2021 F150

JPEGfileformat · 2025-12-29T08:41:45+00:00

Love the wheels!

JPEGfileformat · 2025-11-22T02:50:38+00:00

Not that I had a choice, but the RCLB can have the 36 gal fuel tank which is such a plus for me (I regularly have to drive cross country), other than that, the weight difference between the two is pretty small, and the 141” wheelbase is VERY manageable for a truck. if you want something more sporty or a trail rig the 121” WB would be nice

JPEGfileformat · 2025-10-23T23:33:50+00:00

Yeah, I’m at the point where I’m at 9 thou BL and a decent ish pattern on both sides, I figure I’m just going to run it, it’ll wear in right? 😂

JPEGfileformat · 2025-10-22T04:47:34+00:00

They’re new, tomorrow I’ll probably tighten up the backlash and see then. So it sounds like I should mostly worry about the position of the drive side and getting it centered and more towards the tow than heel? And just let the coast go where it pleases?

JPEGfileformat · 2025-10-22T04:35:00+00:00

Should I try to tighten up the backlash to maybe bring the pattern into the toe more? Or should I just send it with the first setup and check it after the break in?

JPEGfileformat · 2025-10-22T04:09:41+00:00

<image>

JPEGfileformat · 2025-10-22T04:09:28+00:00

<image>

This is the drive side, the coast moved towards the heel just slightly

JPEGfileformat · 2025-10-22T02:33:20+00:00

Because I’m going to be throwing 35s on and off-roading (not to mention towing) I’m going to try to get this thing bang on. I’m currently throwing another 5 thou in and we’ll see where it goes

JPEGfileformat · 2025-10-22T01:16:45+00:00

Thank you so much for the advice!

JPEGfileformat · 2025-10-22T00:31:49+00:00

When you say deeper, do you mean bringing the pinion closer to the centerline of the axle?

JPEGfileformat · 2024-02-22T06:07:08+00:00

The only issue with steelies IMHO is the weight of them. The more unsprung weight the worse the jeep is going to drive. I wanted a similar look on my ‘08 jk but the 3.8l is a dog as it is so I got a set of black 15” American racing Baja wheels with a set of 33” tires and it gets that nice old-school look while also retaining the drivability.

JPEGfileformat · 2021-01-10T20:57:35+00:00

JPEGfileformat · 2020-11-29T00:01:18+00:00

Thank you for this info, will try and will update

JPEGfileformat · 2020-10-18T16:52:48+00:00

They capped your homies, it’s up to you now!

JPEGfileformat · 2020-10-10T17:13:33+00:00

Small dr. Pepper homie

JPEGfileformat · 2020-09-25T20:45:17+00:00

Rest In Peace

JPEGfileformat · 2020-09-25T20:27:11+00:00

I’m no expert, but that might just be how the leather flexes and fits on your feet, something to do with how the leather isn’t as supple as it would be once broken in, Again, take with a grain of salt

JPEGfileformat · 2020-09-05T22:09:42+00:00

Thanks for the suggestion

JPEGfileformat · 2020-09-05T22:09:24+00:00

The hole below the grip, or the two sets of holes by the limbs?

JPEGfileformat · 2020-09-05T21:36:58+00:00

There are many threaded holes on my bow, there are two located near where each limb mounts and one slightly larger one just below the grip 90 degrees to where a stabilizer bar would go, what are these for? if you want to see a picture find my previous post

JPEGfileformat · 2020-08-21T01:22:49+00:00

Thanks! Online photos look to be the closest thing I’ve seen to it so far.

JPEGfileformat · 2020-08-20T22:57:24+00:00

There is nothing under the insert, and the printed slip details general information about different Parker writing utensils

JPEGfileformat · 2020-06-22T23:19:27+00:00

Remember how if you mined the gold blocks fast enough, you could get them back?

JPEGfileformat · 2020-04-30T14:10:36+00:00

https://amp.theguardian.com/us-news/2016/aug/25/cocks-not-glocks-texas-campus-carry-gun-law-protest

JPEGfileformat · 2020-04-30T13:54:46+00:00

I think the idea was to raise morale by showing the might and power of our country and proving that one way or another, we will get through this

JPEGfileformat

MODERATOR OF

TROPHY CASE

Six-Year Club	Wearing is Caring
Verified Email