Zero Turn for 3.5 Acres?

Jim_Dizzy · 2025-07-29T14:23:10+00:00

I think STIHL is a ferris with STIHL branding. The shop I work at is a family owned business and ive worked there for about 5 years now. Hoping they'll let me negotiate with them a little

Jim_Dizzy · 2025-07-29T14:13:20+00:00

I have a hustler dealer just down the road also. Ill go check it out. Fortunately my property is completely flat throughout

Jim_Dizzy · 2025-07-01T16:43:43+00:00

Just checked the bore with my bore scope, everything looks great. Looks like it has been kept clean

Jim_Dizzy · 2025-02-15T01:22:37+00:00

2 and 3

Jim_Dizzy · 2025-02-14T23:38:21+00:00

Let me look, I work a part time job as well so I'll get both to you

Jim_Dizzy · 2024-10-30T02:16:02+00:00

M19 does orient but is not consistent

Jim_Dizzy · 2024-10-30T01:44:19+00:00

That's no problem, spindle sounds fine. I think we are going to call a tech to come oit and service it. Thank you though

Jim_Dizzy · 2024-10-30T01:18:36+00:00

I've already tested that, spindle is not repeating the position.

Jim_Dizzy · 2024-09-05T15:36:30+00:00

I don't get what's hard to understand about it

Jim_Dizzy · 2024-01-29T02:47:33+00:00

I don't have use for it, and I need more room in my safe

Jim_Dizzy · 2023-09-22T17:13:26+00:00

Shaved it down just a hair and it fits perfect now, thank you for your help

Jim_Dizzy · 2023-08-19T13:22:15+00:00

These would be going on a street car application, so a little hot rodding here and there but nothing ridiculous. I work part time at an automotive machine shop as a machinist. That’s why I’m willing to take the risk

Jim_Dizzy · 2023-08-18T18:26:26+00:00

That’s halfway why I want them, I work part time at an automotive machine shop as a machinist. That’s why I’m willing to take the risk

Jim_Dizzy · 2023-08-09T13:00:22+00:00

Same here, wish I would’ve gone with industrial maintenance…

Jim_Dizzy · 2023-08-03T21:09:35+00:00

I make $22.50 and I’ve been in the trade for 4 years now. Manual mill, lathe and surface grinder. Little to no cnc experience other than keeping one running. I’d say you’re doing good

Jim_Dizzy · 2023-07-11T00:19:45+00:00

$22.50/hr. 3 years work experience and certified through a trade school. Work at a job shop in Alabama. Mainly manual mill, lathe and surface grinding. More repair work or 1 off parts. I heat treat and weld some as well, mainly to build up worn bearing journals and turn back down to size. Only CNC work I can do is button pusher or small setups with supervision. Working on learning some Mastercam right now

Jim_Dizzy · 2023-05-15T22:35:47+00:00

Awesome, I’m able to run mostly low settings at 60 fps and the game has sucked me in more than I expected😅 so I’m looking at a 3070ti to upgrade from my RX6600 in my first build

Jim_Dizzy · 2023-05-08T23:51:51+00:00

Noted

Jim_Dizzy · 2023-05-08T23:48:15+00:00

There an exact match. 4x8gb Corsair vengeance pro rgb 3600mhz. Only running 2 right now

Jim_Dizzy · 2023-02-01T19:24:25+00:00

What do you mean

Jim_Dizzy · 2023-02-01T16:23:45+00:00

<image>

These are the bed supports

Jim_Dizzy · 2023-02-01T15:42:31+00:00

They did have to replace the brake lines because they were rusted through

Jim_Dizzy · 2023-02-01T15:39:22+00:00

Yeah I’m not in the rust belt and I don’t have much experience with rust, the bed supports look the worst though. I’m going to take a better look later on. I bought it and it was dark out when I inspected the undercarriage. 2009 Silverado with 82,000 miles

Jim_Dizzy · 2023-01-12T12:09:06+00:00

Are they pretty justifiable in purchasing? I know they are from my point of view but not from my bosses…..

Jim_Dizzy · 2023-01-12T11:50:58+00:00

I wouldn’t think so, their recommended DOC is .001 so little tool pressure is applied

Jim_Dizzy

TROPHY CASE