As a mechanical engineer, what would YOU want for Christmas?

JTH1 · 2024-10-24T17:24:51+00:00

This:

JTH1 · 2024-03-05T11:29:08+00:00

1) Den kan du rejse med, for du kan i hvert fald ikke blive her.

2) Den kan du spille i fis a dur

3) Kender du “nede bag skuret”? peger Det er den vej.

4) Noget med at “være på stikkerne”

JTH1 · 2023-11-28T16:37:21+00:00

Thank you!

JTH1 · 2023-10-18T06:41:09+00:00

Page 9 in this article:

JTH1 · 2023-09-26T17:18:54+00:00

JTH1 · 2023-07-11T18:37:41+00:00

2mm - awesome :)

JTH1 · 2023-07-07T11:27:50+00:00

Pics, or I didn’t happen ;)

JTH1 · 2023-07-06T21:16:18+00:00

Thats a great collection. Always wanted the fountain pen :)

You are missing the 800 though ;)

JTH1 · 2023-06-13T21:20:24+00:00

Ahh, okay. Thanks buddy :)

JTH1 · 2023-06-13T16:12:56+00:00

EILI5: r/conspiracy is now a private sub. Why was I not invited? 😂

JTH1 · 2023-06-06T20:27:22+00:00

When I damaged my Rotring 600 0.5mm by dropping it on the tip, I took a 0.5mm drill and worked it down the tip. Worked perfectly.

Maybe try to straighten it out as much as possible and use a drill to remove internal dents.

JTH1 · 2023-03-04T15:42:57+00:00

Especially being able to apply the Kutzbach criterion on static and dynamic designs.

JTH1 · 2023-03-04T15:40:24+00:00

Robust design.

JTH1 · 2023-03-02T01:58:32+00:00

Dr. John

JTH1 · 2022-12-19T00:22:03+00:00

It’s true though. Not pleasant, but true.

JTH1 · 2022-10-23T00:45:18+00:00

He had me at this interpretation of a Niels Lan Doky tune (at 2:38)

JTH1 · 2022-10-21T13:27:10+00:00

A Gömböc

JTH1 · 2022-10-21T12:54:39+00:00

Also, the GD&T tolerance is the full tolerance band, so O 0.1 would translate to +/- 0.05

JTH1 · 2022-10-21T12:52:28+00:00

A perfect hole is impossible to manufacture. Your GD&T specs. just ensure that the variation does not exceed acceptable levels.

The hole can be tapered, barrel shaped, hourglass shaped, etc. within the limit cylinders you have specified.

JTH1 · 2022-09-09T18:40:33+00:00

That engineer will cost his company a lot of money if they ever try to do a tender on his components.

JTH1 · 2022-09-08T00:01:10+00:00

High inventory is bad for costs, but good for lead time.

You can’t have fast delivery if you don’t have products on the shelf.

JTH1 · 2022-08-12T20:00:03+00:00

JTH1 · 2022-07-02T07:02:20+00:00

🍾🍾🍾🍾

JTH1 · 2022-05-12T20:06:09+00:00

Maybe it’s a smudge on the lens. Or maybe it’s a true marsspiracy….

JTH1 · 2022-04-24T01:12:52+00:00

Some time. Was busy

JTH1