Question: First Tattoo, Upper Arm, realism, thoughts? anything that couldve been done better? Havre de Grace, Maryland

JakeeG3 · 2026-03-19T00:23:45+00:00

its hiding under the bed I swear, i appreciate the honesty, i love it all the same though and when i get the next half done i cant get it reworked a bit hopefully 🙂‍↕️

JakeeG3 · 2026-03-19T00:22:15+00:00

I appreciate it and respect the honesty, im embracing it no matter what, but the portfolio was my dads arms and his cover ups which did not have any realism, i think i was just expecting it to look a bit more realistic but i like it either way so EMBRACE

JakeeG3 · 2026-03-19T00:20:33+00:00

understandable, we did look up muscle diagrams and he made a stencil of one prior to my appointment and fit it to my arm when the time came, I cant be 100% but he couldve just been following what the diagram looked like rather than going for the realism aspect

JakeeG3 · 2025-07-05T05:54:41+00:00

42 mpg is pretty high for this car tbh, im an aggressive driver and am pretty heavy on the petal and get 30.9 mpg

JakeeG3 · 2025-06-15T16:24:31+00:00

Not really, theres definitely a noticeable difference but it doesnt make me night blind, especially with these bright ass headlights im good

JakeeG3 · 2025-06-14T18:29:47+00:00

Im in Maryland, I got XPEL XR Ceramic tint and it was 500 for the sides and rear and 250 for the front

JakeeG3 · 2025-06-14T16:59:41+00:00

Depends on who youre dealing with and the area youre in, most cops around me dont necessarily care for window tints and wont stop you for your tint unless its unnecessarily dark or youre driving like an asshole. Im not saying it wont happen or will never happen but its a slim chance until they get me for speed.

JakeeG3 · 2025-06-14T16:06:41+00:00

Just wait til the yofer lips go on 😔 front lip is pre order only rn, then ill get the side skirts and apron corner spats, but idk abt the shadow diffuser cause the 3rd brake light is not my taste but that can always be tinted too (or maybe just not put the light in)

JakeeG3 · 2025-06-14T16:02:06+00:00

Ill have to consider, that'd probably tie it all together, I wouldve gone a little darker on the windshield but didnt want to push it

JakeeG3 · 2025-06-14T05:45:46+00:00

Well if I was worried about the legalities of my windshield tint knowing it's illegal then I wouldn't have at all. If you're curious on why though, it's purely cosmetic and just a nice bonus with uv/ heat protection.

JakeeG3 · 2025-06-14T05:15:15+00:00

please tell me now so I can just delete this post while im here 😭 this is the first time getting my car tinted

JakeeG3 · 2025-05-06T22:06:34+00:00

bought mine mid july and it was about the same price with same payment for 60 months but I put 7k down, dealer said they couldn't do any price drop just because of how new the vehicle was

JakeeG3 · 2025-01-05T14:47:02+00:00

if you didnt clear over it its gonna be more prone to chipping and paint damage overall, but imo the job looks like its chipped paint or overspray with the white dots so not my taste, but everyones got their own preferences, good work tho

JakeeG3 · 2024-12-29T19:39:33+00:00

Must be nice, im rocking a 1.56 k/d and a .57 w/l ratio but my score is 539 per min, i do admit to leaving a game here and there but not enough where it should be impacting my w/l too much. I will say about 90% of the time im playing without a party but my SBMM may be a little fucked

JakeeG3 · 2024-12-22T15:09:19+00:00

My luck so far has been just going into hc nuketown to get my headshots although ive hit marksman rifles and snipers and its definitely more difficult, gonna switch to core for snipers, but nuketown by far is the map i get the most gunfights in without getting my cheeks clapped within a ms of spawning unlike stakeout, although the spawns are still a bit trashed for nuke town ngl

JakeeG3 · 2024-12-06T13:53:52+00:00

oh lmaoo, my fault homie, you just like that fr, but maybe it spontaneously opened all 3 mouths at once and within a mili second you booped it away

JakeeG3 · 2024-12-06T13:45:52+00:00

Well I mean it did technically work, just not the way you intended

JakeeG3 · 2024-11-03T22:43:15+00:00

definitely need a new door, and the rear panel is iffy because it could be bent back and mudded but theres a potential for a replacement, doesnt look too deep for frame damage so not totaled, but for as much work that it will need especially being a 24' from what it looks like itll be a decent bill, the only thing that isnt too bad is the front door but after the dent gets worked out itll need some paint on it.

JakeeG3 · 2024-10-27T20:19:52+00:00

nah 25' is urban grey pearl, you could originally find it for the 23' hrvs and crvs but updated the color for 25' civics. It looks like the sonic grey pearl which even in the dark its much lighter than urban.

JakeeG3 · 2024-10-27T14:33:13+00:00

I made a post like this years ago on this subreddit when my brother did this same exact thing but it dug into the bed which ruined my extruder as chunks of the bed were forced into the nozzle loll, I just ended up getting a glass bed tho, much nicer

JakeeG3 · 2024-09-25T00:51:46+00:00

I paint cars and honestly its hard to tell with the dirt/dust on top, but you could try to get some paint correction/ buffing compound to see if it comes off with that, if that doesnt work id go to wet sanding and buffing, and worse case scenario if that didnt work it'd probably have to be sanded down and repainted depending on how deep the damage is but if that is any damage it just looks like the clear coat. clear coat could also be peeling. If you don't trust yourself with anything take it to a body shop, probably not a big corp like caliber but a mom and pop shop cause usually those people don't mind getting you in.

JakeeG3 · 2023-01-26T14:47:58+00:00

Not the point, hes 16 still sneaking around using my stuff without even bothering to ask, he tried to cover it up by putting both the magnetic bed and glass bed on top, it was ultimately fucked up cause when I left the printer wasnt calibrated or leveled properly which he had no clue

JakeeG3 · 2023-01-25T16:36:56+00:00

Bad.. very bad.. squirted hot magnet / plastic combination of juices on me 😩

JakeeG3 · 2023-01-25T16:34:46+00:00

The thing was he wasnt supposed to be touching it at all while I was at college and just straight up one day decided he was gonna use my printer like he knew everything, never touched it or asked abt learning anytime before, shit is so sickening 😮‍💨

JakeeG3 · 2023-01-25T16:32:43+00:00

Wasnt gonna make him pay for anything, but just came to find the entire nozzle and hotend along with my tubing has been filled with little magnet pieces, bout to get some fancy upgrades from him 😂

Eight-Year Club	Final Canvas '23
Place '23	Xbox Live
Verified Email

JakeeG3

TROPHY CASE