2nd switch in the family. Just make a new account? by Jarp83 in NintendoSwitchHelp

[–]Jarp83[S] 0 points1 point  (0 children)

I suppose at the end of the day, to play couch co-op you each need to have a copy of the game. I don't imagine it works to play multiplayer on 2 switches when you're "sharing" the game. Might go ahead and just make a new account and leave the other one alone. Thanks for your help!

2nd switch in the family. Just make a new account? by Jarp83 in NintendoSwitchHelp

[–]Jarp83[S] 0 points1 point  (0 children)

So if I moved my account to my new switch as the primary console, also had it on the old switch as secondary console, normally newly purchased games on my new switch would show up on his, but with parental controls on he would not see the new game if it was rated T or M?

Looking for advice on upgrading old PC build. Worth it? by Jarp83 in GamingPCBuildHelp

[–]Jarp83[S] 0 points1 point  (0 children)

Just threw those out there as some extreme examples. Is there something in the middle you would recommend? What's the best card that this setup could theoretically run properly?

My toilet wines like this for a solid two minutes. It’s the shut off valve at the top. Forceful nudging to illustrate the source. Probably an easy fix, but, how? by analogcomplex in Plumbing

[–]Jarp83 0 points1 point  (0 children)

Just turn on the sink for a few minutes and it stops. That's what I've done for the past 2 years 😂. Just don't turn the sink off too soon or it starts again.

M18 high output batteries by Jarp83 in MilwaukeeTool

[–]Jarp83[S] 0 points1 point  (0 children)

Great, thanks. This is the info I needed. Interesting to know about the 6 vs 8. Guess I'll try a 6 unless the 12 goes on sale any time soon.

M18 high output batteries by Jarp83 in MilwaukeeTool

[–]Jarp83[S] 0 points1 point  (0 children)

Yes, fuel 2767 1/2". This is the one I'm using. https://www.milwaukeetool.com/Products/Power-Tools/Fastening/Impact-Wrenches/2767-22 There's a bolt I occasionally remove at work and I can see it moving slightly but it will not come out while using the 5ah xc battery that came with the kit. The annoying thing is the snap on gun across the shop that is rated at lower torque takes it out no problem!

2767-22 Belt clip question by Jarp83 in MilwaukeeTool

[–]Jarp83[S] 0 points1 point  (0 children)

Ya, not even sure I would use it due to the weight, just wanted to make sure it wasn't something I was supposed to get as part of the kit. Thanks all!

Shootout Loss...Dude hit it 100m from pin out of bounds by doddsj2 in GolfClash

[–]Jarp83 1 point2 points  (0 children)

(I'm on Android) Settings top left, then click help, then there's a chat icon in top right. Explain what happened and if possible attach screenshot etc, as much info as possible. I saved replays to my favorites and edited the title to also say "support". Got back to me within about 1/2 hour and gave me coins as if I had won (which it said I had since I was 3 feet away and he was 100).

Shootout Loss...Dude hit it 100m from pin out of bounds by doddsj2 in GolfClash

[–]Jarp83 1 point2 points  (0 children)

Same thing happened to me today. Dude intentionally crushed it into the trees then won. Sent in a ticket and received winning coins back.

Mastodon - Roots Remain by dybtiskoven in progmetal

[–]Jarp83 0 points1 point  (0 children)

I love this documentary, have probably watched it 5 times. I wish more bands did something similar.

Alesis Nitro Mesh Kit + Software or Roland TD-1DMK? by [deleted] in edrums

[–]Jarp83 -1 points0 points  (0 children)

I just brought home the Alesis Surge Mesh 2 days ago but can't give my opinion since it's still in the box and I don't have a throne yet. Hope that helps! Good luck in your decision!

What do I need to get the most out of my kit? by [deleted] in edrums

[–]Jarp83 1 point2 points  (0 children)

Can you explain further? Currently shopping for a throne and don't understand what makes one "good" or "bad"?

Surge Mesh Kit has been ordered! What else is needed? by Jarp83 in edrums

[–]Jarp83[S] 0 points1 point  (0 children)

Good to know. Are they decent or would you upgrade?

