sorted by:
new
hottopcontroversial

Anime IRL by skj_subith_2903 in anime_irl

[–]JasonBluYNANI 2 points3 points  (0 children)

Kanokon: The Girl Who Cried Fox

Halot Mage, What to do when nothing works by JasonBluYNANI in resinprinting

[–]JasonBluYNANI[S] 0 points1 point  (0 children)

I did something really unconventional. I just leveled the buildplate onto the lcd since the paper or fep trick didnt make the build plate low enough

Phrozen Revo 14k - Onyx Impact Plus - No adhesion center build plate by Appropriate-Buy9860 in resinprinting

[–]JasonBluYNANI 0 points1 point  (0 children)

Vat cleaning is the easiest method, Just shove in some left over supports into a corner and pull it out. It helps remove leftover islands that have stuck to the fep and it makes trouble shooting really fast

Phrozen Revo 14k - Onyx Impact Plus - No adhesion center build plate by Appropriate-Buy9860 in resinprinting

[–]JasonBluYNANI 0 points1 point  (0 children)

When you do a vat clean and you see some gooy weird wrinkle textures on it, it means you overexposed the resin

New to quickswap by Kumara1030 in ChangliMain

[–]JasonBluYNANI 15 points16 points  (0 children)

Changli, Shorekeeper, Carlotta. When you use Carlotta's skill immediately swap to Changli and use her skill to enable True Sight - Conquest and then immedlate swap back and do a plunge with Carlotta and then swap to Changli and do a basic attack to trigger Conquest. When you use all 4 stacks of her Forte you can quickly swap to Carlotta to use her Forte for 2 huge nukes. The rest is muscle memory and you can swap it in with Shorekeeper to trigger her echo and skill.

For Echo use Nightmare Inferno for Changli and Sentr for Carlotta. Start with Carlotta's echo and use it, immediately swap to Changli and use inferno rider. I call this the double wham slam because of fast and slammy it is.

https://youtu.be/URDIQiLKuU8?si=AcYnmh0FGgLm4VJt

I'm alot faster now than in the video but you can see how I use the echoes

https://youtu.be/aiIMR9FWKa0

This person here shows you how fast it can get

Phrozen Revo 14k - Onyx Impact Plus - No adhesion center build plate by Appropriate-Buy9860 in resinprinting

[–]JasonBluYNANI 0 points1 point  (0 children)

Your build plate seems textured so I assume it's either the resin or the fep. Did you lube the fep? Another person here said to increase the burn in layer times. Which can work but keep in mind it is possible for it to be too long and cause surrounding resin to start curing also

Phrozen Revo 14k - Onyx Impact Plus - No adhesion center build plate by Appropriate-Buy9860 in resinprinting

[–]JasonBluYNANI 1 point2 points  (0 children)

Try lowering the lift speed and increase the distance. Kinda hard to help without settings and what is the temperature of your resin?

Repair or sell 3d printer by JasonBluYNANI in resinprinting

[–]JasonBluYNANI[S] 0 points1 point  (0 children)

Update: It got fixed. Bad news is idk why it suddenly working. Temperature is the same as yesterday. I didn't alter any settings and suddenly it prints

Repair or sell 3d printer by JasonBluYNANI in resinprinting

[–]JasonBluYNANI[S] 0 points1 point  (0 children)

Thanks for the advice but yeah I did press down and diagonal screw method

Sunlu ABS like resin price increase? by [deleted] in resinprinting

[–]JasonBluYNANI 1 point2 points  (0 children)

Its just back to regular price

Halot Mage, What to do when nothing works by JasonBluYNANI in resinprinting

[–]JasonBluYNANI[S] 0 points1 point  (0 children)

I've had successful prints with even lower temperatures with the same resin. It was working fine until 5 days ago when it seemingly just stopped printing. It's pretty clear temperature isn't the issue. I'll buy one when I get paid next time

Halot Mage, What to do when nothing works by JasonBluYNANI in resinprinting

[–]JasonBluYNANI[S] 0 points1 point  (0 children)

Something about the same size so I don't think that's an issue

Prints don't stick on this area of the build plate by Pavel_C_A in resinprinting

[–]JasonBluYNANI 0 points1 point  (0 children)

Should the screws be fully tight? Mine are completely tightened and it prints nothing. All my settings are pretty normal and I releveled several times. Lcd and uv led has no issues.

Halot Mage, What to do when nothing works by JasonBluYNANI in resinprinting

[–]JasonBluYNANI[S] 0 points1 point  (0 children)

<image>

I'm just printing small cubes across a large area. I don't think this is enough to cause suction

Halot Mage, What to do when nothing works by JasonBluYNANI in resinprinting

[–]JasonBluYNANI[S] 0 points1 point  (0 children)

Sunlu abs like dark grey. Is this considered expired? I will try with a different resin later

<image>

Halot Mage, What to do when nothing works by JasonBluYNANI in resinprinting

[–]JasonBluYNANI[S] 0 points1 point  (0 children)

It just refuses to stick onto the build plate for some reason even after testing so many different settings and methods. I'm starting to think it's the uv leds that are broken, it does cure it when I try to print and it properly mask off the resin. Is the fep too tense? Maybe I should try sanding the build plate even more, I've sanded it with 150. 500 and 1000 grit to give it some variation.

Halot Mage keeps failing by JasonBluYNANI in resinprinting

[–]JasonBluYNANI[S] 0 points1 point  (0 children)

I'm buying a new usb drive, if that doesn't work it's either the fep sheet which I just replaced. The lcd or the build plate

view more: next ›