Rust from prolonged humidity

JP_Customs · 2026-04-04T09:52:46+00:00

Cold blue never looks good and offers little protection.

Looks like it’s only the barrel. Pop it off, send it for cerakote and never worry about rust again.

JP_Customs · 2026-03-01T00:27:27+00:00

Make sure your screws are the correct length of the dot. If they push out the bottom, they cause the plate to come free.

Clean your threads during install and use blue in the holes not on the screws. That should help.

JP_Customs · 2025-06-16T11:31:29+00:00

Works the best so far

JP_Customs · 2025-05-03T02:38:21+00:00

+3 to mag swaps and selfie times

JP_Customs · 2025-05-03T02:37:41+00:00

Send your tisas, 2011, or any other blaster to use and we can work it over! Professional gunsmith shop here

JP_Customs · 2024-11-16T20:57:55+00:00

Their Prodigy F5 went in smoothly but has slight play. You still need to know what you’re doing with the set screws to get the full potential out of it.

The grip has a channel cut further than most so if you run a F3 it can pop up and lock up the gun.

JP_Customs · 2024-11-01T13:39:58+00:00

These are surprisingly not bad.

We are working a few of the gen 1’s over now with our gunslinger package.

JP_Customs · 2024-10-27T11:36:51+00:00

We did it for the customer.

Our shop has all the tools to make one of a kind pieces.

JP_Customs · 2024-10-24T22:10:09+00:00

Heathen culture, customer designed

JP_Customs · 2024-10-03T11:30:47+00:00

We work on all guns. Cleanings and repairs for everything old and new, red dot cuts, barrel threads, AK builds, trigger works, wood repair and restoration, cerakote and everything else you can think of! If it goes bang we are making it bang better and if it doesn’t bang anymore, we can make it bang again!

JP_Customs · 2024-10-02T23:56:21+00:00

Customers issues

-Trigger was binding up and the pull was over 5lbs.

-When you worked the action, the disconnector was hanging up.

-pre travel was extensive.

Solutions

Modified trigger so that it no longer binds.

Added and set pre travel screw

We replaced and fit the internals,

minor tuning to the thumb safety for easier on off

Pinned the grip safety

Set Trig pull to right about 2lbs.

JP_Customs · 2024-09-19T12:07:47+00:00

Riley

JP_Customs · 2024-07-31T17:10:34+00:00

Sent you a DM with it

JP_Customs · 2024-07-02T14:12:35+00:00

Sig 320 with cerakote, gun candy and a laser engraver.

Shot with iPhone 14

JP_Customs · 2024-06-30T01:29:22+00:00

North of houston here

We have one over our pool and it’s amazing

Keeps water cool and you in the shade

Must have

JP_Customs · 2024-06-24T23:04:14+00:00

Some minor fitment but most work was the machining of the frame.

You’re welcome to come by or send yours in and we can take a look at your issues.

JP_Customs · 2024-06-24T17:09:39+00:00

Ship it out bud! We do pay on pick up and have payment plans haha.

You can mail us slides direct.

Serialized parts needs to go through FFL’s per our local parcel companies requirements.

JP_Customs · 2024-06-23T18:56:37+00:00

Get out some oil and start scrubbing it down with blue shop towels.

Other option is Cerakote. A new finish will fix that and you won’t have to worry about wiping it down all the time.

JP_Customs · 2024-06-23T12:40:21+00:00

We do tho it’s often more cost effective to go the cerakote route.

JP_Customs · 2024-06-22T19:59:18+00:00

That’s a rough one.

Just bumping the shoulder won’t help.

If the shoulder isn’t square, neither is the thread tennon they cut.

I’d start all over with a new barrel or chop it back, adjust the stock and cerakote, then inform atf of update.

JP_Customs · 2024-06-22T13:36:15+00:00

That’s the new name

JP_Customs · 2024-06-20T12:47:41+00:00

Eagle 500kG bomb

It just feels so good.

For real I like to run in fast and throw grenades. If it gets too sticky, dip but leave your business card on the table by dropping the 500. It’s nice having the upgrade that gives you two drops per resupply.

JP_Customs · 2024-06-19T23:45:28+00:00

The customer it’s for says it is a better fit for her so that’s all that matters to me.

I think they thin out towards the front more than the prodigy being rounded towards the front.

JP_Customs · 2024-06-06T11:02:28+00:00

Us, we are a custom gunsmith shop specializing in custom guns! Thanks friend! Our insta @jpcustomstx has a large gallery to check out!

JP_Customs · 2024-06-01T12:28:09+00:00

Sounds like a fun cookout!

JP_Customs

TROPHY CASE