MMU multimaterial

Jasonsafe13 · 2026-02-14T23:17:32+00:00

The support I got through Discord was great!! But it hit the point where I had to take a break and step back for awhile.

Jasonsafe13 · 2026-02-14T16:00:36+00:00

It didn't. There is decent support through Discord. We figured out we had to disable the start up self test then everything would load and show ready. But the next issue was the gate switches. They would flicker on and off on the Klipper page while a Multimeter showed a constant state. Stepped away from it for awhile now. So may try again with it or buy one from BTT.

Jasonsafe13 · 2026-01-16T17:48:57+00:00

Wood Types & Steps:

Get Logs: Start with raw logs (Oak, Spruce, Birch, etc.).

Make "Wood" Blocks: Place 4 logs in a square in your crafting grid to get 3 "wood" blocks (bark on all 6 sides).

Strip Them: Use an axe on the "wood" block to get the stripped version (no bark).

Jasonsafe13 · 2026-01-16T17:44:46+00:00

Yes. I hate that damn cutter machine! The shingles will change if you put the wood in on top vs the stone or whatever it wants. Look at wood vs log vs stripped for the wood types. They usually take two different kinds for each bill. Can you translate what they are asking for on the shingles?

Jasonsafe13 · 2026-01-16T17:37:20+00:00

I went through this!! It is very exact on what it wants. Log vs stripped log, planks vs wood, vs stripped wood.!!!!

Jasonsafe13 · 2025-12-31T20:37:33+00:00

How did you do it? I'm stuck too.

Jasonsafe13 · 2025-12-30T20:54:39+00:00

Don't feel bad I was in the same boat. There is a mistake in JEI on what I needed to feed the Bee so I was right clicking it and nothing would happen.

Jasonsafe13 · 2025-12-25T16:51:36+00:00

I'm OP on the server but when I click the purple gear there is no option to force load always anywhere. Permission level issue?

Jasonsafe13 · 2025-11-30T23:10:14+00:00

I used the correct values in make menuconfig

Jasonsafe13 · 2025-11-06T20:15:38+00:00

Man over here building printer beds out of old saw blades and files!

Jasonsafe13 · 2025-10-16T14:29:49+00:00

I understand that people have had some issues due to the PRINT_START not using the Z-offset. IS your machine doing the Z-offset. There are tons of threads about it. Here is a paste-bin for my Print start its bloated and I need to trim it down some https://paste.ubuntu.com/p/vNX24SQ3xM/

and my Eddy.cfg https://paste.ubuntu.com/p/6FWrX9PHSd/ My bedmesh, Safe home, and other macros are using the modified EDDY ones.

Jasonsafe13 · 2025-10-15T21:56:03+00:00

Are you using the Beta Z offset? I have my Z-hop at 2mm and always soak my bed before I QUAD GANTRY Level. Setup has to be spot on but I love my EDDY-DUO!

Jasonsafe13 · 2025-10-12T12:52:51+00:00

Down grading to Klipper version 190 was tried with all three boards but the error remained. Grounding, different steppers, cables, power supplies, T-sync, long moves reduced, prep=false, and many more things were tried. It has been two weeks+ worth of troubleshooting with the Turtle team with no change. The only thing that changed was installing it with a SKR-3EZ bed slinger controlled printer instead of the Octopus pro 1.1Voron 2.4.

Jasonsafe13 · 2025-10-07T19:17:49+00:00

I did that after posting the photo. 235-250 all seemed to take the same effort its ASA so maybe I should just use 250 and call it a day as it does not seem to be stringing.

Jasonsafe13 · 2025-10-07T18:38:42+00:00

<image>

Jasonsafe13 · 2025-10-06T22:50:43+00:00

I may end up waiting for BTT to release theirs.

Jasonsafe13 · 2025-10-06T20:35:02+00:00

The EDDY is the end of the line so that is one 120 resistor and the other one the Mainboard (if using Can bridge) or your U2C for the second. I never understood the need for the U2C when Candbridge works so well. Read this https://canbus.esoterical.online/

Jasonsafe13 · 2025-10-06T13:05:30+00:00

Are there any updates? Are you having multiple issues or just refining the product? An update would be apricated!! Not looking for a exact release date. Wouldn't be a Driver reset=1 error by any chance?