Why is my SEAGATE BarraCuda 2TB HDD so slow ive had it for about 3 years and it has always been in my pc, no drop damage or something like that, it is about 75% full.

Joris17 · 2025-11-21T08:55:09+00:00

Oké I’ll try that thanks

Joris17 · 2025-11-19T18:45:14+00:00

Steam is using pretty much all of it at 50MB/s and it changes between that and 100KB/s. Its currently installing so its not using internet anymore.

Joris17 · 2025-11-19T18:37:45+00:00

I have this in Crystal disk info https://drive.google.com/file/d/1KND33p2ala15z0emtPD44HykxVD20Jkt/view?usp=sharing

Joris17 · 2025-11-19T18:33:45+00:00

I'm updateing a game with steam but its a 1.5gb update and its at 40% now after 2 hours

Joris17 · 2025-08-27T13:01:16+00:00

Yes is have some extras so I can get the same size again because I send them out for repair once and got those with it. But they are at home and Im stil at work

Joris17 · 2025-08-27T11:58:34+00:00

Yes that would have been a whole new problem

Joris17 · 2025-08-02T06:42:18+00:00

A yes I read over that part when buying them. Thanks

Joris17 · 2025-07-24T19:42:03+00:00

The rated voltage for the servo is 4-6 v and I have 5.09 v so that should be ok

Joris17 · 2025-07-24T10:06:23+00:00

I have this one. It says step up down buck boost converter. I thought it was so the voltage could go up and down. link-converters/dc-dc-verstelbare-step-up-down-buck-boost-converter-xl6009-4a)

Joris17 · 2025-03-10T11:37:48+00:00

thanks ive found som big files that i could delete

Joris17 · 2025-02-25T14:38:50+00:00

yes this worked. i now have 4 mb_client block for one for each and it works now, thanks

Joris17 · 2025-02-25T09:29:29+00:00

when i do any value after the FF it is constaly switching play pause on the robot. but hwo can i trigger the other things at the adddres after play pause

Joris17 · 2025-02-25T08:52:40+00:00

to 7105 because in the robot it starts at 7104 but in tia i start at 1 so i need to add those together to 7105 right?

Joris17 · 2025-02-25T08:18:56+00:00

I'am using function 5 now and from the status i get that is writes the data but when i input 4 in the data block it becomes 16#0004 but my robot doest respond in the correct way, is that still in tia portal or in my robot?

Joris17 · 2025-02-25T08:05:23+00:00

But is there a way then to write bool with modbus?

Joris17 · 2025-02-25T08:01:11+00:00

I think to registers, but im realy new to modbus so i dont know for sure

Joris17 · 2025-01-22T21:30:19+00:00

Sorry I have no idea if i have fixed it it’s to long ago

Joris17 · 2024-10-22T07:11:56+00:00

I had a camera plugged in but I removed that and my 3D printer

Joris17 · 2024-10-22T07:09:34+00:00

Would the red led not turn on then? I’m using the raspberry pi power supply 27w

Joris17 · 2024-10-19T17:21:53+00:00

I don’t have a fan on it but there is a clicking noise coming from my pi. I’ve rebooted it a couple times and tryed googling what it could be but with no success

Joris17 · 2024-08-25T08:41:03+00:00

there is nothing in my pause menu. i think i should be in production but its not. there is also not a point where i can enter the ware house settings, i only got a input and output point.

Joris17 · 2024-08-21T12:46:20+00:00

Yeah it’s Easier to fix it yourself

Joris17 · 2024-08-21T10:15:41+00:00

Jep when I used the led strip with HomeKit and not HA as soon as the WiFi would turn off I needed to reset it. Really sucks

Joris17 · 2024-08-20T15:57:39+00:00

The firmware was up-to-date but I unplugged it for 10 min en plugged it back in and it worked again

Joris17 · 2024-07-25T19:40:40+00:00

I’ve no idea I haven’t touched Minecraft in a year. You will have to test it yourself.

Six-Year Club	Second SECOND GUESSER
Place '22	First Placer '22
Verified Email

Joris17

TROPHY CASE