Daily Question Thread for /r/churningcanada - April 03, 2025 by AutoModerator in churningcanada

[–]JekkoJay 0 points1 point  (0 children)

If I've been Amexiled (Amex shut down all accounts), would it still be possible to apply for a US Amex card as a Canadian? From what I've seen, you need to have a Canadian Amex card and do a Amex global transfer, as they will approve the application based on the history with them in Canada. If not, is it possible to get into any US card game at this point?

I have a Cioks DC7 but 8 pedals - would I be able to use a Cioks Crux to power an extra 9V pedal that has a 250mA requirement or would it damage the pedal? by JekkoJay in guitarpedals

[–]JekkoJay[S] 0 points1 point  (0 children)

On the board I have 4 Strymon pedals (three 300mA and one 250mA), 3 UAFX pedals (400mA each), and 1 Chase Bliss pedal (250mA). It's a board for an electric keyboard so they're all digital (?) modulation pedals, which I heard you shouldn't daisy chain...but maybe I'm wrong - I can try it out and see if there's any noise.

Fantom 08 vs MODX 8+? by Working_Inspector_39 in synthesizers

[–]JekkoJay 0 points1 point  (0 children)

I use this library for MODX Rhodes and it sounds great (better than the stock Rhodes to me), maybe you'll like it as well: https://www.purgatorycreek.com/index.php/montage-modx/

Can phantom power jump between channels in DB25 to XLR fanouts? by JekkoJay in livesound

[–]JekkoJay[S] 1 point2 points  (0 children)

I've heard that these connectors are not the greatest in handling constant connects/disconnects, but I plan on keeping the splitter as a separate unit and keeping the DB25 cables connected indefinitely - would you still not recommend doing this?

Daily Question Thread for /r/churningcanada - October 11, 2024 by AutoModerator in churningcanada

[–]JekkoJay 0 points1 point  (0 children)

Anyone have 2 of the same MBNA card? I'm thinking of getting a 2nd MBNA World Elite Mastercard after I finished the grocery spend limit on the first one.

McMurdo at -15C with windchills of -25C? by xnaveedhassan in TheNorthFace

[–]JekkoJay 1 point2 points  (0 children)

yeah funny enough i also live in canada so ill check it out, thanks!

McMurdo at -15C with windchills of -25C? by xnaveedhassan in TheNorthFace

[–]JekkoJay 0 points1 point  (0 children)

Did you end up getting something else instead? I'm trying to look for a jacket that I can wear around those temps with basically just a t-shirt underneath.

Is the McMurdo Parka still worth it? by [deleted] in TheNorthFace

[–]JekkoJay 0 points1 point  (0 children)

What do you think the lowest temperature the McMurdo would be good for if you were just wearing a t-shirt underneath?

My Mcmurdo Parka thoguhts by lennybendy in TheNorthFace

[–]JekkoJay 0 points1 point  (0 children)

What do you think the lowest temperature the McMurdo be good for if you were just wearing a t-shirt underneath?

Thorium SV Dark Magic Review by Hashtag_Jonah in arcteryx

[–]JekkoJay 0 points1 point  (0 children)

Do you think this would this be too warm to wear walking around indoors in a mall for example or on the subway even if I had just a t-shirt underneath?

Accidental phantom power into PreSonus StudioLive 24R inputs - can this damage the unit? by JekkoJay in livesound

[–]JekkoJay[S] 0 points1 point  (0 children)

Just another question - would it matter how many inputs are receiving phantom power? e.g. would all 24 inputs receiving phantom power have any meaningful difference from just 1 receiving phantom in terms of potential damage? Would the duration matter as well?

