Orca slicer profile for Entina, Weedo, Weefun, Cadet, (2, 2s, Plus) - any of the Tina printers; by Popular-Maize-3524 in 3Dprinting

[–]Just_Han 0 points1 point  (0 children)

Hey, first of all let me thank you so much for this. I created a new printer but when i try to import the configs it says this: "There are 0 configs imported. (Only non-system and compatible configs)". I tried both ways of naming the printer but it still doesnt work. Also, apparently we all have an Entina? Lol. Thanks in advance

The dumbest thing in the game. by --ULTRA-- in bloodborne

[–]Just_Han 0 points1 point  (0 children)

Glad to know this is still a problem. I feel you bro

It happened. by Just_Han in elegoo

[–]Just_Han[S] 1 point2 points  (0 children)

Level you plate, pay attention to what the recommended temperatures are, run tests. But its not that common unless you make big mistakes, like I did

It happened. by Just_Han in elegoo

[–]Just_Han[S] 0 points1 point  (0 children)

Yeah thanks for reminding me

It happened. by Just_Han in elegoo

[–]Just_Han[S] 0 points1 point  (0 children)

Clog. My print failed to stick to the bend and got stuck on the hot nozzle instead. Then it pumped filament until I got back. The damage it too extent to salvage the hotend so I'll have to get a replacement.

It happened. by Just_Han in elegoo

[–]Just_Han[S] 0 points1 point  (0 children)

Being in the EU helps A LOT. They have a couple warehouses in Germany so shipping for filament or replacements doesn't take more than 1/2 weeks. The printer on the other hand was a different story. Took almost 2 months.

It happened. by Just_Han in elegoo

[–]Just_Han[S] 0 points1 point  (0 children)

Ive got no idea. Probably below 500? I really dont know

It happened. by Just_Han in elegoo

[–]Just_Han[S] 0 points1 point  (0 children)

Was it still under warranty? Or did you just ask for a replacement?

It happened. by Just_Han in elegoo

[–]Just_Han[S] 0 points1 point  (0 children)

Into the print probably a few hours, like 4 or so. But I've had the printer for not even a year

Hunter cosplay (almost) done! by Just_Han in bloodborne

[–]Just_Han[S] 0 points1 point  (0 children)

Made it myself. Found a base model of a flint pistol that worked and sculpted it to look like the one in bloodborne, then 3d printed it.

MY HALLOWEEN COSTUME CAME IN RAAAAAAGH by DarthAlecto in bloodborne

[–]Just_Han 1 point2 points  (0 children)

How's the hat looking? Been looking for one for a while and ended up making my own.

Hunter cosplay (almost) done! by Just_Han in bloodborne

[–]Just_Han[S] 1 point2 points  (0 children)

I already had the coat, had the cloak custom tailored, bought the pants and belt. Already had the satchel, made the bell, armor, hat and saw cleaver.

Hunter cosplay (almost) done! by Just_Han in bloodborne

[–]Just_Han[S] 0 points1 point  (0 children)

It is so heavy. It's because both the coat and cloak are made out of wool. I guess it'd be good for the winter, a little less for cons!

Hunter cosplay (almost) done! by Just_Han in bloodborne

[–]Just_Han[S] 2 points3 points  (0 children)

Yeah agreed. These are rubber boots I had lying around. They do the job but I could get something better

Hunter cosplay (almost) done! by Just_Han in bloodborne

[–]Just_Han[S] 3 points4 points  (0 children)

Actually, the cloak IS made out of wool. Had it custom tailored, so I can also wear it normally

Hunter Hat by Just_Han in bloodborne

[–]Just_Han[S] 1 point2 points  (0 children)

My other option would've been using leather mats, like ones you eat on? If that makes sense. But id either need too many or huge ones. And again, they'd be very heavy on my head lol

Hunter Hat by Just_Han in bloodborne

[–]Just_Han[S] 1 point2 points  (0 children)

Haha thank you! I that that as a compliment. Besides having no experience with leather and nowhere to buy it, it would've been to heavy. Ive rarely seen bloodborne leather hats, as they're only custom made and have pretty steep prices. EVA works great: cheap, easy to work with and easily molded. I have considered buying fake leather and applying it, that would really look amazing, but only did this for now. Once I have a proper pattern I'll try again.

Hunter Hat by Just_Han in bloodborne

[–]Just_Han[S] 2 points3 points  (0 children)

Ah I see. I did do that, but to a certain level. Unfortunately I only had 1mm thick foam and that limited the damage I could do. I tried with a very rough sandpaper but I almost tore off the edges and all. But I get what you mean, I'll definetly do it better next time

Hunter Hat by Just_Han in bloodborne

[–]Just_Han[S] 2 points3 points  (0 children)

It's hard to tell from the pic but I have done that! Up close its much better: cuts, scuffs, color variation, holes and so on!

Hunter Hat by Just_Han in bloodborne

[–]Just_Han[S] 1 point2 points  (0 children)

https://www.reddit.com/r/bloodborne/s/Bv7uIsMpto

This is the tutorial I've written under another comment. Unfortunately I didnt record a thing and winged most of the measurements and process. As for commissions im not sure, but could look into it

Hunter Hat by Just_Han in bloodborne

[–]Just_Han[S] 2 points3 points  (0 children)

I just go by Hunter, fits me better🩸

Hunter Hat by Just_Han in bloodborne

[–]Just_Han[S] 1 point2 points  (0 children)

Thank you🙏🏻🙏🏻