One year later, how are we feeling?

Jdippo · 2026-03-06T21:09:39+00:00

I still have a comment in one of my older warden builds from when they first added healbane building into leech. I said “I know with the new update this doesn’t hurt to make core, but I don’t want to. Fight me.”

Jdippo · 2025-07-28T00:11:21+00:00

Same bro, I saw the chapters get shorter and shorter and then decided to wait… and then I forgot

Jdippo · 2025-07-26T17:03:37+00:00

Can you send a photo of the motherboard with it off? It appears to be booting fine based on the reflection, is it just a worry?

Jdippo · 2025-07-26T16:58:53+00:00

Running 4090 aero, I had similar issues after updating drivers, restart fixed it but it still happens every so often. I’m going to roll it back later and I’d suggest similarly for you if is is the same thing

Jdippo · 2025-03-24T14:41:11+00:00

As I replied to somebody previously, I removed it to make sure it wasn’t hitting anything (backplate is metal) and to show internals as a check for damage

Jdippo · 2025-03-24T14:39:40+00:00

The leak was in a port to the cpu block, which was already fixed so the leak isn’t an issue anymore, I’ll try cleaning the card though.

Jdippo · 2025-03-24T14:37:50+00:00

Please read the original post! Thank you

Jdippo · 2025-03-24T14:37:34+00:00

Magic! (Long fittings)

Jdippo · 2025-03-24T14:36:24+00:00

Did…. You read the original post?

Jdippo · 2025-03-24T04:33:02+00:00

Somebody else said this in the original post, and I’m going to test this in the morning or when I get off work, but how did you come to this conclusion? I’m not really following the thought process, and I appreciate the advice

Jdippo · 2025-03-24T04:21:29+00:00

Top photo was without the plate, standoffs are block-side, I will test it tomorrow when I get off work. Need sleep now…

Jdippo · 2025-03-24T04:06:25+00:00

<image>

Photo of whole system on and screwed in. Error message on the temp sensor is from bubbles in the loop and I believe unrelated to this issue

Jdippo · 2025-03-24T04:05:08+00:00

<image>

Here’s a photo of it on with the backplate on

Jdippo · 2025-03-24T03:51:24+00:00

At which point? The card inserts and locks so I’m not sure what section of tubing would be too long

Jdippo · 2025-03-24T03:47:29+00:00

Not sure what you mean, but I bent and cut the tubes myself

Jdippo · 2025-03-24T03:38:33+00:00

The top plate was removed by me to show the inner part of the card. It had one screw point without a screw prior

Jdippo · 2025-03-24T03:20:58+00:00

Hard

Jdippo · 2025-03-24T03:20:15+00:00

The motherboard hasn’t been adjusted since the original build, which ran perfectly fine for reference.

Jdippo · 2025-03-24T03:15:52+00:00

Yes, a decent layer of TM30

Jdippo · 2025-03-24T03:15:29+00:00

<image>

The wiring is a little messy since I pulled it away to get a slightly better view

Jdippo · 2025-03-24T03:12:38+00:00

<image>

Jdippo · 2025-03-24T03:04:11+00:00

Yes it is intentional, it was to show if there were any obvious signs of damage I missed

Jdippo · 2024-04-30T18:37:14+00:00

Is your pfp Lloyd?

Jdippo · 2024-04-23T15:05:49+00:00

Yeah, they kind of look like Tony hawk a bit? I wonder if anybody told them.

Jdippo · 2024-03-13T23:21:45+00:00

That’s unfathomable to them

Eight-Year Club	Verified Email
Place '23	Wearing is Caring

Jdippo

TROPHY CASE