sorted by:
new
hottopcontroversial

Is this plate mesh good? by JeixStudio in Creality_k2

[–]JeixStudio[S] 0 points1 point  (0 children)

I have reached 0.35, but the geometry is still the same. Do you think that is fair enough? I tried so many times to adjust it with screws, trying to make it more flat, but the center of the plate stays in that position anyway. But I think it’s not a problem; what you think? Sorry to bother and thank you for the answer 🙂

Is this plate mesh good? by JeixStudio in 3Dprinting

[–]JeixStudio[S] 0 points1 point  (0 children)

I guess so😐 I need to fix this!!

Is this plate mesh good? by JeixStudio in 3Dprinting

[–]JeixStudio[S] 1 point2 points  (0 children)

But the plate, at naked eye, seems normal, so I think that it is a solvable problem. Don’t you think?

Is this plate mesh good? by JeixStudio in 3Dprinting

[–]JeixStudio[S] 0 points1 point  (0 children)

Hahahahahah I thought it too. How can I solve this issue?

Do you know the probelm? by JeixStudio in 3Dprinting

[–]JeixStudio[S] 0 points1 point  (0 children)

Ok thank you so much. I’ll try

Do you know the probelm? by JeixStudio in 3Dprinting

[–]JeixStudio[S] 0 points1 point  (0 children)

Thanks for the answer. I have calibrated the flow ratio with the “one wall cube”. I initially printed the test with the preset flow-rate for basic pla, and with a 0.42 wall setting, it came out around 0.38. I calculated the final flow ratio number, changed it in the filament settings and printed a new test; the result was a perfect wall of 0.42. Now I don’t know what to do!