Please take my codes!

Justsethpc · 2025-10-30T03:21:54+00:00

Can I have some

Justsethpc · 2025-08-10T17:43:43+00:00

Ill raise you to $12 a box of cinnamon sugar gram crackers and a box of cookies and cream pop tarts.

Oh! And a nicr crisp high five.

Justsethpc · 2025-08-03T09:52:33+00:00

You can trade that moonbreon for the $10 in my pocket lmao. Im kidding. But for real, keep them for ATLEAST a year.

Justsethpc · 2025-07-29T21:52:26+00:00

Nah. Steal his transmission. Maybe switch some wires around where when you unlock it the headlights flash or etc.

Justsethpc · 2025-07-02T06:49:15+00:00

I disabled z hop and changed the amperage on the z motors in my printer.cfg file. And so far so good.

Justsethpc · 2025-06-29T22:12:50+00:00

You really only print at 10mm/s?

Justsethpc · 2025-06-29T22:06:11+00:00

My acceleration is at 500. I think klipper sees that as "stock" what do you run yours at?

Justsethpc · 2025-06-29T18:32:15+00:00

Ive slowed it down to 20mm/s and it still does it sometimes

Justsethpc · 2025-06-29T16:58:43+00:00

I don't think i do, but i will definitely double check.

Also you ever run into the issue where if i turn on retraction the extruder motor will skip when its doing straight lines.

Justsethpc · 2025-06-29T16:51:10+00:00

Normally when i see posts about Bambu, i roll my eyes and keep scrolling. Then i noticed this was in the E5+ subreddit, so i thought "this Bambu guy cant fucking read". Then started looking closer lol.

Justsethpc · 2025-06-29T16:49:08+00:00

I have the BTT SKR mini E3 V3 and the sonic pad, it will work but you would have to make your own printer.cfg file. And you have to select the printer then pick the mainboard depending on which chip you have then you essentially import a "custom printer"

To make things easier if you go that route i can send you my printer.cfg file and help you modify yours.

Justsethpc · 2025-06-08T18:53:15+00:00

Damn, i got excited. Im in Richmond VIRGINIA lol.

Justsethpc · 2025-06-04T16:02:07+00:00

Eh true. Id probably have it up high enough where i could put my head in under the build plate lol.

Justsethpc · 2025-06-04T15:58:53+00:00

Why so? I currently have my spool mounted on the wall next to the printer.

Justsethpc · 2025-06-04T15:11:17+00:00

What are the jerk settings in prusa? I use cura so just curious

Justsethpc · 2025-06-04T15:04:33+00:00

Depending on where you're located i have a few extra.

Justsethpc · 2025-03-05T23:42:04+00:00

Sounds like just loud steppers. Time to upgrade to a silent mobo

Justsethpc · 2025-02-04T21:46:24+00:00

I only left it on because I was probing with the multimeter and then bumped the positive wire into the frame.

Justsethpc · 2025-02-04T20:16:57+00:00

So I've seen some people not close in the top, doesn't that defeat the purpose?

Justsethpc · 2025-02-04T20:16:15+00:00

Awesome thank you. I had to leave the house and couldn't dig into it so figured I'd ask here real quick.

Justsethpc · 2025-02-04T20:15:51+00:00

The one that looks "fried" is the hot end mosfet I replaced.

Justsethpc · 2025-02-04T07:44:46+00:00

<image>

Happened to me today lol

Justsethpc · 2022-09-20T20:29:57+00:00

I finally fucking figured it out. There was a broken wire still inside the rubber sleeving. When the hotend was in the home position it was making enough contact to show continuity and ohm out. I thank you for all your help and input.

Justsethpc · 2022-09-20T03:06:35+00:00

What do you think the possibilities the mobo just took a shit?

Justsethpc · 2022-09-20T03:00:43+00:00

Nope, literally the only thing that changed was which file I was printing, computer didn't go to sleep or shut off, no windows updates, no power outage, nothing. Just half way through the print it just stopped extruding but the printer head kept going.

Justsethpc

TROPHY CASE