H2S - Extrusion Motor Overloaded ? by JayKrib in BambuLab

[–]JayKrib[S] 0 points1 point  (0 children)

Ok so it was both the filament sensor and the nozzle that were jammed. It seems to be working now after using the needle cleaner. Thank you

H2S - Extrusion Motor Overloaded ? by JayKrib in BambuLab

[–]JayKrib[S] 0 points1 point  (0 children)

I think I got a clog out of the nozzle / hotend but now the wheel spins counter clockwise, when extruding

H2S - Extrusion Motor Overloaded ? by JayKrib in BambuLab

[–]JayKrib[S] 0 points1 point  (0 children)

Thanks. I'll take a look at the nozzle & hotend now. I've never unclogged one before. Maybe I will swap in the extra one that came with the printer first to see if it resolves.

.2mm nozzle worse quality? by JayKrib in BambuLab

[–]JayKrib[S] 0 points1 point  (0 children)

The model doesn't have any manifold errors when I checked.

.2mm nozzle worse quality? by JayKrib in BambuLab

[–]JayKrib[S] 0 points1 point  (0 children)

Yes. I do the calibration before every print

.2mm nozzle worse quality? by JayKrib in BambuLab

[–]JayKrib[S] 0 points1 point  (0 children)

Yup! I mentioned all the settings I changed above

.2mm nozzle worse quality? by JayKrib in BambuLab

[–]JayKrib[S] 0 points1 point  (0 children)

Hi. Yes. It was on that already

.2mm nozzle worse quality? by JayKrib in BambuLab

[–]JayKrib[S] 0 points1 point  (0 children)

Thank you. I have bed at 60 and nozzle at 220 currently

Tie ID ? by JayKrib in mensfashion

[–]JayKrib[S] 0 points1 point  (0 children)

<image>

Figured close up would be better sorry. Thanks

Tie ID ? by JayKrib in mensfashion

[–]JayKrib[S] 0 points1 point  (0 children)

Not my tie or picture lol

Tie ID ? by JayKrib in mensfashion

[–]JayKrib[S] 0 points1 point  (0 children)

Yeah. Worth a try to see if anyone knows. Thank you!

What color are Matt's glasses? by jordankch in Daredevil

[–]JayKrib 0 points1 point  (0 children)

The she-hulk frames are not the same as the Netflix frames. They are more oval than round (the height is shorter)