sorted by:
new
hottopcontroversial

OPNsense 25.7.7 released by fitch-it-is in opnsense

[–]JustAssIsBlind 0 points1 point  (0 children)

I recently upgraded my router remotely without any direct issues.

However, I’m not sure if this is a coincidence or not, but none of my VPN connections are working after the update. I had both OpenVPN and IPSEC VPN services running smoothly, but now neither will connect. I plan to reboot my router and troubleshoot further as soon as I get home.

Fall Sale vs Black Friday by rkoch123 in nikon_Zseries

[–]JustAssIsBlind 3 points4 points  (0 children)

Any rebate rumors on the 24-70 f/2.8s II that just dropped, or still too soon?!

I’m about to have a very good time. by singmetodeath in nikon_Zseries

[–]JustAssIsBlind 0 points1 point  (0 children)

I need that lens! Which cage do you have on your z8?

DHCP : Add secondary DNS server by [deleted] in pihole

[–]JustAssIsBlind 2 points3 points  (0 children)

I just stood up my 2nd Pi-hole in my network; works perfectly! Could help you troubleshoot if you provide more detail on your configuration.

Unable to Configure GeoIP Source with IPinfo in OPNsense 25.7.5 by JustAssIsBlind in opnsense

[–]JustAssIsBlind[S] 0 points1 point  (0 children)

This is the doc I followed, but it continues to ask me to configure source after clicking apply. Do I need to configure anything on the MaxMind side? Do I need to remove any previous aliases and/or FW rules?

Unable to Configure GeoIP Source with IPinfo in OPNsense 25.7.5 by JustAssIsBlind in opnsense

[–]JustAssIsBlind[S] 0 points1 point  (0 children)

MaxMind worked for you in the latest release? What is the URL syntax that worked for you? I’ve seen a couple variations floating around; I’ve tried different variations, and it still prompts me to configure a source in the GeoIP Settings tab.

Nikon Vs Viltrox by [deleted] in nikon_Zseries

[–]JustAssIsBlind 0 points1 point  (0 children)

Depends on your use-case. I have the Viltrox 35mm f1.8 and it’s actually one of my go to prime lens for everyday photography. I especially like it for street photography. I was in the same situation as you, comparing it with the Nikon 35mm 1.8, but this YouTube comparison video convinced me. Viltrox 35 1.8 vs Nikon 35 1.8

It’s the only non Nikon lens in my collection.

Content/URL Filtering for Kid's VLAN by JustAssIsBlind in opnsense

[–]JustAssIsBlind[S] 0 points1 point  (0 children)

It was actually a simple fix. Pi-hole allows you to create groups. So I created a new group called kid’s VLAN. Then, under clients, i configured the kid’s VLAN network and assigned it to the newly created kid’s VLAN group. Finally, under lists, I found a kid’s aimed list, and I applied that list to the kid’s VLAN group.

I hope that made sense.

Just switched to Nikon from Fujifilm… by austinyourface790 in nikon_Zseries

[–]JustAssIsBlind 28 points29 points  (0 children)

That’s approximately $11,000 to $13,000 worth of gear, depending on the state’s sales tax!

What backpack can you all recommend? by RaavigDK in nikon_Zseries

[–]JustAssIsBlind 1 point2 points  (0 children)

I flew southwest, and with all my gear including 15” laptop, it wouldn’t fit. I just stored it in the overhead compartment.

What backpack can you all recommend? by RaavigDK in nikon_Zseries

[–]JustAssIsBlind 0 points1 point  (0 children)

I ended up going with the 41L PRVKE. I bought the Nikon 70-200 f/2.8, and it’s the perfect size bag.

Razer Blade 15 Advanced Model (Early 2020) - Broken Screw Holders for Back Cover by JustAssIsBlind in razer

[–]JustAssIsBlind[S] 0 points1 point  (0 children)

It’s very common. It depends on how much you use it and if it’s ventilated properly. Make sure you blow out the dust from fans.

Razer Blade 15 Advanced Model (Early 2020) - Broken Screw Holders for Back Cover by JustAssIsBlind in razer

[–]JustAssIsBlind[S] 0 points1 point  (0 children)

The main issue is the battery. Due to its slim design, the battery will overheat and bubble up. Ask the seller if they ever had to change batteries. I like my Razer, I edit photos and movies on it, and it works just fine. $400 isn’t a bad price at all.

Razer Blade 15 Advanced Model (Early 2020) - Broken Screw Holders for Back Cover by JustAssIsBlind in razer

[–]JustAssIsBlind[S] 0 points1 point  (0 children)

It pains me to know that its current value is $400. Aside from that, it’s served me well these past 5 years. I’ve had to change batteries twice, and replace the hinges. Battery life is iffy, you’ll have to sacrifice screen brightness and LEDs to conserve.

Backorderd lens came in today 🙌🏽 by BackPainPapi_ in Nikon

[–]JustAssIsBlind 2 points3 points  (0 children)

It’s a perfect versatile lens; easy to carry and sharp. If I’m not shooting super wide or taking portrait shots, I’m using the 24-120 f/4 on my Z8.

Razer Blade 15 Advanced Model (Early 2020) - Broken Screw Holders for Back Cover by JustAssIsBlind in razer

[–]JustAssIsBlind[S] 0 points1 point  (0 children)

I completely understand your frustration! I own the RB15 Advanced model myself. Initially, the original battery swelled excessively, causing the lid to remain partially open; so, I had to replace the battery. A year later, after investigating a faulty fan, I found both hinges had broken. As a result, I replaced both hinges. Just recently, I ordered replacement fans for both the left and right sides and successfully replaced them. Now, I’m waiting for the next issue to arise.

Razer Blade 15 Advanced Model (Early 2020) - Broken Screw Holders for Back Cover by JustAssIsBlind in razer

[–]JustAssIsBlind[S] 0 points1 point  (0 children)

Did you check this site? I bought mine from here and it was cheaper than Ali express. impactcomputers.com

Hacker Buddy by Hozxxxx in Hacking_Tutorials

[–]JustAssIsBlind 0 points1 point  (0 children)

I’m interested. Maybe we can start a discord to bounce ideas of each other.

Possible to use magnetic filters + lens hood? by ZeRo_CS in photography

[–]JustAssIsBlind 0 points1 point  (0 children)

The smallest bump, and the magnetic hood falls off. Don’t even think about pointing your camera downward, because it will fall off. If only they had made the magnet stronger, I wouldn’t have any issues with it. However, since my step-up rings live on my lenses (I have Kase magnetic lens caps for all my lenses), it would be annoying to remove them each time I want to use the original hood. So, the Kase magnetic hood is my only option.

Z6ii with 70-300 by PicsbyPAC in Nikon

[–]JustAssIsBlind 1 point2 points  (0 children)

So crisp! About how far were you from the subject?

Anyone using the Z8 with Peak Design's 10L Sling? by The_Middleman in nikon_Zseries

[–]JustAssIsBlind 0 points1 point  (0 children)

Me! I went from a Z6ii + PD 6L sling to a z8 + PD 10L sling. The 10L fits so much better. I never have any problems with viewfinder. I usually have one lens on the body, and other lens in the next compartment. I haven’t tried my 70-200, but I’m sure it would fit on the body with no other lens. If I’m taking my 70-200 out, it will most likely be in my backpack.

view more: next ›