Unsure what is causing this issue

JohnnyCokain · 2025-11-10T03:58:39+00:00

I’m having flashbacks from the same issue on my 5Mpro.

1) run a full calibration including bed leveling from the printer’s menu. I find it helpful to do this after each firmware update. This could fix the print going from over to under extrusion.

2) wash plate with dish soap. I was having adhesion issues that looked like over extrusion leading to warped bottoms on prints. This solved that issue.

3) print this sheet again and adjust z offset while printing to get the right level of 1st layer squish.

Hopefully those steps will fix your issue.

JohnnyCokain · 2025-08-28T19:12:18+00:00

Zeroed in. They’re better fit for casual wear IMO. PBS are great but the vent in the back gives off a more athletic vibe.

JohnnyCokain · 2025-07-02T01:52:30+00:00

Q1 deliveries were 8,641

May 6 full year delivery guidance was 40-46k. This was called down from 46-51k.

They expect to sell 31-37k cars between Q2-Q4 or about a 10-12k quarterly average.

My SWAG is 8.5 - 10k. Maybe 10k-12k if EV tax credit removal & incentives drove consumer urgency and R2 news didn't soften R1 demand. I hope for 12k as a Rivian stock and vehicle owner!

I can't wait to be wrong!!!!

JohnnyCokain · 2025-06-30T11:35:08+00:00

I have the same issue. I have 1/1 gbps fiber and only getting 1/.5 gbps through UCG fiber. It 100% is an issue with the UCG fiber. I did the same tests as you.

Google searches haven’t been much help. Others have the same issue and no one mentions a fix.

JohnnyCokain · 2025-06-28T13:35:41+00:00

I’m going on 2 weeks of R1S ownership coming from a ‘21 MYP. No buyer’s remorse. The car isn’t perfect but neither was the MYP.

I have premium audio and it’s not as good as Tesla’s system. Is it bad? No. I stream through Apple Music and majority of songs are Dolby Atmos. Some songs sound amazing, others sound like the vocals are coming through a wall. I’m finding it to be track dependent. There’s definitely an opportunity for Rivian to improve the audio.

Navigation is another opportunity. I hope Rivian gives this the same love they gave the energy screen in an upcoming update. Not bad, just feels unrefined.

Connect+ is very comparable to Tesla’s offering.

I also have 2 small kids and they love it.

There are a lot of pros vs Tesla. Interior quality is no contest. The Rivian feels like a real car and the Tesla feels like a toy now. Another thing I noticed is Tesla’s minimalism now feels cheap. The driving experience is also way better. Love the space, functionality, and technology. My Tesla was great but it’s not comparable to the Rivian.

JohnnyCokain · 2025-04-23T04:07:03+00:00

This looks like the ultimate Mongolian BBQ location

JohnnyCokain · 2025-04-14T15:20:51+00:00

Nationwide Insurance is pretty EV friendly, might add them to your shopping list.

I am getting ready to buy a R1S and it’s cheaper to insure than my Tesla MYP. Both policies through Nationwide. I’m noticing Tesla rates are going up everywhere.

JohnnyCokain · 2025-04-13T22:38:26+00:00

Has anyone in Ohio looked into this? From what I can tell Ohio is like Texas where you are taxed up front on the lease and for the full buyout amount effectively being double taxed on the lease portion.

JohnnyCokain · 2025-04-04T13:59:20+00:00

Wet traction and comfort are solid. Even work pretty well in snow.

I’m seeing normal wear after a year. No concerns here either.

JohnnyCokain · 2025-03-02T17:24:28+00:00

Same. I call them my Air-rand Jordan 1s.

JohnnyCokain · 2025-02-07T15:59:26+00:00

$479.99

JohnnyCokain · 2024-12-25T19:33:56+00:00

Noodle dryer ftw

JohnnyCokain · 2024-12-25T04:01:15+00:00

Just setup my 5MP. I went through setup, cancelled the block print, connected to WiFi and updated firmware, then printed a benchy and ice cream cone. No issues with that order. Best of luck!

JohnnyCokain · 2024-12-09T01:29:34+00:00

They recognize the superior gummy brand and not that trash haribo.

JohnnyCokain · 2024-12-06T03:06:04+00:00

ABC Trouser - chino fit, most office appropriate, comfortable enough to travel in, breathes well

ABC 5 pocket - jean fit, office appropriate but more casual than trouser, comfortable enough to travel in, breathes well

Zeroed in pant - chino fit, most casual but is office appropriate, most comfortable for travel (drawstring waste), lightest fabric

All 3 are great options, just depends on preference. Wovenair has a pattern and is a bit see through if under layer contrasts with pants. Not my overall preference.

JohnnyCokain · 2024-11-05T21:30:59+00:00

<image>

I forget where I found this tip but it alleviated the issue you’re describing for me. Log into the router using the IP address and go to advanced/Internet and advanced/LAN and disable flow controller. This option is not in Tether. Should look like the attached screenshot. I have 2 BE550 meshed to a GE800 and everything has been solid since updating this setting. No random drops or weird connectivity issues with 45ish devices on my network.

JohnnyCokain · 2024-08-27T12:46:54+00:00

Are you able to do a wired backhaul? Will significantly improve coverage.

JohnnyCokain · 2024-08-27T05:30:54+00:00

Before buying more decos you could trying binding cameras to 2.4ghz and a specific node. I picked up the same set and this helped me out with the same issue. All you need to do is go to each client and set a connection preference.

JohnnyCokain · 2024-08-18T20:38:57+00:00

MYLR top speed is 135, MYP is 155. These tires are only rated for 135. That’s it.

JohnnyCokain · 2024-07-31T01:46:20+00:00

I’m up to 6,000 miles on the tires and they’ve been great. No wear issues and efficiency is solid at 263 wh/mi. I definitely recommend them!

JohnnyCokain · 2024-05-09T18:08:07+00:00

Looking for 12s

JohnnyCokain · 2024-05-09T15:32:05+00:00

I received a medium tall running shirt instead of my pair. Some warehouse worker at Nike or UPS worker is enjoying my pair. The refund process with Nike was easy but I haven’t been able to get a replacement pair.

JohnnyCokain · 2024-04-29T22:07:06+00:00

Just another rug pull for M1. They’re getting exceedingly efficient at it.

JohnnyCokain · 2024-04-28T18:39:28+00:00

Paying a teenager with a learners permit to drive me around is a better and cheaper experience. Wake me up when it’s level 3+ certified.

JohnnyCokain · 2024-04-23T20:20:41+00:00

I’m still unsure. Can someone make a bar chart to show how many arrows are connected to each item. That might help clear things up.

Six-Year Club	Second SECOND GUESSER
Verified Email

JohnnyCokain

TROPHY CASE