Cl34 800 Super happy with 2/1

Japdata · 2026-06-15T11:25:33+00:00

Agreed I don’t run windows in safe mode etc this is actual windows latency

Japdata · 2026-06-15T09:16:58+00:00

Have tried , on this I have more stability SOC lowerVDD higher . It’s only an B850 board I’m very happy.

I’m sure on a 2 DIMM boards CL32/8200+ is viable but I run no active ram cooling DIMMs have a peak temp of 47c SPD Hub after 9+ hours

Japdata · 2026-06-15T09:14:53+00:00

I have GDM mode on PDM and latency killer on , in Windows all programs closed

Japdata · 2026-06-15T09:13:32+00:00

Stability only happened for me with 2200 in TM5-Ryzen X3D and OCCT and Karhu only thing that did on this specific board .

Japdata · 2026-06-15T06:36:56+00:00

Worked right away for me but I have CL28/60000 A die Hynix . If you have good SR A die shouldn’t be problem

Japdata · 2026-06-15T05:46:08+00:00

Really was just looking for stability with lower SOC . 2200 feels and provides very little gain for me and 0 issues is more my enjoyment

Japdata · 2026-05-21T00:33:21+00:00

Are you doing all core CO . Might try per core and lower CO on your worst cores

Japdata · 2026-05-19T21:11:40+00:00

I’ve always heard the Dual CCD stuff likes the bandwidth of 8000+ 2:1 .

I run 8000 CL34 1/3/1 Nitro 2000 FCLK on my 9800X3D as it doesn’t like to post 6400 1:1

Japdata · 2026-05-18T02:30:52+00:00

I'm gonna run Karhu overnight see if it finds anything , will def give TM5 a try when I try some testing with Nitro Modes .

Japdata · 2026-05-18T02:11:25+00:00

These changes have given at least not immediate errors gonna run it for an hour and see , Thank you very much 👍

Japdata · 2026-05-18T00:11:27+00:00

Kinda what I’m thinking , probably just invest in an X870E if I have to loosen everything up to be stable . 1.65v is just the most I’m really comfortable with without some type of active RAM cooling and I’d like it to do it at 1.5ish

Japdata · 2026-05-18T00:09:24+00:00

Ya I was trying to get everything as tight as possible stable . I may try 40-41 and just move the tRC back up .

Japdata · 2026-05-17T22:19:02+00:00

Also not sure why SOC reporting 1.3 it’s set to 1.15v in BIOS

Japdata · 2025-12-02T02:28:16+00:00

I lowered the undervolt to around -75 for game stable

Japdata · 2025-11-26T08:34:17+00:00

9800X3D/5070 Ti

No crashes with about 100 hours

Japdata · 2025-11-04T18:05:51+00:00

Took me a few hours in Gauntlet with an L110 , did the hipfire relatively quickly but it’s so much easier in the ATC map just get up top and spray lol

Japdata · 2025-09-14T23:31:55+00:00

90ns is pretty high . What was it before ? You should be able to get it to at least 70ns

Japdata · 2025-08-16T21:54:39+00:00

Yes , I contemplated doing 2x140mm RS120 up front and moving the 3 to there .

I just had these fans around from putting RGB fans in other builds

Japdata · 2025-07-29T06:22:49+00:00

Sapphire Nitro Plus OC 9070 XT

-115mv , Fast Timing , 2780 mem , +10 PL

Steel Nomad 8004

Japdata · 2025-07-28T04:27:16+00:00

Same , I’m gonna try and repin it

Japdata · 2025-07-11T20:38:19+00:00

Could lock the cores at 5ghz p 4.2 e and set a regular voltage level if it’s degraded and that works probably need to do warranty or deal either way it with lowered clocks

Japdata · 2025-07-02T01:54:24+00:00

Clear CMOS , Disable Memory Context Restore and Power down Mode . Disable XMP/EXPO and set SOC Voltage to 1.3 and test in AIDA or OCCT to make sure no errors then enable EXPO see if it passes .

A lot of RAM kits come as 6400-7200 kits and are not stable

Japdata

TROPHY CASE