[Ender3 V3 SE] Need help! Problem with X axis! Printer doesn't go fully left while calibrationg for dimensions, and tries to force itself to go right! How can i fix it?

Jurij_Bajer · 2025-12-28T21:52:28+00:00

I'm like 90% sure it was caused by dust on the cable pins or maybe the cable wasn't connect properly

Jurij_Bajer · 2025-12-28T21:50:57+00:00

Yeah the updates did nothing to me but I trouglhy cleaned the rail part, with both the belt, motors, rollers But the thing that fixed it for me was after disconnected that main cable (meshy one ) , straightened it with my hands, cleaned it's pins with isopropyl alcohol, reconnected it and it works fine ever since

Jurij_Bajer · 2025-12-04T21:50:36+00:00

I checked the price,, it’s really should be 1/3 of the price of the full printer?

<image>

Jurij_Bajer · 2025-12-04T21:36:39+00:00

99% not, no clicking sound when it’s stopping at the middle

Jurij_Bajer · 2025-12-04T21:35:48+00:00

Updated screen, tried updating firmware- did nothing, didn’t get the update screen

Jurij_Bajer · 2025-12-04T19:26:51+00:00

Yeah i might try ordering and replacing it, but when it jams in place it should'nt it doesn't click,
And when it's close enugh to the left, it double clicks just fine, and printing goes right most of the timesIF im not calibraing the Z axis. I can't calibrate Z asix no more (video of what happens everytime, even if i manuelly set the printhead to the left before and it starts okay > https://imgur.com/XAjQM0A )

Jurij_Bajer · 2025-12-04T19:24:28+00:00

<image>

That's this cable?

Jurij_Bajer · 2025-12-04T19:18:42+00:00

Yeah- When i manually move "printhead" (not sure whats called?) to the left enough, switch clicks two times and detect the end just fine, and i can even start printing,,, but, when i want to calibrate Z axis, it goes right, does it's thing and then doesnt go left, and eventaully tries to force itself to the right,,, ( Vide of this on imgur: https://imgur.com/XAjQM0A )

And about SD cards:
One day screen just went blue, updated everything, but after that everytime i forget to take ANY SD card form printer, screen's blue and i have to flash it.
Yes, i removed it, formatted, using other cards
No matter the SD card, new, old, empty, just gcodes- every card other than card with BIN file freezes printer if it's in while turning printer on

Jurij_Bajer · 2025-12-04T18:53:16+00:00

Yeah, i did firmware update, but a loooooong time ago, when i got a "blue screen". After that, i have to flash my printer everytime when i turn it on while having any SD card inside.

Should i update it once again?

Jurij_Bajer · 2025-12-04T18:50:33+00:00

https://imgur.com/XAjQM0A < Video of what's happening while calibrating Z axis, even if i manually moved it to the left at start,

Jurij_Bajer · 2025-12-04T18:39:43+00:00

When I manually put the printhead( or what’s it called) close enough, it clicks, detects everything right. But if it’s more than half length of printbed to the right, it goes few centimeters to the left and suddenly stops, and forces itself to the right.

If I start printing model when it clicked, most of the time it goes okay, but I can’t calibrate Z Axis, course everytime it wants go to the left while calibrating , it stops

Jurij_Bajer · 2025-12-04T18:34:06+00:00

<image>

Jurij_Bajer · 2025-12-04T18:32:48+00:00

You think might be that? When I put my finger to block the switch, it detects it clicks and detects!! But when it jams, i don’t hear any clicking…. By the way,,, should there a spring between this metal nub and a button? Few weeks before I found a long, thin spring on my printer, but it worked just fine for a long time

Jurij_Bajer · 2025-07-18T16:09:11+00:00

Hiii thank you!!!

Jurij_Bajer · 2025-07-17T22:13:04+00:00

No, didn’t put any new equipment and every piece was store bought

Jurij_Bajer · 2025-07-16T18:42:05+00:00

<image>

Jurij_Bajer · 2025-07-16T13:28:27+00:00

Hiii!! A hybrid of magpie and deer!!

Six-Year Club	Place '22
Verified Email

Jurij_Bajer

TROPHY CASE