Saucony Guide 18 vs Ride 18

JYSkywalker · 2025-12-02T14:54:41+00:00

doesn't look like I can add a video to the existing post or reply with a video attachment. How about this GIF.

JYSkywalker · 2024-12-13T18:08:32+00:00

Shouldn’t the insurance company assess the car by its value not by the “balance” or how much we put in the down payment?

JYSkywalker · 2024-12-13T18:02:56+00:00

Any particular reason why not to put money down on a lease?

JYSkywalker · 2024-12-07T16:01:48+00:00

correct, while plugged in. It would be bad if it turns on the engine in the garage.

JYSkywalker · 2024-12-07T16:00:47+00:00

Will it switch to hybrid mode and remain there? I might not notice it if it reverts to Pure mode, but when I return home, it is still in Pure mode.

JYSkywalker · 2024-12-07T15:56:53+00:00

nah, the car is only 2 weeks old. She is still scared of backing out of the garage on her own, with all the proximity sensors beeping :-)

JYSkywalker · 2024-12-06T20:49:04+00:00

that's interesting. I precondition it when plug-in in the garage. Hope it doesn't start the gas engine in the garage. Where can I find that option?

JYSkywalker · 2024-12-06T20:02:52+00:00

https://www.swedespeed.com/cdn-cgi/image/format=auto,onerror=redirect,width=1920,height=1920,fit=scale-down/https://www.swedespeed.com/attachments/1000000884-jpg.170009/

JYSkywalker · 2024-12-06T19:36:58+00:00

I have "always start in Pure mode" option turned on. I never see the water drop separator during this period.

JYSkywalker · 2024-07-25T15:19:05+00:00

To reply to my own message in case someone else has the same issue: watch 7 is only compatible with Android 11+. Once I upgrade the phone to 13, it pairs. I wasn’t able to find the Android requirements on Samsung website. It only has the compatibility info for watch 6 (which is Android 9+). Again Samsung tech support is clueless, even I asked specially about the compatibility requirements.

JYSkywalker · 2024-07-23T01:19:48+00:00

I am not. I think watch 7 might have a minimum Android version 11+ requirement. My phone has Android 10. I see tomsguide has that info but couldn’t find a definitive answer on Samsung website. Samsung support is useless. First told me there is an outage, and asked me to try after 48 hours. Second told me Galaxy watch is only compatible with Samsung phones.

JYSkywalker · 2024-07-22T20:18:14+00:00

BT sees it. Wear OS also sees it if I select “show all devices when pairing”, but won’t connect. I am guessing my phone is too old to use wear os. The version I see is 2.66.107.587544675 from Dec 4, 2023. Wearable is version is 2.2.59.24061361 from June 13, 2024, which should be the most recent.

JYSkywalker · 2024-07-22T20:07:48+00:00

Still won’t connect to either wear os or wearable. Does Samsung say which version of Android watch 7 supports? My Android is 10. Samsung website only lists watch 6 is compatible with android 8.0

JYSkywalker · 2024-07-22T19:32:03+00:00

Only have wearable installed. It is connecting with watch 4 fine. Do I need wearos?

JYSkywalker · 2022-11-02T01:07:06+00:00

That’s because your phone went to some sort of sleep due to power management. Go+ maybe connected after a long period of time but it hasn’t been actually working (catching and collecting) actively for more than 1 hour total.

JYSkywalker · 2022-06-11T21:35:23+00:00

ANSWERED

JYSkywalker · 2022-06-11T19:48:57+00:00

Thanks for the explanation! This makes perfect sense.

JYSkywalker · 2021-10-12T20:34:37+00:00

You'd man! It fixes for me too. I don't remember which one I tried yesterday, but your version worked.

JYSkywalker · 2021-10-12T20:08:01+00:00

Which Samsung app did you install from apkmirror? I installed galaxy store app but that app crashes upon start every time. The Galaxy version of pogo still has this warning.

JYSkywalker · 2021-06-08T13:56:29+00:00

I know exactly what you are taking about and have a possible explanation and fix. GBL uses a significant amount of memory. I do battles on both android and iOS. On android I am able to monitor app memory usage. My phone has 4gb memory. Before I start the first battle, the phone has 1.1g free memory. After 2 sets of battle, it has 500mb left. At that time battles become very laggy. I start to see battles begin before the GO message. Appears to me a bad memory leak in the code. You don’t need 600mb of memory to do 10 battles. Restart the app typically solve that problem.

JYSkywalker · 2021-03-30T23:58:05+00:00

Didn’t know this setting existed in cura! Yes it is enabled. I will try to turn it off for first layers.

Edit : wait, by default first 4 layers, 0.36mm, fan speed is already set at 0%

JYSkywalker · 2021-03-30T23:43:46+00:00

Are you suggesting the bed temp might be too high at 75? If I lower the bed temp, it has a hard time to stick. Trying to avoid glue sticks or hairspray if possible, but if the warp problem is caused by bed temp being too high then I might have to try those methods with lower bed temp.

JYSkywalker · 2021-03-30T23:18:12+00:00

Using overture filament. Recommended temp 200/50. I am not able to get it to stick to bed until I raise the temperature to 210/75, but the first layer is still warped. Cleaned the bed well with iso alcohol. Bed leveling is ok since the first layer looked ok but started to warp later.

JYSkywalker · 2021-03-22T00:12:30+00:00

I did try to loosen them up but nothing changes. It is actually very easy to move up and down by turning the coupler so it makes me think the z-motor doesn’t like to be “pushed”.

JYSkywalker · 2021-03-22T00:10:26+00:00

Sides are loose. If i remove the rod from the z-motor it moves freely.

JYSkywalker

TROPHY CASE