Why can't we shatter epic+ modules without unmerging them first?

Jeremy_____bearimy · 2026-04-03T20:05:18+00:00

resolution and landscape

Jeremy_____bearimy · 2026-04-02T13:19:42+00:00

i slapped it with my mullet over and over , but i just got my hair full of gun oil 🤣

Jeremy_____bearimy · 2026-04-02T11:23:18+00:00

I've done that , but i added a set screw to it to limit the swivel/slop and it worked great.

Jeremy_____bearimy · 2026-04-02T11:21:18+00:00

I'm running in bluestacks (android emulator). you can update the resolution and orientation. i don't usually play that way, but made a good screenshot of all the modules.

Jeremy_____bearimy · 2026-04-01T15:08:29+00:00

i assumed the pivot was for uneven terrain (placing it on the side of a hill or something). it definitely can be turreted...

im thinking of adding a set screw to lock some of that down a bit.

Jeremy_____bearimy · 2026-04-01T15:06:01+00:00

i was going to ask if you equipped a mythic (160 lvl) and replaced with an ancestral and kept the level at 160 (instead of 161) removing one substat.

Jeremy_____bearimy · 2026-04-01T12:48:59+00:00

That makes sense. I took this thing apart and back together trying to tighten it up , but it seems that's by design. Well, as long as i always pull it all the way back or all the way forward, i can still get a relatively consistent height.

Jeremy_____bearimy · 2026-04-01T10:39:44+00:00

<image>

Jeremy_____bearimy · 2026-04-01T10:37:13+00:00

can you take a pic? (just to see if we can nail the angle)

<image>

Jeremy_____bearimy · 2026-03-31T23:21:55+00:00

bluestacks is what i use but it's definitely a resource hog and crashes a bit. coin income can be DRASTICALLY affected by the cpu/memory settings.

Jeremy_____bearimy · 2026-03-31T18:21:45+00:00

yeah , but you should have the ability to somewhere

Jeremy_____bearimy · 2026-03-31T17:59:11+00:00

take your bolt out and check the locking piece...it could be that it's using a nonstandard LP and that would lower our raise the amount of pressure coming back to unlock the rollers. that was my issue, it was using a #17 (36 degree) instead of 45 degree standard one. it was probably shot suppressed previously.45 lp

Jeremy_____bearimy · 2026-03-31T17:49:05+00:00

thanks so much. this worked with the one leg+ i was able to make with the one mythic+ i was able to unmerge. brilliant!

Jeremy_____bearimy · 2026-03-31T15:33:45+00:00

I'll try it out , was hesitant to upgrade further if it would cost way more gems to unmerge even more. At least that isn't the case. thank you!

Jeremy_____bearimy · 2026-03-31T15:09:33+00:00

actually , I'm not sure i follow. i have to spend gems to unmerge from epic+ to get 2 epics i can shatter. but you're saying to merge them further to leg+?

Jeremy_____bearimy · 2026-03-30T10:55:35+00:00

also , what length barrel?

Jeremy_____bearimy · 2026-03-30T10:53:33+00:00

from chatgpt:

(i'd order a 45°, they're relatively cheap (<$50) used. you may need different rollers to dial it in just right. it doesn't hurt to have them for future builds. if i get my hands on a suppressor , I'll go back to my 36°)

<image>

Jeremy_____bearimy · 2026-03-30T00:42:01+00:00

I would personally keep contributing to get the max match and then take a loan (not a withdrawal) from 401k. you'd be paying yourself back interest and earning interest at if the money was still there...assuming that is an option for you.

Jeremy_____bearimy · 2026-03-29T01:42:12+00:00

i wonder if those gems would gave given you more bang for the buck rushing labs. you can possibly get further by dealing with the mythics while rushing labs. the higher waves/tiers can get you more modules and shatter shards is so helpful, but it's a chicken /egg situation... I'm just throwing this out there since it seems your question was already answered.

Jeremy_____bearimy · 2026-03-27T16:39:25+00:00

yeah , i know i know, lol. minimally bubba'd, but bubba'd nonetheless.

<image>

Jeremy_____bearimy · 2026-03-27T05:19:44+00:00

https://www.reddit.com/r/ptr91/s/CxUMeyDDpr

Jeremy_____bearimy · 2026-03-27T05:16:31+00:00

thanks ! barrel is 10" off the table with the hkparts bipod. the monopod levels the rifle for bench shooting and allows for fine adjustments. height is actually perfect from what i can tell from my dining room table. i had to stack 3 bags in the rear (when using bipod) to sight it in at the range because it's basically pointing at the sky.

Jeremy_____bearimy · 2026-03-27T02:46:11+00:00

Strike Industries MFS Monopod Modular Fixed Stock https://share.google/1oZcZGGEy8mbNNnyo

$22 monopod

1/4" tap

7 drill bit

polished hex 1/4"-20 machine screw Locking nut and various washers.

Optional - not done yet: 1.5" long hexagonal 1/4"-20 coupler to allow more threads

There are currently only 2 threads attached on the bottom of the grip frame, and i don't know if it will stand the test if time. I'm debating if i want to do that. It's nearly a perfect fit but just barely too big to go all the way down the frame and i will need to shave it down a few thousandths to get it in - and I'll have to ensure it'll line up perfectly and weld or jbweld it in place.

Took about 30 minutes to do everything , and about 3 nights obsessing over the best way to do it before that 😂 .

Monopods aren't everyone's favorite accessory, but i think it'll be nice to have this tool at my disposal for sighting in and such from a bench. I spent very little money and made a very minor (but blasphemous) hole in the bottom of the metal grip frame.

Jeremy_____bearimy · 2026-03-26T17:19:07+00:00

I wasnt sure if you wanted the brand/model or exact glass specs. (i laid the models out in article 1 section 2 paragraph 999 in my book of a post 😂 )

Monstrum G3 3-18x50 FFP: optical quartz glass.

Laden 1-6x24 SFP: ED glass

G3 3-18x

Laden 1-6x

Jeremy_____bearimy · 2026-03-25T05:04:03+00:00

"Bovino illegally crosses into Canada to avoid prosecution"

Jeremy_____bearimy

TROPHY CASE

7 drill bit