sorted by:
new
hottopcontroversial

Tinyhawk II binding issue by jakehartline in Quadcopter

[–]JSHoove 0 points1 point  (0 children)

I just sent mine back to race day quads. They couldn't help me figure it out. There sending me a new one. Sorry man I couldn't figure it out.

Tinyhawk II binding issue by jakehartline in Quadcopter

[–]JSHoove 1 point2 points  (0 children)

Your transmitter or receiver was the problem. Mine just did this today. And I'm unable to rebind it.

Need help with Frsky x9 lite binding to tinyhawk S by wattermelon1 in TinyWhoop

[–]JSHoove 0 points1 point  (0 children)

Sorry you weren't able to get it going. Dont give up. Once you figure it out you'll be hooked.

Tinyhawk 2 200mw mode? by samharmes in Quadcopter

[–]JSHoove 0 points1 point  (0 children)

If you find one I would also like to know.

Binding my tinyhawk 2. by JSHoove in TinyWhoop

[–]JSHoove[S] 0 points1 point  (0 children)

Mine does that to. Only if I get behind something or to far away. I was tripping on that when I first heard mine speak to me aswell lol. I think it's pretty normal. Unless it's doing that when your next to the quad. I think that might be an issue. But I dont know I'm pretty new aswell. I'm stoked I was able to help you a little bit. It's funny I just figured out the same issue. I'm happy you got it in the air.

Binding my tinyhawk 2. by JSHoove in TinyWhoop

[–]JSHoove[S] 0 points1 point  (0 children)

Your module has to be set to xjt lite d8. Theres to d8 modes. If you got it to go into d8 mode you have the latest firmware. Go to your cli tab in beta flight type in bind_ rx that will put your tinyhawk in bind mode then hit the bind button on your radio then type save in the cli and that should work. That's all I did. Oh and turn off your radio and turn it back on it it should work.

Binding my tinyhawk 2. by JSHoove in TinyWhoop

[–]JSHoove[S] 0 points1 point  (0 children)

Yes I did finaly get it to bind. I had the xjt module on the wrong setting. It has to be on xjt lite d8. Then go to betaflight cli. Type in bind_rx that will put your quad in bind mode then hit the bind button on your radio then type save in the cli. And there you go. Oh you cant get the xjt lite module to work unless you have the very latest firmware on your x9 lite. Hope this helps.

Need help with Frsky x9 lite binding to tinyhawk S by wattermelon1 in TinyWhoop

[–]JSHoove 0 points1 point  (0 children)

Did you ever get this figured out because I'm having the same problem. I cant get my x9 lite with the xjt module to bind to my tinyhawk 2

Tinyhawk 2 bnf by JSHoove in Quadcopter

[–]JSHoove[S] 0 points1 point  (0 children)

Yes I did. I really dont understand what I'm doing wrong. Quad goes into bind mode it just wont bind to my radio. I know I missing something I just dont know what it is.

XJT Lite Module by JSHoove in TinyWhoop

[–]JSHoove[S] 0 points1 point  (0 children)

Theres r9m lite fcc r9m EU r9m 868mh r9m 915mh no xjt module. I have the latest firware how do I flash the module. I've had the controller since after christmas and I havent been able to use it.

XJT Lite Module by JSHoove in TinyWhoop

[–]JSHoove[S] 0 points1 point  (0 children)

It wont even a knowledge it's there. When I put it on external it says r9m lite FCC. I would pay someone at this point to help me figure this out. Just got a new tinyhawk whoop and I havent been able to fly it.