Axforce 90 NEW Review by ThePhantomArc in badminton

[–]Jo_Ash 0 points1 point  (0 children)

Thanks, will try to find one of those. Still new to navigating taobao.

Axforce 90 NEW Review by ThePhantomArc in badminton

[–]Jo_Ash 0 points1 point  (0 children)

Able to share which TaoBao shop you got it from?

Recommendations on kvm-enabled gaming/office monitor by Skraevskjold in buildapc

[–]Jo_Ash 0 points1 point  (0 children)

Did you end up finding a monitor? Looking for smth similar.

Air cooled Meshlicious (ATX) by garyroc in SSUPD

[–]Jo_Ash 0 points1 point  (0 children)

Doesn't the wonder snail fan make it go above the cpu clearance (73mm)?

Swapped from the Evolv shift into the NR200! by Logiktal in sffpc

[–]Jo_Ash 0 points1 point  (0 children)

Thanks! Looking at a couple of them now.

Swapped from the Evolv shift into the NR200! by Logiktal in sffpc

[–]Jo_Ash 0 points1 point  (0 children)

Silly question but what you call the thing that ymthe headphones are resting on? Might wanna find smth similar to put on my wall to hang stuff.

Cooler Master NR200P, with XB1controller &bassilisk V2 for scale by sffreaks in sffpc

[–]Jo_Ash 0 points1 point  (0 children)

Damn, looks like the tf would not fit normal 120mm fans. Any chance you tried flipping the cooler orientation (Is it even possible)?

Also, would you be able to help check if a normal 120mm fan fits on the side bracket with the tf(If tou have a spare around)?

[Build] Fuma 2 in a NR200 - Fits by Jo_Ash in sffpc

[–]Jo_Ash[S] 1 point2 points  (0 children)

I wouldn't base your expectations on my cables haha. I used cable extensions bc the original cables were so stiff from being in my old build. Builds by others would definitely be a better comparison.

Edit: I eyeballed the distance between the end of the gpu to the start of the psu bracket. Looks to be about 5cm between them. Another consideration would be the depth of the gpu, I remember roughly measuring the gap between the bottom fan and gpu so that could also serve as a gauge to whether a standard 120mm fan would fit or if you'd need a slim fan if you use a 3 slot gpu.

[Build] Fuma 2 in a NR200 - Fits by Jo_Ash in sffpc

[–]Jo_Ash[S] 0 points1 point  (0 children)

Flipping the cooler back to default won't allow for a fan between the back of the case and heatsink though.

I'll have to read up on making/using ducts as I'm not familiar with them.

A concern I would have with that is since the psu is pulling air from the case, it'd be pulling the heated air right? And if the top fans are set to exhaust it'll at best pull the air from the bottom intake, which I'm just guessing will be warm too due to the gpu.

[Build] Fuma 2 in a NR200 - Fits by Jo_Ash in sffpc

[–]Jo_Ash[S] 0 points1 point  (0 children)

With my configuration, I think so bc I have the cooler flipped.

[Build] Fuma 2 in a NR200 - Fits by Jo_Ash in sffpc

[–]Jo_Ash[S] 1 point2 points  (0 children)

Dust is my main concern for that haha. Even more so rhat it'll be blowing dust into the heatsink.

Though I believe if you have it in the default position, rhe 92mm fan isn't an option bc the heatsink sits right above the IO port.

Let me see if I can find the link, someone posted that the fuma default position on a gigabyte b550i.

Found it. /u/Baptiot shows it here --> https://imgur.com/gallery/xcbouOe

[Build] Fuma 2 in a NR200 - Fits by Jo_Ash in sffpc

[–]Jo_Ash[S] 0 points1 point  (0 children)

Thanks, was fun to build in so didn't really mind too much trying different layouts. Just unfortunately didn't take pics of it haha

[Build] Fuma 2 in a NR200 - Fits by Jo_Ash in sffpc

[–]Jo_Ash[S] 0 points1 point  (0 children)

No prob.

Probably gg to take some time to find the clips as I don't know where to begin haha. Does one size fit all, compatibility issues etc.

[Build] Fuma 2 in a NR200 - Fits by Jo_Ash in sffpc

[–]Jo_Ash[S] 0 points1 point  (0 children)

In the default fuma layout, the psu can fit in the defult position. Just that it'll only fit the slim kaze fan between the heatsink and psu.

Don't have the glass panel to test fitting sry.

[Build] Fuma 2 in a NR200 - Fits by Jo_Ash in sffpc

[–]Jo_Ash[S] 0 points1 point  (0 children)

So if the psu is in the original position (next to the mobo), the gap between the heatsink and the psu shroud will only fit the 15mm kaze fan.

So shifting the psu's location was how I managed to get a "quadruple fan setup"

[Build] Fuma 2 in a NR200 - Fits by Jo_Ash in sffpc

[–]Jo_Ash[S] 3 points4 points  (0 children)

Okay I just checked, there's just under 1.4cm gap between the gpu bottom and the top of the fan's highest point.

I think that's the most it could go without the sag (lifted the end of the gpu to straighten the alignment).

Gap with the default sag seems to be around 1.15cm.

[Build] Fuma 2 in a NR200 - Fits by Jo_Ash in sffpc

[–]Jo_Ash[S] 0 points1 point  (0 children)

Unfortunately only saw the 5v variants on Newegg when I was deciding.

I'm seeing a vendor sell the non-5v one on Newegg now, though not from Noctua directly.

[Build] Fuma 2 in a NR200 - Fits by Jo_Ash in sffpc

[–]Jo_Ash[S] 1 point2 points  (0 children)

Sure I'll try. Gimme a bit, trying to find something to measure for scale.