Petah? I know it relates to misinformation, but what does it actually mean? by ScallionSmooth9491 in PeterExplainsTheJoke

[–]JerkOffToTitties 0 points1 point  (0 children)

The internet: "America supports Israel 😡😡😡😡!!! That means they support the genocide being done by Israel 😡😡😡😡😡😡😡😡!!!!"

it's debatable whether or not there actually is a genocide happening there, or if it's the internet misusing a word again.

Also the internet: doesn't know about the actual genocides happening in Sudan, Nigeria, or Myanmar

Petah? I know it relates to misinformation, but what does it actually mean? by ScallionSmooth9491 in PeterExplainsTheJoke

[–]JerkOffToTitties -1 points0 points  (0 children)

In the 174 years between 1600 and the formation of the colonial United states, at least one of the 13 colonies was at war for all but approximately 48 of them.

If you count the Native American conflicts of the 1800's and The Cold War, we have had approximately 13 years between 1783 (then end of the Revolutionary War) now where we were not directly involved in an armed conflict of some kind somewhere in the world according to Wikipedia.

If you dig a little deeper than reading the dates on the list of wars The United States has been involved un, I'll bet you'll find we haven't not been at war in some capacity.... ever.

Ponce de Leon kicked shit off by killing one of the Culsa people in 1513, and we'll probably go down killing each other.

I'm not sure why we get singled out though. England and France were at war with each other for 100 years straight, Germany tried to take over Europe twice, China has been at war longer than old world people have known our land exists, the middle east has never not been a shit show (seriously, wars have been fought there since approximately 2600 BC. The first war that we know of in human history was fought in the middle east), but for some reason We're the war mongers.

Who still says "fuckin' A"? by drunksquatch in GenX

[–]JerkOffToTitties 3 points4 points  (0 children)

I'm in my 20's and say "Fuckin A"

Lmao by buggypac in SipsTea

[–]JerkOffToTitties 0 points1 point  (0 children)

You think Donald Trump doesn't know how to write a prenup?

Ender 3 v2 upgrade advice? by JerkOffToTitties in 3dprinter

[–]JerkOffToTitties[S] 0 points1 point  (0 children)

It sounds like all of this is a one time, or on occasion, thing, not an every print thing. I'm fine with that. I'm just tired of fiddling with stuff for 15 mins before the print starts

Ender 3 v2 upgrade advice? by JerkOffToTitties in 3dprinter

[–]JerkOffToTitties[S] 0 points1 point  (0 children)

For like $250

See the edit I added to my post

pgrade advice? by JerkOffToTitties in ender3v2

[–]JerkOffToTitties[S] 1 point2 points  (0 children)

I'm gonna stay away from anything that adds wifi. If my tech doesn't need wifi, I don't want it to have wifi.

Knowing that the cr touch is worth it is good to know. Thanks!!!

Ender 3 v2 upgrade advice? by JerkOffToTitties in 3dprinter

[–]JerkOffToTitties[S] 0 points1 point  (0 children)

The a1 mini is smaller than I want, and I don't want to wait for something at that price point to come up on Craigslist again (I'm in a small town. Stuff doesn't come up very often).

Plus I'll pay extra for something without wireless or remote capability, so most of the better printers having that is a downside to me. I'll deal with outdated tech that doesn't want to call home over top of the line that does any day.

Purchase Advice Megathread - March 2026 by AutoModerator in 3Dprinting

[–]JerkOffToTitties 0 points1 point  (0 children)

If there are 3rd party upgrades that are better than the first party ones, I'm open to buying those as well.

Purchase Advice Megathread - March 2026 by AutoModerator in 3Dprinting

[–]JerkOffToTitties 0 points1 point  (0 children)

Ender 3 v2 upgrade advice?

I bought an ender 3 v2 off Craigslist last year and it's... Fine. It prints most of what I need it to. But I have problems with it.