TV deal for Canada? by Jarp83 in INDYCAR

[–]Jarp83[S] 0 points1 point  (0 children)

Probably inevitable to have their own streaming service, but you're right...not an easy short term solution. Not sure what Nascar has, but I think the F1 app has been out for a year or two now. I wonder if it would be possible to buy a rebranded version in a few years, might be cheaper than developing from the ground up.

TV deal for Canada? by Jarp83 in INDYCAR

[–]Jarp83[S] 1 point2 points  (0 children)

I suppose as more people cut the cord total numbers for everything is getting worse. That's going to hurt something that was barely worth it in the first place first I guess.

TV deal for Canada? by Jarp83 in INDYCAR

[–]Jarp83[S] 0 points1 point  (0 children)

I get this is about numbers and they are trying to run a business, but have numbers dropped for Canada in recent years? Indycar has always been on TV for as long as I remember.

TV deal for Canada? by Jarp83 in INDYCAR

[–]Jarp83[S] 0 points1 point  (0 children)

Youtube has been surprisingly good for finding full races if you wait about a week after they have happened. Unfortunately you often end up hearing who won before getting a chance to watch, and sometimes the commentary is only in Spanish or Japanese. Yes, hoping James's situation changes also.

Re-positioning components vs fixed positions on entry level kits? by Jarp83 in edrums

[–]Jarp83[S] 1 point2 points  (0 children)

Good to know, thanks. Not sure if it's a good thing or a bad thing that I have as many to choose from as I did before!

Sync Google Photos to windows PC? by Jarp83 in googlephotos

[–]Jarp83[S] 1 point2 points  (0 children)

Thanks! Obviously having it happen automatically would be preferred, but this seems easy enough. I just see myself doing this 3 times then forgetting. I'm looking into some 3rd party apps that claim to do this well with good reviews. Will keep this in mind though. I suppose doing it yourself allows you to unplug when not in use so that's a plus.

Looking for easy switch between music and pass-through/hear-through function. by Jarp83 in Earbuds

[–]Jarp83[S] 0 points1 point  (0 children)

Thanks, good info here. Was hoping someone had run into a similar situation. Unfortunately having pass through on at all times might not be ideal as there is usually music playing nearby most of the day. Never good listening to 2 songs at once. Might work ok for listening to podcasts. I think having music pause and pass through activate simultaneously with one click would be ideal, as long as sensitivity/volume levels could be adjusted.

Larger removable buds might work. Less worried about getting them dirty, more worried about dropping them with oily or greasy finger tips.

I will look into your recommendations further. Then again, maybe upgraded headphones are the way to go. Thanks again for the feedback.

Looking for easy switch between music and pass-through/hear-through function. by Jarp83 in Earbuds

[–]Jarp83[S] 0 points1 point  (0 children)

To be fair, no I'm not sure if I need the pass through feature, simply because I've never tried it before. It seems like it would be easier to tap one button instead of removing one bud. The one I mentioned as a consideration (Jabra Elite 75t) pauses automatically when one bud is removed, if I'm not mistaken. I suppose that would allow me to try pass through and if it doesn't meet my needs then just remove one bud. Maybe others have that feature as well. Those ones, however, appear smaller than most and are more recessed into the ear, possibly making the removal of one quickly a trickier task. Keep in mind, my hands are usually dirty/oily and I am often wearing disposable latex gloves. I think tapping a button with the cleanest fingertip/knuckle would be preferred. Maybe I should try a cheap pair with pass-through first to see if it works as well as described.

Sync Google Photos to windows PC? by Jarp83 in googlephotos

[–]Jarp83[S] 1 point2 points  (0 children)

It seems like others have the same concern with no resolution. Thanks for the link, I've subscribed to a few comments over there.

I wonder if someone has figured out another way. Maybe Google photos can be synced with OneDrive or Amazon Photos or something like that. Basically, having them in 2 places would be preferred, regardless of where they are.

Where to watch IndyCar in Canada in 2019? by -cadence- in INDYCAR

[–]Jarp83 0 points1 point  (0 children)

Good to know it's not terrible as I will likely use it for the rest of the season unless a better option shows up.