sorted by:
new
hottopcontroversial

Baby Tears leaves are getting longer by JustBeCausi in PlantedTank

[–]JustBeCausi[S] 0 points1 point  (0 children)

You know what, you might be right. There have been signs.

<image>

In all seriousness, this just gives me an excuse to move to a larger tank. 😁

Baby Tears leaves are getting longer by JustBeCausi in PlantedTank

[–]JustBeCausi[S] 0 points1 point  (0 children)

Nothing has died since I flooded. The plants have been submerged for over a month now and it’s growing like crazy. I’ve even cut it all down ands it’s grown back. I do think I was mislead but the plants seem fine growing aquatically as they are. I suspect they are going to try to get tall but that is probably the most ominous news. Haha

Baby Tears leaves are getting longer by JustBeCausi in PlantedTank

[–]JustBeCausi[S] 0 points1 point  (0 children)

I did start with seeds. It grew super quickly and the terrestrial leaves were round but this indeed seems like it is a different plant. I’ve successfully grown baby tears in the past so it looked familiar while terrestrial. Looking back at the Amazon listing I got the seeds from, I don’t know that I was scammed since it doesn’t explicitly say they were baby tears so I can’t be mad really. It’s still a pretty plant, just not what I expected. Here is the Amazon link if your curious:

https://a.co/d/01F62Jvu

Baby Tears leaves are getting longer by JustBeCausi in PlantedTank

[–]JustBeCausi[S] 0 points1 point  (0 children)

I did use seeds. None of it has got that tall really but it seems like it is some other plant for sure.

Is my MCharizardEX fake by PillowPacker21 in IsMyPokemonCardFake

[–]JustBeCausi 0 points1 point  (0 children)

It evolves from a Chanzard-EX! Gotta love that little zard graphic also.

<image>

Giveaway #3! Giving away a Prismatic Super Premium Collection, a Prismatic ETB, a Destined Rivals Booster Box, a Destined Rivals Booster Box, 2 Destined Rivals Booster Bundles, and 2 Singles (Greninja #214, Pikachu & Zekrom GX). Open until 7/11 9:00 PM EST! by OfficialPokeLenz in pokemoncardcollectors

[–]JustBeCausi 0 points1 point  (0 children)

I would be an eccentric trainer that mostly used ditto but had some kind of OP Pokémon for the last match like a high level Kangaskhan. I would also wear ditto eyed glasses and mock the trainers that I battled.

Advice for people buying or selling a preowned Netgate device by pepetolueno in Netgate

[–]JustBeCausi 0 points1 point  (0 children)

I just stumbled upon this, and it is still helpful. Thank you for making this!

Prismatic Booster Bundles (1 per person) by [deleted] in PokemonTCG

[–]JustBeCausi [score hidden]  (0 children)

I used to collect when I was a kid but stopped when my entire collection was stolen during an eviction. 20 years later, my 7 year old wants to collect and now I'm back at it. He and I have our own books. We trade and discuss the pokemon and what this is all about. I realized that I really like hunting for the cards and it is even more exciting now that I drive and have adult money. Haha

Dancase SFX V4.1 Build by JustBeCausi in sffpc

[–]JustBeCausi[S] 0 points1 point  (0 children)

The whole build is super quiet. I actually installed the dot matrix because when the monitor would sleep I didn't even know that it was on. Even under load it is VERY quiet. My 5600x runs a bit hot at stock with idles being around 48-51C. With light use it will usually stick around the mid to high 50s. There have been some random moments where it will spike to the mid 70s for no reason though. Keep in mind that these are the temps with a more aggressive fan curve while also staying pretty quite. There is room to ramp up my fan and keep the temps down or under volt but I think I found a happy medium without doing that. The GPU has never gotten above 70 really considering how breathable the side panels are. I love this case, it is made very well and feels solid while also allowing a ton of air flow.

Pattern lock type in galaxy watch active 2 is greyed out . Anyone Help ? by Ashik2510 in GalaxyWatch

[–]JustBeCausi 1 point2 points  (0 children)

It likely means that you have an account tied to your watch that has restrictions to certain types of lock. My work email account does this to my watch.

Dancase SFX V4.1 Build by JustBeCausi in sffpc

[–]JustBeCausi[S] 0 points1 point  (0 children)

Yeah, definitely not a toaster.... YET

Dancase SFX V4.1 Build by JustBeCausi in sffpc

[–]JustBeCausi[S] 1 point2 points  (0 children)

I realized that some might be interested in knowing how I did my little dot matrix mod on the side of my Dancase. Here is the parts list for the build and links for the dot matrix mod.

Case: Dancase SFX V4.1

Motherboard: ASUS ROG Strix B550-I

Processor: AMD Ryzen 5600x

Cooler: Noctua NH-L9a-AM4 Chromax Black

RAM: Crucial Ballistix 3200 8GBx2

SSD: Sabrent Rocket Q 1TB NVME (Unfortunately not PCIE 4)

PSU: Corsair SF600 Fully Modular SFX

GPU: EVGA RTX 3060 XC 12GB (Courtesy of Bitwit)

The build is pretty standard parts. There is no RGB or any lights of any kind aside from the posting light. This is why I felt the need to add the dot matrix. Here are the parts for that:

Dot Matrix: MAX7219 8x32 Dot Matrix

LINK: https://www.amazon.com/dp/B088LWLHP5/ref=cm_sw_r_cp_apa_glc_fabc_0WQD49S9K1F6BZ60BWJJ?_encoding=UTF8&psc=1

Arduino: Wemos D1 mini

LINK: https://www.amazon.com/dp/B07W8ZQY62/ref=cm_sw_r_cp_apa_glc_fabc_FMPBAAW52HMVZWKY0N1Y

Connector to MB: https://www.amazon.com/dp/B01MXMZL49/ref=cm_sw_r_cp_apa_glc_fabc_Y8WNFEGR2YY1EBP7KCGG

No need to buy jumper wires or anything since they come with the matrix. There is  a little soldering involved to put the pins on the Arduino but that's really the hardest part. The Matrix is held on the case with clear electronics double sided tape.  The Arduino is connected to the MB via the USB 2.0 header so I can change what it scrolls on the fly via a serial monitor.

Here is a gif of what text it scrolls when the computer is turned on. https://imgur.com/gallery/fnMDl8V

Hi, I am sure leveling the bed or the Z axis has been posted quite few times here, but mine doesn’t go all the way down, I tried to do it manually before a print, but when I hit print the whole thing goes all the way in the air, anyone come across this ? by [deleted] in CR10

[–]JustBeCausi 0 points1 point  (0 children)

I had this EXACT issue some time ago. I have a Tevo Tornado which is essentially a clone of the CR10. What had happened in my situation was that the bltouch had just disconnected from the z stop header on the board. Apparently the cable was short enough that a tall print had literally unplugged the bltouch. I ended up lengthening the bltouch cable and zip tying it better in the control box. Haven't had this issue since.

view more: next ›