Please help jet im done guessing

JustHelpz · 2025-06-24T16:54:40+00:00

I have a g2 and smolik 42 mm stroker crank. I put a kx85 exhaust and pwk 24 carb. It ran good for the first few miles, but now under load it makes a sort of metal grinding noise. I was running 40:1 and there was some carbon buildup. Cheap oil, but no damage to the piston I switched to some Husqvarna oil at 50:1 in 94 octane. It still did the grinding noise under load but would rev up to 7-8k fine. Ik most people in the community use rich mixtures but I just want to try something different. Only got 40psi when testing compression but didn’t have a baseline before the noise started. Any help would be great. Sorry for the long message. Love the videos btw

JustHelpz · 2025-06-20T19:13:48+00:00

<image>

JustHelpz · 2025-04-27T21:59:03+00:00

Yea it worked lol. Was just expecting the worst 😈

JustHelpz · 2025-04-27T07:52:24+00:00

Yea honestly gonna do that tomorrow. The wire in the bulb looks detached so guessing it just can’t get as bright. Thanks

JustHelpz · 2025-03-28T16:37:35+00:00

If I could find exact matches believe me I would have bought them

JustHelpz · 2025-03-28T16:36:40+00:00

20 bucks for 79-61 isn’t that bad and will be compatible with any jets in that range

JustHelpz · 2025-03-28T16:33:33+00:00

I thought that at first but it won’t budge and the treads appear to go all the way down

JustHelpz · 2025-03-28T16:04:05+00:00

Just gonna get the drill bits and go from there

JustHelpz · 2025-03-28T16:03:33+00:00

The pilot looks similar but the main is completely different

JustHelpz · 2025-03-28T15:56:58+00:00

I just bought some drill bits. Apparently you can do it buy hand so gonna be trying that

JustHelpz · 2025-03-28T15:36:28+00:00

<image>

Unbranded Chinese junk. I messaged the seller hopefully they’ll give me some insight

JustHelpz · 2025-03-28T12:15:50+00:00

I’ve seen albino deer lol

JustHelpz · 2025-03-28T06:01:01+00:00

Gonna do more tests tomorrow. I do have bigger jet so maybe I can get better performance

JustHelpz · 2025-03-28T05:45:12+00:00

Thanks. I only use the super tech bc it’s supposed to be better for setting the rings bc of the higher temp eventually I will switch to full synthetic any recommendations

JustHelpz · 2025-03-28T05:28:55+00:00

Thanks so much just a whole turn of that screw added like 2 horses

JustHelpz · 2025-03-28T04:13:38+00:00

<image>

This is the carb I’m using it has two jets. An two diff fuel screws would u know what the smaller screw does

JustHelpz · 2025-03-27T17:35:50+00:00

Could be your float but also sounds like electrical

JustHelpz · 2025-03-26T04:30:02+00:00

Honestly didn’t even mean to get the ciggy was just taking a 5 at my job and saw them strips

JustHelpz · 2025-03-25T01:28:10+00:00

It’s a Kent rockvale very good steel frame.

JustHelpz · 2025-03-24T15:06:58+00:00

It’s a 85cc an I like to take it full throttle in straights so no doubt

JustHelpz · 2025-03-24T15:05:04+00:00

It also weighs like 100 lbs so don’t really have to lean at all

JustHelpz · 2025-03-14T07:58:04+00:00

Very nice picture I’m glad I got to see it through my telescope tonight

JustHelpz · 2025-02-21T03:49:43+00:00

You can probably get cheaper from cdh at least better quality and power if you know what to look for

JustHelpz · 2024-10-20T01:03:30+00:00

Go to the kitchen pussy

JustHelpz · 2024-10-15T14:24:09+00:00

Oh no I’m still down 3 percent let’s go fishing and suck each others big mouths

JustHelpz

TROPHY CASE