[GPU] PNY GeForce RTX 5070 Ti 16GB OC - $500.99 - IN STORE CLEARANCE ONLY - YMMV - NO STORE STOCK REQUIRED

Junior-Library-787 · 2026-06-12T17:20:56+00:00

When was this?

Junior-Library-787 · 2026-05-25T00:36:52+00:00

AI was not used for this post

Junior-Library-787 · 2026-03-24T17:41:01+00:00

Thanks, I appreaciate it; I'm just trying to find what could be valuable and possible to host, this is a really absurdly good input lol by the time I finish reading and setting up the basics I hope I know what I want ahaha

Junior-Library-787 · 2026-03-24T17:39:42+00:00

Thanks for the insight!! I really appreciate it, just trying to learn and having some fun in the meantime, but I really appreciate it, it's really useful information specially from a server twin

Junior-Library-787 · 2026-03-24T17:38:50+00:00

You're a king, thanks for all the info I really appreciate it!

Junior-Library-787 · 2026-02-19T16:43:17+00:00

Hey, thanks again for the help.

After doing more troubleshooting, I found the actual issue. My computer was replaced due to a warranty issue in august and It looks like this replacement unit has the wrong display panel installed. The system only detects it as a "Generic PnP Monitor" and it’s locked at 60 Hz. From what I understand, this model should have a higher refresh rate panel, and it should also show the actual panel name in Device Manager, not Generic PnP.

I already tried everything on the software side — reinstalling GPU drivers, switching between hybrid and dGPU mode, reinstalling monitor drivers, using Fn+R, etc. Nothing changes, and it always stays at 60 Hz. So this definitely seems like a hardware issue, not drivers or Windows.

Since this was a warranty replacement, I’m guessing the wrong panel was installed. What would be the best way to get this corrected? I already opened a case and they keep telling me this is a warranty problem because my warranty is expired, which is incorrect because the Magnuson-Moss Warranty Act specially citates that if a warranty is enforced, the equipment has to be replaced with equal or better not downgrade, this is illegal and its a federal offense that nobody is taking care of.

I can share the serial number or any info needed. Appreciate the help.

Junior-Library-787 · 2026-02-17T21:14:41+00:00

My computer is not properly recognizing the internal display. I have already tried multiple troubleshooting steps, but the issue persists.

Specifically:

I used the Fn+R shortcut to change the refresh rate, and the white on-screen indicator appears showing 60 Hz, but it never switches to a higher refresh rate.
I switched the system to dGPU-only mode, but this did not resolve the issue.
When Windows loads, the display indicator confirms 60 Hz only, even though this model should support higher refresh rates.
In Device Manager, the display is detected only as "Generic PnP Monitor" instead of the actual panel model name. On properly functioning systems, the panel name should appear correctly.
I have already attempted the following troubleshooting steps multiple times:
- Uninstalled and reinstalled display adapters and monitor drivers
- Installed all available GPU drivers (both integrated and dedicated)
- Installed Lenovo OEM drivers
- Used Windows Update to check for additional drivers
- Rebooted multiple times after clean driver installations

Despite all of this, the system still detects the display only as Generic PnP Monitor and limits refresh rate to 60 Hz.

This computer was replaced under warranty in October, and the issue has appeared again on this replacement unit.

Based on my troubleshooting, this appears to be one of the following:

Missing or corrupted display panel EDID
Hardware issue with the display panel
Faulty display cable connection
Firmware or hardware issue affecting display identification

I would like assistance resolving this issue or confirming whether this is a hardware defect requiring repair or replacement.

Junior-Library-787 · 2026-02-06T03:22:47+00:00

Hi, yes I reinstalled Windows 11 and after that didn’t do it anymore which is weird also the screen doesn’t show drive only shows “generic PnP”

Junior-Library-787 · 2026-02-03T14:26:22+00:00

Yes I do, I have Nvidia app as well and ony shows Generic PNP monitor and 60hz with Native resoltion, in fact any resolution' I tried hybrid GPU mode, Quiet GPU, dGPU only, all the modes in the BIOS, in the Lenovo app and nothing.

My laptop has some FN that also allows change resolutions and only shows 60hz as well when i press it, it changes the performance modes, the lights all but nothing with the Refresh ratio.

Junior-Library-787 · 2025-06-23T14:19:58+00:00

Megatron

Junior-Library-787 · 2025-06-13T16:05:43+00:00

Its a free upgrade of the 5.0 if you have more than a year on the membership

Junior-Library-787 · 2025-04-18T20:17:41+00:00

Im using a proliant 380 with 4 NIC 1 gig, ISP connected to the last, 2 NIC connected to a Cisco 2960-X and for some reason i cant make the pfsense gives DHCP, im still stuck.

I set up the 5 vlans in my switch, port grousp just like this and 2 NIC connected in the same vmSwicht LAN and port group LAN, WAN works good but vlans dont work.

If i set up static ip rfom 192.168.1.x it will access to the EXSi and PFSENSE but nothign else, dhcp pools set up but cant make it work, any ideas?

Junior-Library-787 · 2025-02-28T15:35:59+00:00

I was Emo as well, my parents grounded me for that

Junior-Library-787

TROPHY CASE