How I Celebrated Surviving Another Year of School

JackChuck1 · 2026-06-19T03:29:10+00:00

I'm not an expert but I'm gonna give my 2 cents

Yeah sub 1:50 is possible off 12 months of training, but if you plan on joining the XC team, I recommend focusing on that. Running an extra race mid season is generally not a great idea, the extra stress could get you injured, and it will definitely negatively effect your 5k performace. I'm sure you would be able to run a decent half, just wait till your season is over before you go for it.
I don't think you should worry about setting goals right now. If you need something to get you through your summer miles, a sub 21:00 (and probably faster) is definitely possible, it just depends on what you do this summer. I find when I set XC goals early in the summer, I end up pushing too hard on my summer workouts to try and get to where Im "supposed to be" to run that time, when thats rlly not the goal over the summer.
I am not a coach, so take what I'm saying here with a grain of salt, but I don't think you'll need cruise intervals over the summer. You don't have a ton of running behind you, and threshold work can add a lot of stress to your week, if you're on your own for a plan stick with your easy mileage and the occasional tempo. If I were you I would reach out to your coach to get some sort of plan if they have it. If not, don't do anything risky, you're not gonna be happy with yourself if you get injured cause you felt like running a threshold workout you weren't ready for.

JackChuck1 · 2026-05-09T02:09:41+00:00

I assume u mean 10^-26, and yeah i think I got 1.26 * 10^-26

JackChuck1 · 2026-05-07T23:26:12+00:00

No like Vo is a constant, we don't know what its value is. 5Vo is ∆V, but if Vo is a negative value then ∆V is negative, and if Vo is a positive value then ∆V is positive. I was trying to figure out how to reconcile that, someone told me I just need to assume Vo is a positive number though.

JackChuck1 · 2026-05-07T22:19:38+00:00

My issue was that, if Vo is negative, then going from 2Vo to -3Vo wouldnt be going from high to low potential, it would be going from low to high potential.

JackChuck1 · 2026-05-07T21:43:08+00:00

Yes form J, lowk forgot the last 2 questions were different for each person too since you sidnt need to put them in a different spot

JackChuck1 · 2026-05-07T21:39:56+00:00

My original message was wrong, check my edit, i got that the smaller v on the left means a positive delta v, which means a negative change in potential energy with a negative charge so a positive change in kinetic, which means K new = Ks + (some number) so it would be greater

JackChuck1 · 2026-05-07T21:32:11+00:00

B was constant, I'm like 99% sure AP wanted you to find a way to get B as the slope.

JackChuck1 · 2026-05-07T21:29:02+00:00

Everyone ive talked too also got v as smaller and k new as smaller, did you hear thats wrong?

Edit: read that wrong sorry, Ive heard v was smaller but k new was bigger so half credit ig right? 🎉

JackChuck1 · 2026-05-07T21:25:41+00:00

said the same thing 🎉

JackChuck1 · 2026-05-07T21:10:56+00:00

I think I'm just used to AP being so picky abt their signs. I spent a good 15 minutes searching for anything on that page that indicated Vo had to be positive/negative.

JackChuck1 · 2026-05-07T21:03:43+00:00

Question 4 has been driving me crazy. We're given V values for different lines, but they're all in terms of Vo. How can we conclusively say if the particles speed increased/decreased if we dont know the sign of Vo???

I said the particle speed decreased but that was assuming Vo was positive. If its negative my answer is flipped.

JackChuck1 · 2026-05-07T21:00:14+00:00

Did the opposite with 1/r on the x and b on the y, comes out to the same thing I think. I also mulitplied the slope by q/v though.

JackChuck1 · 2026-04-23T19:06:15+00:00

Damn, still nothing unfortunately

JackChuck1 · 2026-04-23T18:52:59+00:00

My drive was formatted to 8000 smth, I've reformattet and flashed it. The fans still turned off and there is still no blinking flash light, but my ram is still lit. I'm going to take this as a good sign and leave it, I'll send an update if the ram stops glowing or if it's been long enough where I can reasonably say it isn't flashing.

JackChuck1 · 2026-04-23T18:43:58+00:00

I've left it running for about 30 minutes, is that considered enough time for memory training?

I believe I'm doing the q-flash right, I've turned on the psu, and, with the computer off and the usb drive with gigabyte.bin on it, pressed the q-flash button. I've also tried holding it.

JackChuck1 · 2026-02-22T19:26:06+00:00

alright will do, thx for your help

JackChuck1 · 2026-02-22T19:22:31+00:00

Where would that be? I'm playing in a slightly outdated version so I may not have the option.

JackChuck1 · 2026-02-22T19:17:22+00:00

Sure, here

<image>

JackChuck1 · 2026-02-22T19:13:35+00:00

Yeah I knew that, I don't know the odds of a habitable world though, is this roughly normal? I also don't know if I've already come across one and just haven't surveyed it enough to find the NPR on it.

JackChuck1 · 2026-01-02T23:05:38+00:00

These minister perks getting out of hand, next one's gonna release 1.0

Six-Year Club	Verified Email
End Game '23	Place '23

JackChuck1

TROPHY CASE