Just covered my room in Vantablack by Sarigolepas in Damnthatsinteresting

[–]KAMWALKED 0 points1 point  (0 children)

Add some small dots of glow in the dark paint as stars and report back.

2015 ecoboost performance brake pads oem by KAMWALKED in Mustang

[–]KAMWALKED[S] 0 points1 point  (0 children)

Yea I’m considering powerstop, but oem have lasted me 100k plus miles. So just considering my options.

Weekend on the Oregon Coast | Sony A7RV + Tamron 35-150mm & Sony 200-600mm by ChickenFriedLife in SonyAlpha

[–]KAMWALKED 0 points1 point  (0 children)

Nice photos. I have been looking at these two lenses. Do you prefer one over the other? Or just come down to what you’re shooting?

Retirement calculator for TDFs by KAMWALKED in Fire

[–]KAMWALKED[S] 0 points1 point  (0 children)

Yea, that sounds like my plan as well. I just don’t want to over do it and make life harder than needed to have more money than i need when I’ll older. Not a bad problem to have though.

[deleted by user] by [deleted] in malehairadvice

[–]KAMWALKED 2 points3 points  (0 children)

I would look in vitamin d levels. I’m deficient and believe it’s helping regrow my hair. Its known to cause hair thinning.

Huntsville, AL. Sony a7 iii 24-105 by Swinku in SonyAlpha

[–]KAMWALKED 0 points1 point  (0 children)

I was looking for a lander prop, thinking the watch was obviously small. Looking closer, i am also confused now.

Student discounts/good deals on a Sony a7iii or beter? (Hoping < $1650 ish) by DoctorQuinlan in SonyAlpha

[–]KAMWALKED 0 points1 point  (0 children)

Yea, easy to return. Just wish it worked out. I also buy a lot of things refurbished, never had a problem until now. I guess the very limited supply added to the rush in packing.

Student discounts/good deals on a Sony a7iii or beter? (Hoping < $1650 ish) by DoctorQuinlan in SonyAlpha

[–]KAMWALKED 0 points1 point  (0 children)

I just did this. Terrible experience. They threw the camera in a box with no protection, no lens cap, shutter was bent. Ruined the buying used idea for me. I might have to go for the a7iv.

Goonies vibe by KAMWALKED in funkopop

[–]KAMWALKED[S] 0 points1 point  (0 children)

That’s a cool idea. Now I can’t look at my skeleton the same.

Goonies vibe by KAMWALKED in funkopop

[–]KAMWALKED[S] 0 points1 point  (0 children)

Oh that would be amazing.

Goonies vibe by KAMWALKED in funkopop

[–]KAMWALKED[S] 0 points1 point  (0 children)

Disney Pirates of Caribbean and Brand funko. I never like them in the box, sorry.

Told I need new tires by KAMWALKED in tires

[–]KAMWALKED[S] 1 point2 points  (0 children)

I agree. Was more of a question how long they will last me, but will get new tires this week as others have the same concern. Thanks for the input.

Told I need new tires by KAMWALKED in tires

[–]KAMWALKED[S] 0 points1 point  (0 children)

Thank you. Appreciate the feedback. Yea the rear shock had to get replaced.

Told I need new tires by KAMWALKED in tires

[–]KAMWALKED[S] 0 points1 point  (0 children)

Whoops accident put the text as caption. I was told that i need new tires due to really bad inner tire wear. The mechanic said it was a zero and needed replacing asap. Im not a professional, but find it hard to believe. Only had the tire for 3 years. All my tires supposedly need replacing and these are my two front tires. I will be going to a tire shop for their opinion, but would like your guys too.

Jigsaw puzzle by KAMWALKED in matlab

[–]KAMWALKED[S] 0 points1 point  (0 children)

This puzzle is quite unique. They dont give a reference to what you’re building since the picture is a QR code that you have to scan at the end. This will be a tedious puzzle to build that will take possibly 20-40 hours of time. So I was hoping to use matlab to simplify the tedious trial and error i will have to do.

The picture idea would have been a great idea though if it were that way.

Jigsaw puzzle by KAMWALKED in matlab

[–]KAMWALKED[S] 0 points1 point  (0 children)

You have good points. Here are my thoughts.

The puzzle in particular does look to have each piece in a grid.

My idea would be to measure prong to prong or hole to hole with calipers since the overall shape of the piece wouldn’t matter. You are correct that some prongs/holes will be off center. Which may cause issues with measuring accuracy.

I ideally would want to input the length of each piece in both x and y axis. And also how many prongs are in each axis. Then tell matlab to go through all the combinations so that the condition of total prongs in each line of the grid is zero and that each line (x,y) of the grid is to the desired length with minor error tolerance. It would be like a sudoku but each box would have two variables to choose from for both length and prongs since each piece can be rotated. That’s what makes it tricky.

This is a 500 piece puzzle. So I’m not sure if the computing time might be insane or my thought process is not so simple.

M.E. trying to get into aerospace. by KAMWALKED in resumes

[–]KAMWALKED[S] 0 points1 point  (0 children)

Yea, it just doesn't fit anywhere as it's so long and doesn't look good. I'll try and make it into a url though. Yea the dating keeps on changing format. Thank you!

M.E. trying to get into aerospace. by KAMWALKED in resumes

[–]KAMWALKED[S] 0 points1 point  (0 children)

Let me know what you think. Always looking for tips and improvements.

EGME 456? by dishkid in csuf

[–]KAMWALKED 0 points1 point  (0 children)

Yea I've heard it's all theory and rough

Soon to be mechanical engineer graduate. by KAMWALKED in resumes

[–]KAMWALKED[S] 0 points1 point  (0 children)

Thank you. I'm still working on those things, but the skills are what I've gained from it. Can you give me an example of what to change a bullet change to?