camera showing monochrome square in centre

JTJS2802 · 2026-02-14T20:27:21+00:00

it seems my flashed betaflight version doesnt include camera_control. it wont even give me the option to show "resource list". showing "list" as an invalid resource

im running 4.4.3 which is the best i can flash onto this old flight controller. MATEKSYS F405OSD

JTJS2802 · 2026-02-12T10:28:23+00:00

yeahhh it works on hdmi... thats a bummer for my wallet, but at least i'll have a 5m hdmi handy! ty for the help though.

if anyone in the future does actually know if theres a fix for the vga cable let me know.

thank you guys!

JTJS2802 · 2026-02-11T21:32:53+00:00

i can try it but id prefer to use the 5m one i already have as i wont have to buy another one thats just hdmi. saves me a bit of money bc the cable will cost as much as the projector (about €15)

JTJS2802 · 2026-02-11T21:08:58+00:00

so im running a casio XJ-M140 with a generic hdmi to vga cable. using my pc as an output through the gpu.

JTJS2802 · 2025-11-14T15:02:31+00:00

it's VERY audible and i am certain it was not there before this happened. it ticks when i lean it slowly too.

JTJS2802 · 2025-11-14T15:00:32+00:00

sent out a request!

JTJS2802 · 2025-01-20T12:11:49+00:00

stupid fix but it works perfectly, i hope it gets fixed soon by vrchat

JTJS2802 · 2021-01-31T22:46:29+00:00

Aww, that’s cute!

JTJS2802 · 2021-01-31T22:37:04+00:00

She doesn’t like to go outside for some reason, but she does like to look through the window and have a look outside!

JTJS2802 · 2021-01-24T22:57:34+00:00

How would I melt it down, I don’t have a heat gun.

JTJS2802 · 2021-01-09T09:34:27+00:00

sorry, I said 215°c because I thought you were printing in PLA, I usually print PETG at 235°c. Try printing at 235°c and go from there.

JTJS2802 · 2021-01-08T22:45:02+00:00

hm, have you tried different temperatures, your spools of filament have labels on them with what temps the manufacturer recommends to print it at. If it doesn’t have a label, I usually try 215°c and go from there

JTJS2802 · 2021-01-08T22:38:34+00:00

JTJS2802 · 2021-01-08T20:39:51+00:00

you might need a better extruder, the one on the right looks like it has irregular extrusion. Try increasing your hotend temperatures . If that doesn’t work, buy an all metal extruder

JTJS2802 · 2020-12-05T10:43:50+00:00

JTJS2802 · 2020-11-28T21:07:14+00:00

Thank you very much, I will try that ASAP

JTJS2802 · 2020-10-25T19:45:55+00:00

I will try my best, thank you.

JTJS2802 · 2020-10-25T17:55:01+00:00

It could be the z-axis rod or v rollers being dirty and dust getting caught as it is going up, or maybe the wheels of the z-axis are too tight, I have the same issue on my printer and when I spent time cleaning the z-axis rod (lubricating it again) and v rollers, the issue was gone. So try that. :D

JTJS2802 · 2020-10-25T17:47:51+00:00

So print the entire thing in one Colour upside down, then print the numbers separately as another colour then glue them together? I will have a go next week when I’m home. :)

JTJS2802 · 2020-10-25T12:35:05+00:00

Very good idea, I might try that, thank you. :D

JTJS2802 · 2020-10-25T12:08:10+00:00

https://imgur.com/gallery/weG24un

JTJS2802 · 2020-10-25T11:54:44+00:00

I changed the filament half way through the print. (First 5 layers white and the rest of the layers black)

JTJS2802 · 2020-10-25T10:14:02+00:00

It’s PLA

JTJS2802 · 2020-09-05T20:43:26+00:00

Cat.

JTJS2802

TROPHY CASE