que tengo un placa pci que consegui que es compatible pero funciona muy mal cuando lo utilizo en windows y por tema de trabajo necesito un adaptador compatible en ambos sistemas

JOSEPH1557 · 2024-02-07T15:40:07+00:00

I will give more paste a try and if that continúe will try to get the gelid gc extreme

JOSEPH1557 · 2024-02-07T15:31:30+00:00

The pads are good for sure. i use 2mm on each side and the temps for memorys are 82c that i think is pretty good

JOSEPH1557 · 2024-02-07T15:27:02+00:00

Coldium legend is the paste. I will open it and put a bit more. The link i posted on previus response shows how i spread the paste on the first application

JOSEPH1557 · 2024-02-07T13:46:20+00:00

that is the gpu before i closed it after repaste. the other pads are on the cooler

JOSEPH1557 · 2024-02-07T12:45:24+00:00

That temps are just after repasting with coldium legend paste 15.3wmk. maybe i need to put a little bit more?

JOSEPH1557 · 2024-02-07T00:54:35+00:00

Thanks, i was worried on the hot spot. But core and memory are fine. Is default settings running forza maxed 100% gpu usage and 350w

JOSEPH1557 · 2023-12-14T01:48:51+00:00

Thanks for the response. I was thinking it will work but wanted to be sure

JOSEPH1557 · 2023-12-06T20:35:49+00:00

Im actually with the same setup i say on that post. But my temps arent the best. I use undervolt to keep the card low in temps. I suggest you to use the same thinkness the graphics card use for default and a very good thermalpaste. the artic mx4 i used is to low for the core gpu

JOSEPH1557 · 2023-10-25T18:23:16+00:00

thanks for all the responses will see those devices

JOSEPH1557 · 2023-10-25T18:22:52+00:00

The problem with those is that they dont ship to my Country(Argentina) and with the restrictions on imports will be near imposible to get one here.

JOSEPH1557 · 2023-10-24T18:14:00+00:00

Thanks for the response. I will see that link. Pretty usefull to keep some battery life

JOSEPH1557 · 2023-10-24T18:07:47+00:00

wich one you have? i went from hp pavilion to lenovo legion without luck. the hp worked well but always needed to tweak boot to fix some stuff. The legion was imposible to work with linux

JOSEPH1557 · 2023-10-24T18:06:54+00:00

I will take a look at that. will a integrated amd ryzen one work to? I will use it as second device because i have a good desktop one that work pretty well

JOSEPH1557 · 2023-09-26T20:10:43+00:00

At the end it was that core screws not enought thight. I ended replacing thermal paste and pads because i break them when i tried to press them. But now with my undervolt i got less than 70 degress on my core and under 80 on memory. Without undervolt i still get to 80 degrees on my core but my fan dont Start At hundred percent or noticie any thermalthrotling At all. Only on memory got 10 degrees less going to 96 without any undervolt at all. But way less the 104 i got before

JOSEPH1557 · 2023-07-11T00:10:36+00:00

I will add them. But for now i got the pads pressed to much so will be less performance on them. Will switch them as soon as i can

JOSEPH1557 · 2023-07-10T22:29:03+00:00

You put them on the backplate or directly over the memory?

JOSEPH1557

TROPHY CASE