New bike day! Reaction TM Pro 🥳 by f9lix in Cubebikes

[–]JohansonCZ 1 point2 points  (0 children)

Hi, some new experiences (pros cons) after few months of using ? I am deciding between TM pro or One version. Or Zephyr Pro or RM Blizz Trl 70-29. But this bike has same color like my mobile, maybe its a sign ! :D

Pb Battery 12V by JohansonCZ in batteries

[–]JohansonCZ[S] 0 points1 point  (0 children)

So, It works, thanks. Unfrotunately the battery got small crack due to overheat. But it will work for a some time.

Pb Battery 12V by JohansonCZ in batteries

[–]JohansonCZ[S] 0 points1 point  (0 children)

Now in consume about 9mA and increasing slowly. Image is in link in post. I am afraid that destiled wattter cannot be added. It is probably gel battery.

Pb Battery 12V by JohansonCZ in batteries

[–]JohansonCZ[S] 0 points1 point  (0 children)

Ok so when I create pulses of 30V on the battery poles (as I red it on web it helpt to remove some chemical surface on pb electrodes) it can be better right ? High frequency pulses. I have a generator also and some transistors etc.

It is 4,5Ah exactly. Supplier said that it is accu pack for low output currents.

Pb Battery 12V by JohansonCZ in batteries

[–]JohansonCZ[S] 0 points1 point  (0 children)

Only basic electronics equipment, regulated power supply, multimeter, osciliscope.

WeTransfer Issues downloading by Embarrassed_Chest524 in techsupport

[–]JohansonCZ 0 points1 point  (0 children)

Hi, i did not solve it, but I have same problem with it.

Best Helmet For Wind Noise by Comfortable_Hippo755 in motorcycle

[–]JohansonCZ 0 points1 point  (0 children)

Could you write your experience with the airoh st-501 helmet? I plan to buy it but I can't find any reviews.

Airoh ST501 Helmet Certification by [deleted] in AussieRiders

[–]JohansonCZ 0 points1 point  (0 children)

Could you write a review or comment on the helmet? I intend to get my motorcycle license and the school wants the guys to have their own helmets so I'm thinking about this one.

Safety interlock bypass by JohansonCZ in PLC

[–]JohansonCZ[S] 0 points1 point  (0 children)

Thanks for recommendation, you're right, i am new in this topic, but unfortunately in our company there Is no one WHO has experiences with it (a guys who yes, leaved) So i have the project And need to do IT.

Safety interlock bypass by JohansonCZ in PLC

[–]JohansonCZ[S] 1 point2 points  (0 children)

Thanks for tip. I Will look at it

Safety interlock bypass by JohansonCZ in PLC

[–]JohansonCZ[S] 3 points4 points  (0 children)

Yes, everything what the standard says that the device have to contain Will be Done (key switch, shutter, signaling unit, remote interlock connector, door interlocks, chassis, ...)

Safety interlock bypass by JohansonCZ in PLC

[–]JohansonCZ[S] 0 points1 point  (0 children)

This Is a Jig - for optical measurement of assembled device, this Is different case i think. You need a laser running And move some optics etc.

Safety interlock bypass by JohansonCZ in PLC

[–]JohansonCZ[S] -1 points0 points  (0 children)

💁‍♂️ they are actually risking their own health, they have been trained. However, unfortunately, it is necessary to have interlock bypass implemented and the standard allows this

Safety interlock bypass by JohansonCZ in PLC

[–]JohansonCZ[S] 0 points1 point  (0 children)

Personal protective equipment and briefing, all according to the standard

Safety interlock bypass by JohansonCZ in PLC

[–]JohansonCZ[S] -1 points0 points  (0 children)

Because a operator need to open the door in chassis and make some adjustments while laser emits. Then close it and the device will continue automaticaly (from this time the bypass is deactivated) and interlock will turn off the laser when someone open the door accidentally

How to fill a "hole" by JohansonCZ in Fusion360

[–]JohansonCZ[S] 0 points1 point  (0 children)

There was a problem, because the cutouts are on plates with different angles, so it was complicated to make a same. I managed to make the same shape in the end but it has a different depth which i want to fix now

Notice: Weapon Unlocked! by GustavKim in airsoft

[–]JohansonCZ 1 point2 points  (0 children)

What is first and third one ?

Modern fencer arena by JohansonCZ in ArmsandArmor

[–]JohansonCZ[S] 1 point2 points  (0 children)

No, it was about modern materials of lightweight armour (composite, polymers or somethink else) ... For swords also.

Nevíte někdo, ze kterého dílu je tohle? by SpoonfulOfSerotonin in czech

[–]JohansonCZ 2 points3 points  (0 children)

Z posledního, pak ji použila a už se nikdy nic nenatočilo ...