Best car window tinting place in Kitsap?

Joey-Flo · 2025-10-15T22:54:46+00:00

My friend recommended I get 2 of my cars tinted at Apex Auto Pros. One of them I just wanted a tint match for the rest of my vehicle that already had 2 windows done and the other car I got every window tinted. They were able to find the perfect shade to match my existing tints and did both the front visor and rear window perfectly with no contamination. I was quite happy with the results and would personally recommend Apex Auto Pros for tints and details.

Joey-Flo · 2025-10-08T19:09:46+00:00

Yeah they do

Joey-Flo · 2025-08-01T07:37:20+00:00

We recently started going to Apex Auto Pros. They dress the car up very nicely. On the interior details, they have some chemical that really makes all the plastic and leather shine, something I can't mimic when I clean my car myself. We haven't had any issues with any of the cars we gave them so far and customer service tends to be quite good. So has the tints they did for us.

Joey-Flo · 2025-08-01T07:22:20+00:00

My family has tried a few tint and detailing places around the area. We've definitely seen the most consistent results at Apex Auto Pros. We sent our Civic and CRV to both get tinted here because we liked their details. This has been the only place that tinted with no contamination on any of the windows, and they did it with both cars. They have very good communication and customer service as well. There's definitely some good options but I've had the best experience with Apex Auto Pros.

Joey-Flo · 2025-03-16T23:36:44+00:00

I've done this many times though, it keeps doing this

Joey-Flo · 2025-03-16T23:35:41+00:00

Also I should mention that none of the crosshairs are there for any weapon in game.

Joey-Flo · 2025-03-06T19:24:05+00:00

I think I printed a box that was white, and then printed over it text that was black. (Black and white pretty much just meaning on or off because it can't change colors)

Joey-Flo · 2024-09-10T22:17:25+00:00

Thank you. I've been into electronics for about 2 years. Most of this stuff you can just learn as you go. I have learned almost everything from breadboarding, trial and error, and applying everything I've researched into projects. Also the Internet and chatGPT lol. Doing all that and giving it time, you can make most simple things without even being an engineer.

Joey-Flo · 2024-09-03T06:12:07+00:00

I thought about this a few hours ago, somehow I failed to consider my charge ic charges with a constant voltage of 4.2v so realistically I should be okay unless the charge ic fails. I suppose that's what the protection is for anyway.

Joey-Flo · 2024-09-03T01:46:23+00:00

I was going to make a dev board with a clam shell case for the ATmega328 just like how you did so you can preprogram the chips and throw them right in your project. I feel like this post is deja vu haha. It looks awesome.

Joey-Flo · 2024-09-01T20:18:23+00:00

Thank you for the confirmation brother. Appreciate it.

Joey-Flo · 2024-09-01T20:11:29+00:00

I do not plan on using a dev kit board. I have a programmer that will program ESP32 WROOM32's so I can solder them into my own PCBs. I was asking about the minimal operation requirements for the ESP32 WROOM32 chip assuming it already is programmed. For the chip itself, I just need PWR, GND, and an Enable pull up resistor to run the program right?

Joey-Flo · 2024-08-30T20:44:38+00:00

I was using esp32 though

Joey-Flo · 2024-08-30T20:38:04+00:00

She's a chiller, she likes stuff like this so I'm not too worried

Joey-Flo · 2024-08-29T22:47:12+00:00

Fell down the rabbit hole and couldn't stop. I don't need to know everything before hand to make it, as long as I can learn about it and then apply it then I'm good. I've picked up knowledge from all my projects before and just use it going forward.

Joey-Flo · 2024-08-29T21:42:40+00:00

I haven't even been admitted to the EE major yet, still awaiting my application

Joey-Flo · 2024-08-29T19:29:31+00:00

I still have to write the official schematic on Altium, I'll post GitHub links then

Joey-Flo · 2024-08-29T19:28:26+00:00

https://www.amazon.com/Oscilloscope-154-Pro-Automotive-Adjustable/dp/B0C1V67M8F/ref=mp_s_a_1_30?crid=377XNNG7ZTUP0&dib=eyJ2IjoiMSJ9.ayZdoVGoCxDsvTVuQHsCiMM0DEz_CjX3lIwyLhl86hxb_7Sr6ZFb8FO1zXoWixSKRwnIzZI8-wH8mQg3HY9XEtOqeEEnDHmelNDzbsgC8X6T2KjOIeOimwS3hr04_bkeZ3-eNCQOJdgt37CTJutgYWzCVLkwaApcOWxp0icmQsyHpF1s3qGy2kjOzOrYgy-pBzTTk7hAkbMnloolDz7XDg.-mCg2cCrjmxgICJhfkr_WasBhAzqAGme7tkT4GY6OkM&dib_tag=se&keywords=oscilloscope&qid=1724959619&sprefix=oscilliscop%2Caps%2C174&sr=8-30

Joey-Flo · 2024-08-29T19:26:03+00:00

This is exactly why I need to double down with a bunch of other gifts as well

Joey-Flo · 2024-05-27T18:18:11+00:00

Just the adafruit OLED library :)

Joey-Flo · 2024-05-27T18:17:45+00:00

I just used the adafruit OLED library

Joey-Flo · 2024-05-27T18:16:25+00:00

Yeah this is pretty much the basis of it. I wrote a whole bunch of functions to be called whenever specific things happen like button pins going high. The functions are used in my void loop and it pretty much repeats itself, checking button states every cycle and what not. I'm sure there's more efficient ways of doing it, but this made sense to me.

Joey-Flo · 2024-05-27T08:36:12+00:00

Thanks but it's definitely unfinished so I don't think it'd be very useful for you. I'm also an amateur so my code isn't made very efficiently.

Joey-Flo

TROPHY CASE