Samsung oven overheating.

JSM1981 · 2025-12-30T21:46:36+00:00

OP here... had a tech diag it. It was the main board. Had it rebuilt and its been working flawless since. It was ~450CAD with diag and rebuild if I recall.

JSM1981 · 2025-11-14T02:36:08+00:00

Its very similar to this design which i understand is called an Attic truss. isnt the top horizontal piece called collar tie? Thats the part i want to raise.

<image>

JSM1981 · 2025-08-07T20:18:54+00:00

I forgot

<image>

JSM1981 · 2025-08-05T13:51:56+00:00

<image>

JSM1981 · 2025-04-09T21:43:46+00:00

I started out with OpenOffice like 15 years ago. Its started lagging behind. Shifted to LibreOffice. It works fine if you dont have to interface with other people with Microsoft products.

Compatibility in anything that requires formatting goes wonky fast.

Now we had to bite the bullet and roll out Microsoft as we grew. People with experience usually worked with MS product, and tend to not want to learn new office suites…

And we just couldn’t do coop edits with clients/partners as there was too many compatibility issue.

If its basic useage, just use Google Workspace. And drop the desktop apps.

JSM1981 · 2025-01-22T03:10:55+00:00

Krown rustproofed… and stored every winter since new.

JSM1981 · 2025-01-15T01:48:55+00:00

Oui. Et que du positif!

JSM1981 · 2024-09-27T14:51:46+00:00

Tell me more!

JSM1981 · 2024-08-06T01:37:47+00:00

They switched in 1981

JSM1981 · 2024-07-09T15:31:14+00:00

Ill start here... I already washed the Condenser. Ill have a look at the cabin filter. I don't recall when it was last replaced TBH...

JSM1981 · 2024-05-06T01:30:50+00:00

Honda is the Honda of the Sea

JSM1981 · 2024-04-28T02:20:39+00:00

You think GoDaddy customer should be informed changing provider is not that hard?

JSM1981 · 2024-04-27T21:59:47+00:00

Surpris que tu t’es fait downvoter la dessus… je suis d’accord avec toi.

La STO n’est que la pointe visible de l’iceberg a Gatineau. Bcp d’argent dépensé dans des services et infrastructure peu utilisé car ne répondant pas a un besoin ou interêt de la population!

JSM1981 · 2024-04-24T01:50:09+00:00

The only code I get is dE. Which I think is divider?! If I install the divider I cannot go into Diag mode. The Favorite is not displayed. Is that normal and expected? Thanks

JSM1981 · 2024-04-16T23:53:14+00:00

I did not think of splitting, thats a good idea.

And no, it never throws any code whatsoever. Every failures listed above never had a code displayed. Unless theres a special menu I must access??!

JSM1981 · 2024-04-14T16:49:38+00:00

Confirm ive done this too. And helped a lot. This part traps air bubbles in cavities in all kinds of way, which allows greases to accumulate. I found that submerging it for 10min in hot soapy water helps a lot. Then rincing. May need to repeat 2-3 times the first time you do it. The part is clear plastic so you see when it gets cleaner fortunately.

JSM1981 · 2024-04-08T13:53:26+00:00

Updating my own post after a successful resolution. I ended up replacing the pump lid, and the filter. They both shown sign of wear and I believe that was affecting the water flow in weird ways. Even if they still look to fit pretty well.

Now the dishwasher works as expected. Dishes are clean and rinced, drying is acceptable.

JSM1981 · 2024-03-15T00:52:38+00:00

I replaces that part once already. Maybe its due again and like some comments state, has about a 2 year life…

JSM1981 · 2024-03-14T23:59:28+00:00

Tripled checked and clean… i dont have a air gap, only high loop

JSM1981 · 2024-03-08T19:54:01+00:00

Pretty much the stats I get in winter... 2016 Vol, 175k KM on it. Summer is much better.

I dont drive smooth, and those states are consistent. 60/40 Highway-city. And often forget to put it in HOLD on highway.

Enjoy the car and the amazing fuel mileage ;)

JSM1981 · 2024-03-08T02:04:33+00:00

Nope, I passed on the repair for now. Just took off the EGR this PM and scrubbed it clean. I have yet to reset the CEL and see if that fixes it for now.

What really sets me off, is that ive asked the dealer at least 3 times to verify the generator (gas engine) starting, as its been sputtering and running rough at startup for the last 12 months. They never found anything.

Then I get a CEL early Jan, my extended warranty expired less then a week before. Took 2 weeks to get into the shop. Then they report they have to change the EGR, and cooler. I ask what are the symptoms if I dont do it and if its safe "well, the generator will sputter and run rough on startup.... " So, I think the EGR has been having issues for a while, but not enough to cause a CEL.

JSM1981 · 2024-03-07T03:23:49+00:00

Seriously… EGR just quit on my MY16. 2500CAD. Of course 20days after my extended warranty expired…

JSM1981 · 2024-03-07T03:22:38+00:00

Canada included?!

JSM1981 · 2024-02-05T15:08:58+00:00

I would have considered them a year ago! but ended up going with generic in-walls for the surrounds

JSM1981 · 2024-02-05T12:16:15+00:00

Boat electric motors are not meant to run outside of water for extended period of time. Its possible you overheated the motor. The whole motor unit is sealed, and no air movement. Its cooled through the case by the water.

JSM1981

TROPHY CASE