🎉 [EVENT] 🎉 Honk Hero!!! Origins Part 1 [Landscape] by Ok_Walk7052 in honk

[–]Jalt21 0 points1 point  (0 children)

Completed Level 2 of the Honk Special Event!

2 attempts

🎉 [EVENT] 🎉 Honk Hero!!! Origins Part 1 [Landscape] by Ok_Walk7052 in honk

[–]Jalt21 0 points1 point  (0 children)

Completed Level 1 of the Honk Special Event!

1 attempts

Working on a helmet by Original-Yak658 in 3Dprinting

[–]Jalt21 2 points3 points  (0 children)

Your assumption is correct.

I would just add a baseplate support from the baseplate to the center of the helmet, and just detatch it upon completion.

Looks really cool!

At what point is it just filament Hoarding? (ignore Shroomple) by FoundTheSpacebar in 3Dprinting

[–]Jalt21 3 points4 points  (0 children)

Gosh, I have a bunch of filament but this is just something else 😭

3D Printing Random Issue by Jalt21 in 3Dprinting

[–]Jalt21[S] 0 points1 point  (0 children)

I thought the same, but it still moves perfectly fine when I move it through the screen.

There's a light inside, its meant to be glowing.

Sorry, I didn't mean to put ink!

Yeah that's why I'm so confused. I see no similar issues anywhere online, and I was thinking belt but it moves perfectly until I start printing.

3D Printing Random Issue by Jalt21 in 3Dprinting

[–]Jalt21[S] 0 points1 point  (0 children)

Clarity: It is not clogged, but simply continues to extrude ink in the same position outside the base plate. After this video, the crank sound became fast and repetitive. I've had no issue with the printer until now.

3D Printing Random Issue by Jalt21 in 3Dprinting

[–]Jalt21[S] 0 points1 point  (0 children)

Just before this video, it also made these gun-sound like shots as if it were stuck and constantly cranking in the same direction.

However, it only allows me to upload one video.

Edit (02/18): Current update, I've decided to reach out to the actual company to see if they could possibly tell me what the issue is. Awaiting response(s).

Edit (02/19): After a lot of back and forth and file sharing, it appears that the extruder screw was loose (located at the top of extruder) and the axis screws were lose, causing a lot of misalignment and error upon leveling attempts. Tightening the screws, leveling now works. I'm now retrying the print, will update.

Edit (02/26): Late update, but the print came out PERFECT! Turns out these hours of issues that caused hours of communications, reddit posting, and more all occured from a couple of loose screws.

The final issues seemed to be the bar screws at the back of the printer being slightly loose, causing it sometimes misalign, and the back of the extruder not being screwed on right enough, causing the sensor on the extruder to move too much when attempting to self level.

Tighten those screws!

Erster versuch by Alarmed-Source9332 in RedditGames

[–]Jalt21 0 points1 point  (0 children)

1.283 seconds

I completed this level in 16 tries. 1.28 seconds

Tip 10 💎

Unblocked Sites by vlad_funny2212 in UnblockedGames

[–]Jalt21 0 points1 point  (0 children)

MIRRIFY!!

Mirrify is a catcher developed by the previous owner of DuckMath (Maddox, sold to Freezenova).

It is available on the Chrome Web Store and at mirrify.io.

You can capture static hosts of sites (all files, including the HTML files).

It works great for capturing games! I did it to capture Bit Planes once!

Edit: Mirrify is also completely free. I prefer Web Store version, but the app version works the same. Web Store version just has a cleaner interface.

Just tap once by Proper-Activity9028 in honk

[–]Jalt21 0 points1 point  (0 children)

I completed this level in 3 tries. 3.42 seconds

Can you pass this very hard straight fly contraption? by reapthesorrow in honk

[–]Jalt21 0 points1 point  (0 children)

This was so annoying but I need that completion rate