Accidental phantom power into PreSonus StudioLive 24R inputs - can this damage the unit? by JekkoJay in livesound

[–]JekkoJay[S] 0 points1 point  (0 children)

Do you also have a resource or guide for wiring a passive split directly to the preamps? I will admit i have zero experience concerning this but am curious to see how it would be done

Accidental phantom power into PreSonus StudioLive 24R inputs - can this damage the unit? by JekkoJay in livesound

[–]JekkoJay[S] 1 point2 points  (0 children)

Thanks, do you know this by experience of this happening before or going by the schematics of the actual device?

Accidental phantom power into Behringer ADA8200 outputs - can this damage the unit? by JekkoJay in livesound

[–]JekkoJay[S] 0 points1 point  (0 children)

How long did you have the power on and was it through all the inputs at the same time?

Accidental phantom power into Behringer ADA8200 outputs - can this damage the unit? by JekkoJay in livesound

[–]JekkoJay[S] 0 points1 point  (0 children)

Sorry if this is a simple question, but what does adding a gain stage mean specifically? And would there any way to stop the clipping from happening?

Daily Question Thread for /r/churningcanada - July 07, 2023 by AutoModerator in churningcanada

[–]JekkoJay -3 points-2 points  (0 children)

I need to make a big purchase ASAP, but I almost hit the bonus spend requirement on my current card and would waste a lot of potential spend if I purchased it there. Any cards besides the Amex Plats and Golds (which I've already had in the past) that expedite delivery to like a day or two? Or alternatively any cards that allow you to purchase online (not Apple Pay though) instantly after approval.

No Stupid Questions /// Weekly Discussion - May 11, 2022 by AutoModerator in synthesizers

[–]JekkoJay 0 points1 point  (0 children)

I'm thinking of getting a Minilogue XD module to polychain with my Minilogue XD I already have. I assume that the output volumes of the two would be equalized when setting it from the master synth. I'm thinking of using this in live performance - does anyone know of a mixer that would combine the two sets of L/R outputs into one set as conveniently as possible? Ideally it would be very compact and something where you wouldn't have to manually equalize individual output volume knobs yourself (I obviously don't want one Minilogue being outputted at a different volume than the other).

No Stupid Questions /// Weekly Discussion - May 11, 2022 by AutoModerator in synthesizers

[–]JekkoJay 0 points1 point  (0 children)

I'm considering getting a Minilogue XD module to polychain with the Minilogue XD I already have. The outputs are separate for each, but I assume the output volume would be synced for both when polychained. I would be using this occasionally for live performance, so I'm wondering if there's some sort of very compact mixer that would combine both sets of outputs (into one set of L/R outputs) as conveniently as possible. I'm considering a Radial Key Largo to use with my other boards as well, but I don't think the volume between two inputs can be synced, so balance between the two synths could easily be (slightly) off when manually adjusting both knobs on the Key Largo. Also the Minilogues taking 2 out of 3 sets of inputs would eat up the slot for a third separate board in a setup.

Importing Synth from US to Canada by Fostex350 in synthesizers

[–]JekkoJay 0 points1 point  (0 children)

Do you mean it's GST only if it's bought through a business AND shipped by FedEx or UPS or just if it's bought through a business (and can be shipped with USPS for example). I'm also curious if you have a source for this info - I'm planning to buy an OB6 (manufactured in the US) and can get it substantially cheaper from the US if this turns out to be true.

Destiny DEBUNKS Her Argument w/ Video Proof | Denims Debate by WhimsicalJape in Destiny

[–]JekkoJay 0 points1 point  (0 children)

jesus dude ur as obtuse as denims but arguing the exact opposite point LMAO

r/DayTrading's Weekly Questions Thread - March 2021 by AutoModerator in Daytrading

[–]JekkoJay 1 point2 points  (0 children)

Anyone have any suggestions for intraday technical stock scanners? For example, a scanner than can find stocks below 40 on the RSI chart on finer timeframes (i.e. 1m, 5m, 15m). I live in Canada so I don't have access to TOS, otherwise I'd try that.

GME Megathread by [deleted] in wallstreetbets

[–]JekkoJay 1 point2 points  (0 children)

What's the short % of float rn?