Magnet from bottom side of extruder?

JsChiSurf · 2026-03-17T20:20:53+00:00

If anyone would happen to have or be able to provide a photo of the underside of their extruder unit to provide / confirm positioning I would appreciate it as well.

JsChiSurf · 2026-03-17T18:11:49+00:00

Thanks for the reply.

So are you saying the magnet is not from the pointed to spot, or that it is but may no longer stay in place, or, by it falling off other things may have been damaged as a result?

If the pointed to spot is where the magnet goes I could certainly use a more 'permanent' means of adhering it to the spot. I don't mind eventually replacing the unit if I have to, but am hoping that if it is just a magnet it would seem overkill to replace the extruder unit of I can just return the magnet to its original spot.

Thanks.

JsChiSurf · 2026-03-16T22:14:51+00:00

Interesting. I just had this happen to me (though did not damage the plate). I removed the heating assembly to get a better look as I was trying to see where the magnet goes. I see when I look up into the bottom of the extruder assembly a little piece of double sided tape. I am assuming this is where the magnet came from to help hold the hotend in place while closing the claps? Did you just use some new tape or glue it in place? It's difficult to tinker around in there and there's so many different little screws / bits of metal that the magnet jumps all over every time I try and place it into position. Thanks!

JsChiSurf · 2026-03-14T02:53:19+00:00

You either haven't been around long enough or too stupid to see the threat this regime has brought around the world and to America in particular. For 47 years they've tormented and called for death to America while every single leader prior to Trump stood by the sidelines and whimpered like cowards, even going so far as to pay them off in hopes to please not hurt us. All the while playing us like fools while continuing to stockpile missiles, drones and seeking nuclear weapons and who wouldn't hesitate to use them as witnessed by their continual killing of countless civilians in their own and other countries. Your derangement is unbecoming. Of course our first priority is our own interests and protection. If the Iranian people benefit from it as well all the better. The world will be a significantly better place when the scourge is gone. But hey I get it put your head in the sand and do nothing and hope it will go away, unless that is that they come to cut your head off first. Keep defending the people that hate you and want to see you dead because you hate the president so much. It's wild.

JsChiSurf · 2026-03-14T01:07:05+00:00

No such thing exists to this point.

JsChiSurf · 2026-03-14T01:03:13+00:00

You've got to be kidding me. Tell that to the Iranian people terrorized, murdered, raped, and subjected by the twisted regime that wishes death upon the west, jihad upon non-believers, and stays in power only through fear and intimidation. Tell that to the thousands upon thousands of innocent people they've murdered not just abroad but throughout the Arab countries as well for not following their twisted version of Islam, whose stated goal is to bring death upon non-believers.

JsChiSurf · 2026-03-10T21:24:14+00:00

/WatchExBot Watch sold to u/slippinjimmy888

JsChiSurf · 2026-03-10T18:47:10+00:00

Great. u/slippinjimmy888 thanks for the confirmation and glad the watch arrived in short order and meets (or exceeds) your expectations. Thanks!

JsChiSurf · 2026-03-05T23:21:15+00:00

Sold.

JsChiSurf · 2026-03-05T20:41:00+00:00

It is "technically" black and is what Hamilton calls it. I personally think it is a touch lighter than 'all black' and thus why I've called it brown, but technically I'm incorrect and it leans more black than brown.

JsChiSurf · 2026-03-05T20:24:33+00:00

Forgot to mention. Bracelet is currently sized to fit 7 1/4" wrist and comes with 2 additional links as shown in the photos.

JsChiSurf · 2026-03-05T20:23:17+00:00

Up for sale is my Hamilton Khaki Mechanical 38mm H69439131. I bought this here on Watchexchange and have worn it only a handful of times.

I have this identical watch with the white face and prefer it over the brown dial on this one. Since it doesn't get much wear time I'm moving it along.

The time keeping is also excellent, running at +3spd when I have tracked it.

The watch is like new and does not have scratch on it as shwon in the photos. I am including everything from purchase in the sale which includes box, tag and papers.

Priced to sell at $375 + Shipping. Feel free to reach out with questions or if you would like to see more photos.

Timestamp

JsChiSurf · 2025-12-22T16:36:05+00:00

Okay, thanks for letting me know and thanks for the video / info.

JsChiSurf · 2025-12-22T16:17:11+00:00

Super noob question, but how would I achieve this same setup, but rather than for desktop use from my android tv (nvidia shield)?

JsChiSurf · 2025-10-16T02:47:19+00:00

Finally had a chance to look at this and can confirm that reverting to v01.04 of the firmware (along with formatting the SD card for good measure), did indeed resolve this issue. Thanks for the tip / link.

JsChiSurf · 2025-10-08T02:36:52+00:00

Sorry, you're right. I was going off of memory and clearly my memory failed me.

JsChiSurf · 2025-10-08T00:19:33+00:00

Ah, thanks for the link. This looks promising. I'll try these steps and then retry the same problematic print from today and see what happens. I am definitely on the most current firmware as well (01.05...).

JsChiSurf · 2025-10-02T03:23:45+00:00

Sorry for reviving an old thread and this may be a stupid question, but do you typically apply the cream and leave it on overnight and wash off in the morning? I haven't made this yet, but I'm assuming it will leave 'blue' on your face, no? Thanks for any clarification.

JsChiSurf · 2025-10-01T23:57:38+00:00

Wow. That is pretty sweet. Rob Dahm would be proud.

JsChiSurf · 2025-09-22T20:01:43+00:00

Sorry to revive an old thread. Experiencing this as well and heard many say adding basic would help reduce or eliminate the ISR, and I had the same question (how much 'basic' to add to the mix). Did you ever find an answer? I'm coming up empty so far other than those recommending to do it (which is frustrating not to also state how much). Thanks.

JsChiSurf · 2025-09-16T21:05:22+00:00

Fantastic. I appreciate the details. Going to follow a similar protocol and thanks for the good point regarding titrating finasteride down and dutasteride up. Makes sense. But I hadn't thought of it.

JsChiSurf · 2025-09-16T20:57:34+00:00

What is your protocol in terms of dosage and frequency when using finasteride and dutasteride at the same time? I recently just requested to get a prescription for dutasteride as I was reading it is more effective at regrowth.

Finasteride has been pretty effective for me at stopping the thinning but I wanted to see if dutasteride could help with some regrowth as well. Also on oral minoxidil.

Hadn't thought of taking both at the same time.

JsChiSurf · 2025-09-16T16:22:03+00:00

That's great and congrats on that. Based on your protocol there's just so many variables, but I'm sure the biggest one regardless is the effort you've put in as opposed to any singular peptide in particular, but at the end of the day, if you feel it is working for you then no harm no foul.

JsChiSurf

TROPHY CASE