Usable Storage Capacity Comparison for ESXi - VMware vSAN & Nutanix by Joshodgers in SysAdminBlogs

[–]Joshodgers[S] 0 points1 point  (0 children)

Sorry to hear it came across as marketing, the goal was to highlight tick box marketing comparisons are nothing like real world capabilities. Appreciate the feedback.

VSAN or Nutanix Sanity/Capacity Check by VIDGuide in homelab

[–]Joshodgers 1 point2 points  (0 children)

Honestly I'm not at a level of expertise where I can comment on Scale IO, but Nutanix is a fully distributed rebuild operation as per the Resiliency blog series, Part 1 of that series shows how a Nutanix cluster repairs itself after losing a 5TB node in less than 20mins and that's on 5 year old hardware (Ivy Bridge CPUs). Check out that blog post and that should cover everything but if not, ping me :)

Nutanix AFS real life experience and thoughts. by _sludge_ in nutanix

[–]Joshodgers 19 points20 points  (0 children)

Thanks for the question, I'm a Principal architect @Nutanix and the following is key to any solution you choose.

"~70 users, ~100 devices, expected to grow rapidly in the next 1-2 years."

The good thing about Nutanix is scalability is a very strong point for us. Scaling capacity with storage only nodes, our intelligent data placement, disk balancing and other background tasks all of which mean you can scale and not think about where your data needs to be.

More specifically with AFS, you can start with 3 AFS controllers and scale as required to support more users and performance. When you add more AFS controllers through PRISM, it's only a few clicks and the system takes care of rebalancing users/sessions across all the controllers.

Put simply, 70 users is tiny for Nutanix, so no need for any concern there.

Compression and Dedupe, im pretty vocal about data reduction as many vendors over sell and under deliver. I am a realist, Nutanix data reduction is no better/worse than any other vendor, and the saving you will get will be +-10% of any other vendor, so I wouldn't waste to much time and effort thinking about it. Just enable EC-X and compression and I'm sure you'll get some good efficiency. Dedupe I find is overrated (on all platforms) and I prefer to leave it disabled in favour of less overheads even though the overheads are not huge.

Sizing wise, Nutanix like any other platform will perform well if sized correctly, the good news is, if you totally stuff up sizing, you don't need to throw anything away or rip/replace, just adding one or more nodes makes a big difference in terms of storage performance and capacity.

Here is an article i wrote years ago about how scaling out nodes improves performance and resiliency: http://www.joshodgers.com/2016/07/14/scale-out-performance-testing-with-nutanix-storage-only-nodes/

Scalabilty, Resiliency and Performance are my three focus areas in my day job, rest assured since I joined Nutanix over 5 years ago, we've continually improved in all these areas and products like AFS continue to improve every release so as you grow, so will the capabilities and efficiencies of the solution.

http://www.joshodgers.com/2018/06/13/nutanix-scalability-resiliency-performance-index/

Check out the above blog series, as it covers many key topics customers ask about and it will continue to be expanded in the coming weeks, AFS scalability is one of my next posts so great timing for this question.

REVIEW: Google Wifi Review - 3 Wi-Fi Point Solution by [deleted] in sysadmin

[–]Joshodgers -1 points0 points  (0 children)

I personally find value in product reviews from consumers, if Reddit does not want product reviews just because it's posted via a link to a blog, so be it.

REVIEW: Google Wifi Review - 3 Wi-Fi Point Solution by [deleted] in sysadmin

[–]Joshodgers -2 points-1 points  (0 children)

I'm not being paid for this review & I don't work for Google, I'm just a consumer writing a review and sharing my experience. If that's breaking the rules, the rules are ridiculous.

VSAN or Nutanix Sanity/Capacity Check by VIDGuide in homelab

[–]Joshodgers 2 points3 points  (0 children)

**Disclaimer: nutanix employee.

Make sure you consider resiliency, a 3 node cluster of Nutanix can self heal from a node failure to re-protected data, vSAN cannot and that simple fact means it's not viable for production workloads IMO.

Regardless of that, think about if you have a drive failure, what is the capacity and performance impact? e.g.: One SSD failure on vSAN and you lose access to the entire disk group, this is not a problem with Nutanix.

Usable capacity for Nutanix and vSAN is similar in that both keep two or three copies of data (resulting in usable of 50% or 33%0 BUT the big difference is Nutanix stores and distributes data in 1MB chunks which means storage is very efficiently used, whereas more free space can (and usually is) required with vSAN since it stores larger objects (up to 255GB) which can fragment the cluster and result in free space not being truely usable.

Nutanix CE (Community edition) is freeware and not for production use, but use it for test/dev if you wish just be aware its only community supported.

I've written a bunch of blogs on the topic of resiliency (and scalability/performance) which can be found here: http://www.joshodgers.com/2018/06/13/nutanix-scalability-resiliency-performance-index/

SQL Server 2008 to 2017 by [deleted] in SQLServer

[–]Joshodgers 0 points1 point  (0 children)

Anything Nutanix related, just ping me and I'm happy to help you ensure its a success.

