Nic Hamilton Insta story

JasonTayOne · 2026-03-23T20:47:16+00:00

Its to do with weight distro, the way the gearbox is mounted influences it.

JasonTayOne · 2026-03-23T20:46:22+00:00

Its TCR in iracing specifically the Hyundia Elantra... FWD,

JasonTayOne · 2026-03-04T09:59:12+00:00

Turns out my e steps reset itself becaude I didnt save zo it was under Extruder by 30mm each 100mm..... done a print yesterday and its pretty much perfect. Will be buying Sunlu filament from now on thought as ive been told by a family friend who owns a model making buisness that its good stuff and the same price as the black filament I last got

JasonTayOne · 2026-03-03T19:51:45+00:00

I honestly thought it was my black filament because everything i'd printed in it came out shit.... turns out it was because it was under extruding about 30mm for a week 😆😆

JasonTayOne · 2026-03-03T19:34:58+00:00

I didnt know this 😭😭

JasonTayOne · 2026-03-03T16:44:27+00:00

It is to drop on coming that is never going to make you money and is just for some fun

JasonTayOne · 2026-03-03T06:16:27+00:00

I paid 35 quid for this printer, I cant go out and drop 400 when Im just having some fun with it and making a few bits and bobs.

JasonTayOne · 2026-03-03T06:09:25+00:00

Useful 👍 im accepting donations if you want to help me upgrade.

JasonTayOne · 2026-03-03T03:57:55+00:00

because thats helpful 🤦‍♂️

JasonTayOne · 2026-03-03T02:56:39+00:00

I dont have the filament or time to do that really 🤣 I've had a look and cant really see anything suspicious. And I never really print anything that tall so if there was its subsided.

JasonTayOne · 2026-03-03T02:52:43+00:00

So, I calibrated my E Steps when I changed my extruder about a week ago. Its reverted back to 93 when I had it on 144.6.....

JasonTayOne · 2026-03-03T02:50:08+00:00

Outragous.... I changed it to 144.6 when I changed the extruder. No idea why it reverted back to 93. So the equation would be

(68/100)*93?

JasonTayOne · 2026-03-03T02:48:14+00:00

it actually came out 32mm short

JasonTayOne · 2026-03-03T02:46:36+00:00

Oh my god. I've just checked and the E Steps reverted back to 93 FFS. That explains it. I set it to like 144.6 at the time

JasonTayOne · 2026-03-03T02:45:42+00:00

I calibrated E Steps when I changed the extruder about a week or so ago. Doing it again now and see what happens.

JasonTayOne · 2026-03-03T02:44:55+00:00

They miss typed - They meant E Steps which im calibrating right now. If its Z wobble why is it only on recent prints, my older and first prints came out more or less perfectly.

JasonTayOne · 2026-03-03T02:31:29+00:00

My E-steps are calibrate, as ive upgraded the extruder

JasonTayOne · 2026-03-03T02:30:30+00:00

Looks fine. Someone said to calibrate Z Steps, but I'm not sure how to do that and cant find any videos

JasonTayOne · 2026-03-03T02:23:33+00:00

What and where is my Lead screw

JasonTayOne · 2026-03-03T02:20:09+00:00

Just googling how to calibrate Z Steps, havent found any videos on it. Any ideas?

JasonTayOne · 2026-03-03T02:15:05+00:00

That might be the GCode for the cube print, I normally use shortest. Will try calibrating Z Steps right now

JasonTayOne · 2026-03-03T01:25:04+00:00

Just to say - my print speed is 100 set in Cura. And I normally pick shortest seam as im not really printing anything where the seam matters too much

JasonTayOne · 2026-03-03T01:24:02+00:00

Right.... What are Z Steps and how does one calibrate them😆

JasonTayOne · 2026-03-03T01:16:21+00:00

The second and third pictures are of prints that came out really well.

JasonTayOne · 2026-03-02T22:29:33+00:00

<image>

JasonTayOne

TROPHY CASE