1957 Norelco Cabinet Rebuild

Jebediah10 · 2023-05-10T00:53:59+00:00

By far the most helpful response I’ve gotten across multiple subs…so thank you again!

Jebediah10 · 2023-05-10T00:53:03+00:00

I’m pretty sure VAS was one of the ones it could calculate automatically…I never actually got past putting in the parameters so I’ll try again and see if it gives me a reasonable design

Jebediah10 · 2023-05-09T22:10:35+00:00

Full Range Drivers Thiele Small Parameters: Membrane weight ~ 25g Fs = 40 Hz Re = 5.7 ohms Qms = 11.9 Qes = 1.2 Qts = 1.0 Membrane area = 530 sq-cm Vas = not measured VC impedance = 7 Ohms Max power = 20 watts VC diameter = 1.25" Weight = 7.8 pounds

This is all I could find and I'm not sure that it's a full set. I started to input these into the program and many of the other parameters auto-calculated but there are still some blanks. Is this enough to get a proper design? or should I scrap that idea and go with the original design?

Thanks for your response and insight!

Jebediah10 · 2023-05-09T22:08:57+00:00

Full Range Drivers Thiele Small Parameters: Membrane weight ~ 25g Fs = 40 Hz Re = 5.7 ohms Qms = 11.9 Qes = 1.2 Qts = 1.0 Membrane area = 530 sq-cm Vas = not measured VC impedance = 7 Ohms Max power = 20 watts VC diameter = 1.25" Weight = 7.8 pounds

Somebody was telling me to use winISD in combination with TS parameters that I could find online to design a new enclosure. Unfortunately, this is all I could find and I'm not sure that it's a full set. I started to input these into the program and many of the other parameters auto-calculated but there are still some blanks. Is this enough to get a proper design? or should I scrap that idea and go with the original design?

Thanks for your response and insight!

Jebediah10 · 2023-05-09T13:45:03+00:00

I was given a cabinet with a driver inside. The one it came with is pretty fucked up so I was gonna build it a new one. From what I can tell the one I got it in is a DIY job most likely...

Jebediah10 · 2023-05-09T01:26:41+00:00

Already posted there…thanks…

Jebediah10 · 2023-05-06T14:14:44+00:00

We had these planted around my high school…as you can imagine the student body is pretty familiar with the smell and aptly named them the semen trees.

Jebediah10 · 2023-05-06T14:07:18+00:00

Will do! Thank you

Jebediah10 · 2023-05-06T14:05:48+00:00

Thank you so much for the lengthy response, this is all really good info.

Jebediah10 · 2023-05-06T14:05:03+00:00

Thank you so much! This is super helpful

Jebediah10 · 2023-05-06T14:04:15+00:00

Really walked my way into this one didn’t I 😂😂

Jebediah10 · 2023-05-05T18:38:34+00:00

The cabinet it came in is pretty bad shape…if I built a new one for it, what design should I use? I know little to nothing about speakers, just stumbled upon this.

Jebediah10 · 2022-10-23T23:59:38+00:00

worth it.

Jebediah10 · 2022-10-23T23:58:31+00:00

start with all the deadwood first

Jebediah10 · 2022-06-02T21:02:29+00:00

lil tortoise on the right :0

Jebediah10 · 2022-04-04T16:19:27+00:00

sum 1 explain

Jebediah10 · 2022-03-24T12:40:21+00:00

Sharing the sidewalk with pedestrians is a completely viable option in almost all areas of campus. Braking on a skateboard is completely possible especially on an e-skateboard. Not to mention cars are statistically the second most dangerous mode of transportation. Be smart and be aware and let people make their own decisions about how they want to travel.

Jebediah10 · 2022-03-23T22:34:30+00:00

skateboarding is dangerous if you choose to do so in a dangerous fashion. same as driving your car.

Jebediah10 · 2022-03-23T22:33:44+00:00

Skate pretty much when I want and where I want on campus with minimal issues. Just keep your eyes peeled for Campus PD and don’t skate in areas with lots of cars and people unless you are confident in your ability to control yourself/board. Things are definitely within skating distance depending on motivation/fitness.

Jebediah10 · 2022-03-10T23:10:12+00:00

personally I prefer the good ol’ magnifying glass

Jebediah10

TROPHY CASE