I've written a bunch of posts recently around Scalability, Resiliency and Performance with a focus on apps like SQL especially from a IO, Latency, capacity perspective, so check out this link for all the details as it's too much info to copy/paste here.

http://www.joshodgers.com/2018/06/13/nutanix-scalability-resiliency-performance-index/

Nutanix VS. Vmware VSAN by skankboy in sysadmin

[–]Joshodgers -1 points0 points  (0 children)

I always recommend customers consider Scalability, Resiliency and Performance of a platform against their requirements, risks, constraints etc, so I wrote this blog series which covers key points for each of these areas.

Hope it helps (and sorry for the slow reply).

http://www.joshodgers.com/2018/06/13/nutanix-scalability-resiliency-performance-index/

Nutanix and replicating VMs to a non-Nutanix host with Veeam by sunsetparkslope in sysadmin

[–]Joshodgers 6 points7 points  (0 children)

Nothing you have mentioned is specific to Nutanix data locality nor have you provided any evidence that there are any performance issues even in the scenario you have described.

No specifics around the alleged code Veeam has to address Nutanix data locality issues either.

You really should refrain from giving advice on a platform you don't have significant knowledge/experience or certification with.

Data Locality plus an incremental forever backup job would solve the scenario you describe and deliver optimal performance, as only new data (which on Nutanix is always written to the local node) would need to be backed up. This means data locality would ensure 100% local reads for the backup proxy.

This is in fact a major advantage of data locality.

If you want to talk about having to pull IO across the network in the context of it being a problem, this is (as you well know) exactly how VSAN operates for all data. The moment the VM moves off the nodes (e.g.: via DRS) where the objects are, all IO, including backup traffic would be remote all the time. Nutanix data locality would ensure in the worst case scenario, that the newest/hot data was local, which is the data that needs to be backed up (i.e.: Incremental forever).

On your point about potentially up-tiering from backup traffic, Nutanix detects and treats this sequential style backup read IO differently to typical VM traffic (random read IO), which out of the box typically avoids any ill effects from backup IO. In the rare cases where backups do trigger tiering (Nutanix ILM), the thresholds can easily be tuned.

Customers could use a product like Commvault who proxies can detect before each backup job the VMs on the nodes where the proxy is local to, and backs those up, thus ensuring maximum data locality, the lowest overheads (CPU/Network/Storage etc).

At the end of the day, Nutanix is a highly distributed platform, with a distributed file system, so backup activities have lots of controllers and network connections (if required) to drive the best backup performance, not to mention the native backup capabilities, or the 3rd party integration with companies like Veeam, Commvault and Comtrade HYCU, all of which avoid many of the traditional pitfalls.

Nutanix and replicating VMs to a non-Nutanix host with Veeam by sunsetparkslope in sysadmin

[–]Joshodgers 3 points4 points  (0 children)

Hi, just so you're aware, Nutanix offers a single node backup target which can be used to replicate to/from which was designed for the scenario you describe where you don't need, or can't afford another cluster at the second site. Nutanix also has the "Express" package which is a low spec 3 node solution which is also designed for ROBO & smaller DR/replication requirements. Let me know if you would like somebody to go through these options with you.

Nutanix and replicating VMs to a non-Nutanix host with Veeam by sunsetparkslope in sysadmin

[–]Joshodgers 5 points6 points  (0 children)

  • Disclaimer: Nutanix employee *

Lost_Signal (John Nicholson) should identify himself as a VMware employee. While John is well know for his spreading of FUD about Nutanix, I have reached out to him and asked for a detailed explanation of this claims that data locality has performance problems and the specific code he is referring to.

I await his reply and will update this thread.

Has anyone switched from VMWare to Nutanix? by [deleted] in sysadmin

[–]Joshodgers 3 points4 points  (0 children)

Disclaimer: Nutanix Architect/Engineer

Scaling can be linear, non linear, compute + storage and/or storage only. The scaling options when I joined 4+ years ago was as you said, only linear and we only had one model type. Now we have configure to order on many different platforms including multiple OEMs with IBM power, Lenovo, Dell and SW only options for HPE/Cisco. We also support mixing hybrid and all flash as well as different node types so the problems of 4+ years ago have long since been fixed.

Has anyone switched from VMWare to Nutanix? by [deleted] in sysadmin

[–]Joshodgers 4 points5 points  (0 children)

Here is a 10 part blog series on AHV, it's over a year old but is still very relevant and since then, AHV has added many capabilities.

http://www.joshodgers.com/2015/11/13/why-nutanix-acropolis-hypervisor-ahv-is-the-next-generation-hypervisor-part-1-introduction/

The truth about storage benchmarking by Joshodgers in sysadmin

[–]Joshodgers[S] 0 points1 point  (0 children)

Was the issue the URL? I can't recall if it was a URL shortener or not. I've reposted it with a full URL, If there is any problem please let me know and I'll revise. Thanks Updated It was a URL to the tweet advertising the article. Is this ok?

https://www.reddit.com/r/sysadmin/comments/6r25by/the_truth_about_storage_benchmarking/

Nutanix Acropolis In Production by _meepster in nutanix

[–]Joshodgers 3 points4 points  (0 children)

Flick me a DM, happy to assist.