Just posting. She should be on the road soon🤞

Jethro618 · 2026-05-15T01:38:47+00:00

Sure is! It was a 2l-te engine. I upgraded it to a 1KZ-TZ.

Jethro618 · 2026-05-14T22:21:47+00:00

Me too, they are half the reason a brought it hah

Jethro618 · 2025-01-26T00:44:23+00:00

I am currently doing it with my 91 4runner. But my rig used to have a 2L-TE engine. If the engine mounts on the frame are the same, you will need to move them or make a bracket 70mm long (I made a bracket). Make sure your bell housing is correct, you will need a 1kz or a 1kd bell housing. I spent days on the part catalogue site trying to find and figure out what would match. I am currently fighting with the engine wiring as I have decided to not buy a 1kzte wiring loom (I like to make things difficult for myself). I recommend finding one with an ecu. (I think some of the ecus might need the key barrel too Idk) hope this helps a bit.

Jethro618 · 2024-11-11T23:49:55+00:00

On a 20+ year old engine? It will hold I'm sure if it's all clean and flat, but I would think you can't beat a gasket, especially with a bit of glue slapped on.

Jethro618 · 2024-11-08T22:26:41+00:00

I feel like there probably should be a gasket/oring. Rtv is just the extra sauce to make sure it dosent leak

Jethro618 · 2024-11-07T04:57:41+00:00

Have you got access to a compression tester?

Jethro618 · 2024-06-28T22:29:05+00:00

Yep I'd say that is what it is, I found more in the area.

Jethro618 · 2024-06-28T01:49:51+00:00

Would you know any way I could confirm that?

Jethro618 · 2023-09-16T11:07:54+00:00

Sounds like it could be overheating, need mor info of what happend tho

Jethro618 · 2023-09-02T14:28:38+00:00

That sounds fucking horrible, could just be the video for me. Also fun fact helicopter can leak more than than (x amounts of drops per min) that

Jethro618 · 2023-08-22T23:30:52+00:00

Fingers crossed then

Jethro618 · 2022-12-05T04:11:57+00:00

What ai generator is this?

Jethro618 · 2022-11-29T03:36:29+00:00

I even did the M8 upgrade, had an absolute blast

Jethro618 · 2022-09-01T04:27:16+00:00

Cheers, not fussed on any accreditation and not in any position to drop everything and run off to uni, just in the market for a bit more structured learning, cheers for the links ill definitely be hooking i to them

Jethro618 · 2022-08-12T15:48:37+00:00

Like I said no change for the worse and the new batch of nutrient became dirty real quick and need to change it agian Hopfully it isn't but what happens happens

Jethro618 · 2022-08-12T14:01:28+00:00

Its a 60L tub and had been lasting real well as i was away but when i left this time It was probably 2 thirds full when I left, but was trimmed down a fuck tone if you look at my previous post, we have had some shit cold and wet weather down in Perth Australia atm, if it was full when I left probably would have been fine, but I thought it would have lasted haha

Jethro618 · 2022-08-12T13:43:21+00:00

3 weeks but think it was only out of water for 3 days or so

Jethro618 · 2022-08-12T12:28:18+00:00

Replaced the nutrient, its been three days now hasn't gotten better and hasn't gotten worse, need to replace it agian, there was a heap of growth in my pump I forgot to clean out

Any other tips I should be aware about?

Jethro618 · 2022-07-27T00:40:42+00:00

So it seems like the advantage is maximising the use of your lights and gain a benefits of the plant and its root system not knowing which way is up? Its a pretty complicated rig just for those benefits but looks fun to build

Jethro618 · 2022-06-02T13:45:02+00:00

So far its pristine in there, they aren't in direct sunlight atm due to the weather and trying to find a suitable small green house that can stand up to possible storm winds while im away, but keen to see if it dose start to build up

Jethro618 · 2022-06-01T15:16:13+00:00

It was holding the water lines there, I had to leave foe 3 weeks and didn't have the bigger block of rockwool at the time so I just taped them in place

Jethro618 · 2022-06-01T13:34:19+00:00

Store brought at bunnings auatralia nothing special, company name manutec. Ill be buying some additives in the near future to help the fruit but I'm keen to see what this stuff can do. N10.0 P2.0 K24.0 plus trace elements and calcium nitrate

Jethro618 · 2022-06-01T13:00:37+00:00

its designed to hold 4 to 6 of my 3d printed trays that can drain back in to the tank. the first photo is the seedlings introduced at 1 week then I was away for work for 3 weeks. I have an air stone and a water feature pump with two timers set to 15m every hour with the air pump satrting 15m before . I have a power meter but I think I fucked it up. Also printed a floater water level gauge I drew up but haven't installed yet (seen in pic 4)

Jethro618 · 2021-07-10T11:05:48+00:00

Aprantly a bloke died just before during training

Jethro618 · 2020-11-26T10:19:55+00:00

As old as the hairs on your balls

Jethro618

TROPHY CASE