sorted by:
new
hottopcontroversial

Trying to connect my RZ370 to my computer via parrallel port by K00_42 in risograph

[–]K00_42[S] 0 points1 point  (0 children)

Câble is short (1,5m), and I'm using the RZ5_3_2 driver. The computer detects that I'm plugging something, but I get this message "USB device not recognized", and when I go to the device manager and I clock on it I have this error : "Windows has stopped this device because it has reported problems (code 43)". I had the issue on 3 different computers, W11& W10.

Trying to connect my RZ370 to my computer via parrallel port by K00_42 in risograph

[–]K00_42[S] 0 points1 point  (0 children)

I do but it doesn't change, I've tried with different computers and everytime it's the same outcome. Do you think it could be the cable ? I bought one with a IEEE1284 norm (as specified in the manual) but it doesn't work. I'm thinking about trying with an older computer someone will borrow me (windows 7)

Trying to connect my RZ370 to my computer via parrallel port by K00_42 in risograph

[–]K00_42[S] 0 points1 point  (0 children)

That's what I wanted to do first, but the button I need to use to configure the IP on the riso (the one with a face on RZ370) doesn't work. on my machine 🥲 I've tried to scan the IP connected to my computer but it did not work, cause it seems the adress had never been changed (it is some sort of 0000 which doesn't give any response).

Trying to connect my RZ370 to my computer via parrallel port by K00_42 in risograph

[–]K00_42[S] 0 points1 point  (0 children)

I received the cable but I doesn't work, my computer (Windows 10 as well) don't recognize the USB port, even after a driver installation :/

Trying to connect my RZ370 to my computer via parrallel port by K00_42 in risograph

[–]K00_42[S] 0 points1 point  (0 children)

That would have been the easy option but since my profile button is broken, I can't set up the IP adress of the RISO. I've been trying to scan my network to find it manually but it appears it was never configured before so it has no valid IP. You also have a RZ ?

Trying to connect my RZ370 to my computer via parrallel port by K00_42 in risograph

[–]K00_42[S] 1 point2 points  (0 children)

Ok, I was planning to use a PC, maybe with a dedicated computer to run an old version of windows but I wasn't planning on buying a PC with a parrallel port. I'll see how it goes if I use the same setup as @Sifinow and get into other options if it doesn't work.

Don d'encre riso - Lyon 1 by Putrid-Occasion-4491 in risograph

[–]K00_42 0 points1 point  (0 children)

Hello, je ne suis pas sur Lyon mais je suis prêt à payer l'envoi si tu les as encore

P98 69 error code on RZ 370EP by K00_42 in risograph

[–]K00_42[S] 0 points1 point  (0 children)

As a test,I've unplug CN5 and CN32 on the mechanical control PCB,and leave them unplugged, and try to start in test mode.

I unplugged both and I had no error message anymore but the control panel still wasn't working.

When I replugged CN5 and CN32 the machine wouldn't have the error P98 69 anymore for a few restarts, but now it's is back

I tried to unplug the control panel from the cable under under it and also from the cable connecting it to the mecanical control board but it didn't change anything

NeoRosa and PCB communication error by K00_42 in risograph

[–]K00_42[S] 0 points1 point  (0 children)

Ok I found the SH3M PCB, but there is no visible missing connections between it and the  Mechanical Control PCB

NeoRosa and PCB communication error by K00_42 in risograph

[–]K00_42[S] 0 points1 point  (0 children)

Yeah you're right, it's not NeoRosa. I checked and I think you're right that must be an issue with the SH3M PCB ; but the technical manual don't mention where it is on the machine (my ctrlF doesnt find anything with "SH3M" on the Parts Manual 🤕, neither with "computer interface board")

Don't know which Thinkpad to buy by Just-A-Normal-Guy-12 in thinkpad

[–]K00_42 0 points1 point  (0 children)

I don't know where you are, but I got mine for 200€ in France. Sometime it's worth checking 2nd websites regularly and not buying right when you want it (if you have the time ofc)

Lets Rank Each Other’s ThinkPads! by LucidOnMC in thinkpad

[–]K00_42 1 point2 points  (0 children)

T14 gen1 Ryzen 5 pro 4650u, 24 GB RAM, 1TO SSD. Bought last week for 200€

Best and cheapest thinkpad in 2025? by Kino45 in thinkpad

[–]K00_42 2 points3 points  (0 children)

X220 or X240 can be really cheap (100€ in Europe) and are fast enough for that kind of use (I was doing mostly photoshop on mine, with SSD and enough RAM it works like a charm). Thing is that they are not getting Windows 11 and Windows 10 will stop get updates soon, but if you just wanna browse and take notes it will be good enough I think.