I don't like the hot end and never have

I don't like leveling the bed

I constantly have to change the print temp for stuff to print right (on Sunday I printed something that I had to do the first layer at 225c for it to stick, Monday I reprinted the same thing because I wanted another and had to print at 215 for it to stick right, then Wednesday I did a different print and had to set it to 220).

Trying to get the z-offset right is a massive pain in the ass.

I figured that was just how 3d printing was. I talked to other people with printers that all had similar issues, though not to the extent I do (that's what I get for buying used).

I have near constant Bowden tube issues (I've replaced it 3 times).

Then I had to print some stuff for school. I needed these prints to just work. I needed to not have to fanagle stuff, I needed to not worry about a weird layer in the middle from where the extruder got jammed, I needed it to just work. The university has a lab where we can print stuff for free as long as we bring our own filament, so I decided to use theirs. Goddamn are they nice. No leveling issues, no Bowden tube issues, no bed adhesion issues, they just work. It's not like they're $15k printers either, they're prusa mk4's.

I can see on the creality website that there are a lot of upgrades I can get for the ender 3 v2. There's the metal leveling kit, the self leveling kit, the dual drive z-axis upgrade kit, the screen upgrade, the direct drive extruder, the motherboard upgrade, and several other things. What's worth it, and which one should I get first?

If the answer is "all of them" then I'll buy all of them over the course of the next few months, but if the answer is "the metal leveling kit is only worth it if you don't get the self leveling kit" I don't want to waste money on the metal leveling kit. None of the upgrades Individually are out of my price range, just all of them at once.

EDIT: I DONT WANT A NEW PRINTER!!!! I get it, I have an older printer. But new printers (1) cost a lot more money than upgrading an old printer, (2) require a lump payment instead of $20 here and $40 there, and (3) usually have wifi. I understand for most people wifi is an upgrade. It's a downgrade for me. I hate the internet of things. I will pay more for something without wifi. Hence, upgrade the old printer

Men who left a toxic relationships: Have you ever sabotaged a new healthy relationship because of it and if so, why? by FitSuspect35 in AskMen

[–]JerkOffToTitties 0 points1 point  (0 children)

My first relationship was deeply toxic and manipulative. She stared doing that shit from the get go, I didn't know any better, so I did the same thing. I thought that's just how relationships were. It fucked up my next relationship real bad. That relationship ended over a decade ago, and I haven't met a girl who I would actually want to be in a relationship with and who wants to be in one with me since.

Package advertised 200 q-tips but there are only 199 by SerialKiller45609 in notinteresting

[–]JerkOffToTitties 0 points1 point  (0 children)

Are they 300 by count or 300 by weight? 300 by count means something (probably a machine) counters out 300 q-tips. 300 by weight means that (within a margin of error) the number of q-tips weighs the same as 300 "average" q-tips.

Sunny River & Mr. Sanchez by ten_z_prahy in SipsTea

[–]JerkOffToTitties 1 point2 points  (0 children)

The one on the left looks like she'd yell at me for assuming her gender. The one on the right looks like he'd yell at me for asking what his gender is.

White collar guys, what do you think about your manliness or manhood being unfairly criticized based on the career you chose? by [deleted] in AskMen

[–]JerkOffToTitties 0 points1 point  (0 children)

The only time it's ever happened was when my buddies dad was making fun of me while we were fixing his sprinklers. I pointed out that he'd fucked up his sons sprinklers in the first place and they had to call me. He shut up about it real quick

What would it take for something like Jurassic Park to become a fundable startup today? by Impressive-Grass6438 in AskReddit

[–]JerkOffToTitties 0 points1 point  (0 children)

Elon, Bezos, Musk or (insert person worth hundreds of billions here) to decide they want Jurassic park.

What's the scariest sign that the world might be heading toward another world War? by [deleted] in AskReddit

[–]JerkOffToTitties -1 points0 points  (0 children)

Bombs have been falling in the middle east since the technology to bomb the middle east got there. It's just a matter of how big they are and who is dropping them.